Aryl ethers polymeric

Although the sulfone activated biphenyl and the ketone activated naphthalene moiety for the displacement polymerization have been reported by Attwood et al. [11], these were rediscovered by Cummings et al. [12] and Hergenrother et al. [13], respectively, for the synthesis of poly(aryl ethers). Recently, Singh and Hay [14] reported polymers containing 0-dibenzoyl benzene (1,2,3) moiety by reaction between bis(O-fluorobenzoyl) benzene or substituted benzene with bisphenates of alkali metal salt in DMAC as follows ... 

The new fluorescent poly(aryl ethers) derived from nonfluorescent monomers have gained significant attention from polymer scientists [20]. These polymers are prepared by the polymerization of phenolphthalein and its derivatives with activated aromatic difluorides. 

It is interesting to note that all the new aromatic systems, as described, undergo displacement polymerizations in DMAC solvent by the K2CO3 method, except perfluoroalkylene [10] and amide activated polymerization [9], which were performed in NMP solvent. The displacement polymerization in DMAC solvent was carried out at 155-164°C. poly(aryl ether ketones) require less reaction time (3-6 h) than other aromatic systems for synthesis of polyethers [15]. Synthesis of the fluorinated polyether as reported by Irvin et al. [16] was carried out at room temperature for 16 h (Mw = 75,000), whereas the same polymer by Mercer et al. [17] was synthesized at 120°C for 17 h (Mw = 78,970). 

Diphenol/thiophenol is one of the most important polymer precursors for synthesis of poly(aryl ethers) or poly-(aryl sulfides) in displacement polymerizations. Commonly used bisphenols are 4,4 -isopropylidene diphenol or bisphenol-A (BPA) due to their low price and easy availability. Other commercial bisphenols have also been reported [7,24,25]. Recently, synthesis of poly(aryl ethers) by the reaction of new bisphenol monomers with activated aromatic dihalides has been reported. The structures of the polymer precursors are described in Table 2. Poly(aryl ether phenylquinoxalines) have been synthesized by Connell et al. [26], by the reaction of bisphenols containing a preformed quinoxaline ring with... 

The use of other heterocyclic rings in displacement polymerization has been recently reported. Table 3 shows the new dihalo heterocyclic monomers used for synthesis of poly(aryl ethers). 

The advantage of the activated displacement polymerization is the facile incorporation of different and unconventional structural units in the polymer backbone. Most of the heteroarylene activated polyethers prepared by this route are soluble in many organic solvents. The solubility behavior of new polyethers is shown in Table 8. In contrast to many polyphenylenequi-noxalines, poly(aryl ether phenylquinoxalines) prepared by the quionoxaline activated displacement reaction are soluble in NMP. Solubility in NMP is important since it is frequently used for polymer processing in the microelectronics industry [27]. 

The quinone methide can also be generated in situ, at least in aqueous NaOH, directly from the peracetate, as hydrolysis of the phenolic acetate is faster than the benzylic acetate (see an example in Section 12.5.3). This method was used to demonstrate the addition of anthrahydroquinone (AHQ) and anthranol to (actual polymeric) lignin quinone methides in studies elucidating the anthraquinone (AQ)-catalyzed 8-0-4-aryl ether cleavage mechanisms in alkaline pulping.64-66... 

Aromatic poly(aryl ether ketone)s containing 1,4-naphthalene moieties were prepared by the reaction of a bisphenol and 2 in the presence of potassium carbonate in DM Ac at 160°C as depicted in Scheme 3. A typical polymerization was carried out as follows To a 100-ml round-bottom flask was added 8.32 g (O.OlOmol) of2, 3.36g (O.OlOmol) of4,4 -(hexafluoroisopropylidene) diphenol, 51.2 g ofDMAc, and 3.1 g (0.022 mol) of potassium carbonate. The mixture was heated to 160°C with stirring under nitrogen for 18 h. The mixture was allowed to cool to room temperature. The polymer was precipitated by pouring the reaction mixture into a blender containing about 100 ml of water, filtered, washed three times with water and dried to yield 8.1 g (92% yield) as a white powder. 

Polycondensation reactions of 2 with diphenols were carried out in DMAc at 160°C using an excess of potassium carbonate to yield viscous solutions ofthe desired poly(aryl ether ketone)s. Judging by the viscosity increase, the polymerization reaction was near completion after only about 8h at 160°C. Aqueous... 

The second part of the theory, which is a logical consequence of the first, is that monomers that have more than one basic site, e.g., an aromatic ring or an oxygen atom, can form more than one type of complex with the carbenium ion this idea was first proposed by Plesch (1990) in the context of chemically initiated polymerizations. It helps to explain why aryl alkenes and alkyl vinyl ethers polymerize more slowly than isobutene and cyclopentadiene. The reason is that all the complexes formed by the alkyl alkenes are propagators, whereas for the aryl alkenes and vinyl ethers only a fraction of the population of complexes can propagate. 

Polymeric aryl ethers have been obtained from, for example, bisphenol and 1,4-dichlorobut-2-ene or 1,4-bis(chloromethyl)benzene in a basic medium in the presence of tetra-n-butylammonium hydrogen sulphate [22],... 

Three poly(aryl ethers) were prepared and used as coblocks in imide copolymerizations. The first coblock prepared was poly(aryl ether phenylquinoxaline), since this material has the requisite high Tg ( 280 °C) and thermal stability, and the polymer can be processed from solution or the melt. The synthesis of po-ly(aryl ether phenylquinoxalines) involves a fluoro-displacement polymerization of appropriately substituted fluorophenylquinoxalines with bisphenols, us-... 

Cyclic aryl ether ketones have been prepared from l,2-bis(4-fluorobenzoyl)benzene and bisphenols under pseudo high dilution conditions. These materials undergo ring-opening polymerization in the presence of an anionic catalyst (87). 

Both XLII and XLI 11 are p-hydroxybenzyl aryl ethers so is the polymerization product (XLIV) 21) of the quinonemethide (XXI) mentioned above. Such benzyl aryl ether bonds are not very rare in lignin and are easily attacked by acids or nucleophilic reagents containing sulfur. 

Thus, the redistribution reaction does not change the degree of polymerization, does not consume oxygen other than that required for the initiation step, and can be observed independently of polymerization under suitable conditions (6) redistribution of high polymer with a monomeric phenol has been developed as a synthetic method for preparing substituted aryl ethers (18). 

MC MDI MEKP MF MMA MPEG MPF NBR NDI NR OPET OPP OSA PA PAEK PAI PAN PB PBAN PBI PBN PBS PBT PC PCD PCT PCTFE PE PEC PEG PEI PEK PEN PES PET PF PFA PI PIBI PMDI PMMA PMP PO PP PPA PPC PPO PPS PPSU Methyl cellulose Methylene diphenylene diisocyanate Methyl ethyl ketone peroxide Melamine formaldehyde Methyl methacrylate Polyethylene glycol monomethyl ether Melamine-phenol-formaldehyde Nitrile butyl rubber Naphthalene diisocyanate Natural rubber Oriented polyethylene terephthalate Oriented polypropylene Olefin-modified styrene-acrylonitrile Polyamide Poly(aryl ether-ketone) Poly(amide-imide) Polyacrylonitrile Polybutylene Poly(butadiene-acrylonitrile) Polybenzimidazole Polybutylene naphthalate Poly(butadiene-styrene) Poly(butylene terephthalate) Polycarbonate Polycarbodiimide Poly(cyclohexylene-dimethylene terephthalate) Polychlorotrifluoroethylene Polyethylene Chlorinated polyethylene Poly(ethylene glycol) Poly(ether-imide) Poly(ether-ketone) Polyethylene naphthalate Polyether sulfone Polyethylene terephthalate Phenol-formaldehyde copolymer Perfluoroalkoxy resin Polyimide Poly(isobutylene), Butyl rubber Polymeric methylene diphenylene diisocyanate Poly(methyl methacrylate) Poly(methylpentene) Polyolefins Polypropylene Polyphthalamide Chlorinated polypropylene Poly(phenylene oxide) Poly(phenylene sulfide) Poly(phenylene sulfone)... 

---