Aromatic substitution metal-catalyzed

As radical-mediated and CMD-type mechanisms failed to produce para-selectivity, we proposed to take a page out of the sophomore organic chemistry book to develop a new amination reaction by using an electrophilic aromatic substitution metalation step. Inspired by highly para-selective Au-catalyzed... 

The general approaches for the synthesis of poly(arylene ether)s include electrophilic aromatic substitution, nucleophilic aromatic substitution, and metal-catalyzed coupling reactions. Poly(arylene ether sulfone)s and poly(arylene ether ketone)s have quite similar structures and properties, and the synthesis approaches are quite similar in many respects. However, most of the poly(arylene ether sul-fone)s are amorphous while some of the poly(arylene ether)s are semicrystalline, which requires different reaction conditions and approaches to the synthesis of these two polymer families in many cases. In the following sections, the methods for the synthesis of these two families will be reviewed. 

Synthetically important substitutions of aromatic compounds can also be done by nucleophilic reagents. There are several general mechanism for substitution by nucleophiles. Unlike nucleophilic substitution at saturated carbon, aromatic nucleophilic substitution does not occur by a single-step mechanism. The broad mechanistic classes that can be recognized include addition-elimination, elimination-addition, and metal-catalyzed processes. (See Section 9.5 of Part A to review these mechanisms.) We first discuss diazonium ions, which can react by several mechanisms. Depending on the substitution pattern, aryl halides can react by either addition-elimination or elimination-addition. Aryl halides and sulfonates also react with nucleophiles by metal-catalyzed mechanisms and these are discussed in Section 11.3. 

Transition Metal-Catalyzed Aromatic Substitution Reactions... 

Chapter 11 focuses on aromatic substitution, including electrophilic aromatic substitution, reactions of diazonium ions, and palladium-catalyzed nucleophilic aromatic substitution. Chapter 12 discusses oxidation reactions and is organized on the basis of functional group transformations. Oxidants are subdivided as transition metals, oxygen and peroxides, and other oxidants. 

Direct aromatic substitution of unactivated aryl halides is slow and generally requires a catalyst to become a useful synthetic method. Copper reagents have been used in some cases in classical procedures for the formation of products from aromatic substitution. In many cases these copper-mediated reactions occur at high temperatures and are substrate dependent. Since the 1970s, transition metal catalysts have been developed for aromatic substitution. Most of the early effort toward developing metal-catalyzed aromatic substitution focused on the formation of... 

In more recent work by other researchers, sealed-vessel microwave technology has been utilized to access valuable medicinally relevant heterocyclic scaffolds or intermediates (Scheme 6.120) [240-245]. Additional examples not shown in Scheme 6.120 can be found in the most recent literature (see also Scheme 6.20) [246-249]. Examples of nucleophilic aromatic substitutions in the preparation of chiral ligands for transition metal-catalyzed transformations are displayed in Scheme 6.121 [106,108]. 

This chapter is concerned with reactions that introduce or replace substituent groups on aromatic rings. The most important group of reactions is electrophilic aromatic substitution. The mechanism of electrophile aromatic substitution has been studied in great detail, and much information is available about structure-reactivity relationships. There are also important reactions which occur by nucleophilic substitution, including reactions of diazonium ion intermediates and metal-catalyzed substitution. The mechanistic aspects of these reactions were discussed in Chapter 10 of Part A. In this chapter, the synthetic aspects of aromatic substitution will be emphasized. 

Besides a variety of other methods, phenols can be prepared by metal-catalyzed oxidation of aromatic compounds with hydrogen peroxide. Often, however, the selectivity of this reaction is rather poor since phenol is more reactive toward oxidation than benzene itself, and substantial overoxidation occurs. In 1990/91 Kumar and coworkers reported on the hydroxylation of some aromatic compounds using titanium silicate TS-2 as catalyst and hydrogen peroxide as oxygen donor (equation 72) . Conversions ranged from 54% to 81% with substituted aromatic compounds being mainly transformed into the ortho-and para-products. With benzene as substrate, phenol as the monohydroxylated product... 

Substitution of halopurines at C-2 and C-6 has become a well-developed synthetic process, with a wide variety of nucleophilic aromatic substitution and palladium-catalyzed C-N or C-O hond formations exemplified in the literature. The use of selective, sequential substitution reactions on polyhalopurine scaffolds is the basis of an increasing number of combinatorial syntheses of polysubstituted purines, both in solution and on solid phase. The introduction of N-, 0-, or S-substituents has often been combined with transition metal-catalyzed C-C bond-forming reactions (see Section 10.11.7.4.2) and selective N-alkylation (see Section 10.11.5.2.1) to provide versatile routes to purines with multiple, diverse substituents. 

The introduction of nucleophiles onto five membered heterocycles through non-catalyzed aromatic nucleophilic substitution is of little synthetic value, since the comparatively high electron density of the aromatic ring makes the nucleophilic attack unfavourable. The introduction of transition metal catalyzed carbon-heteroatom bond forming reactions overcame this difficulty and led to a rapid increase in the number of such transformations. 

Phase transfer was used to catalyze nucleophilic aromatic substitutions by Makosza et al. in 1974.201 202 Zoltewicz203 has given a good early review of various methods and has compared other techniques that make use of polar solvents, transition metals, and monoelectron transfers. 

Aryl- and heteroaryl halides can undergo thermal or transition metal catalyzed substitution reactions with amines. These reactions proceed on insoluble supports under conditions similar to those used in solution. Not only halides, but also thiolates [76], nitro groups [76], sulfinates [77,78], and alcoholates [79] can serve as leaving groups for aromatic nucleophilic substitution. 

Other processes, limited to heteroaromatic systems, include the Sn(ANRORC) reaction (Scheme 4),17,18 and ring transformation reactions.18,19 Reactions which proceed via a-adduct intermediates, but do not lead to substitution on the aromatic nuclei, such as the Sn(AEAE) reaction,20 or give nonaromatic products, are not included. Also not covered are processes involving aryl-metal intermediates, such as most copper-catalyzed aromatic substitutions. 

Substituted imidazole 1-oxides 228 are predicted to be activated toward electrophilic aromatic substitution, nucleophilic aromatic substitution, and metallation as described in Section 1. Nevertheless little information about the reactivity of imidazole 1-oxides in these processes exists. The reason for this lack may be the high polarity of the imidazole 1-oxides, which makes it difficult to find suitable reaction solvents. Another obstacle is that no method for complete drying of imidazole 1-oxides exists and dry starting material is instrumental for successful metallation. Well documented and useful is the reaction of imidazole 1-oxide 228 with alkylation and acylation reagents, their function as 1,3-dipoles in cycloadditions, and their palladium-catalyzed direct arylation. 

Noteworthy as more frequent than previously are applications of transition metal catalyzed cross-couplings in their numerous modifications to functionalize the pyrrole ring, which often can be formally classified as aromatic nucleophilic substitutions <2006EJ03043>. 

The author believes that students are well aware of the basic reaction pathways such as substitutions, additions, eliminations, aromatic substitutions, aliphatic nucleophilic substitutions and electrophilic substitutions. Students may follow undergraduate books on reaction mechanisms for basic knowledge of reactive intermediates and oxidation and reduction processes. Reaction Mechanisms in Organic Synthesis provides extensive coverage of various carbon-carbon bond forming reactions such as transition metal catalyzed reactions use of stabilized carbanions, ylides and enamines for the carbon-carbon bond forming reactions and advance level use of oxidation and reduction reagents in synthesis. 

Selective reduction to hydroxylamine can be achieved in a variety of ways the most widely applicable systems utilize zinc and ammonium chloride in an aqueous or alcoholic medium. The overreduction to amines can be prevented by using a two-phase solvent system. Hydroxylamines have also been obtained from nitro compounds using molecular hydrogen and iridium catalysts. A rapid metal-catalyzed transfer reduction of aromatic nitroarenes to N-substituted hydroxylamines has also been developed the method employs palladium and rhodium on charcoal as catalyst and a variety of hydrogen donors such as cyclohexene, hydrazine, formic acid and phosphinic acid. The reduction of nitroarenes to arylhydroxyl-amines can also be achieved using hydrazine in the presence of Raney nickel or iron(III) oxide. ... 

Example 4.21. A metal-catalyzed, intramolecular, electrophilic aromatic substitution. 

---