Aromatic compounds, hydrogenation

Carbon Black Oil Usually a viscous, highly aromatic residual oil utilized in the manufacture of carbon black. These oils may also contain polynuclear aromatic compounds, hydrogen sulfide, and ash. 

The Pd nanoparticles synthesized in the CO2 microemulsion are effective for hydrogenation of C02-soluble and water-soluble olefins but are not effective for hydrogenation of aromatic compounds. Hydrogenation of arenes is conventionally carried out with heterogeneous catalysts. Bonilla et al. recently reported a Rh catalyzed hydrogenation of arenes in a water/supercritical ethane biphasic system (35). Hydrogenation occurred well in this biphasic system with excellent results obtained for a number of arenes after 62 hours of reaction... 

Carrier, M.N., C. Scheer, P. Gouvine, J.F. Bartoli, P. Battioni, and D. Mansuy (1990). Biomimehc hydroxylation of aromatic compounds Hydrogen peroxide and manganese-polyhalogenated porphyrins as a particularly good. Tetrahedron Lett. 31, 6645-6648. 

It is a typically aromatic compound and gives addition and substitution reactions more readily than benzene. Can be reduced to a series of compounds containing 2-10 additional hydrogen atoms (e.g. tetralin, decalin), which are liquids of value as solvents. Exhaustive chlorination gives rise to wax-like compounds. It gives rise to two series of monosubstitution products depending upon... 

HMO theory is named after its developer, Erich Huckel (1896-1980), who published his theory in 1930 [9] partly in order to explain the unusual stability of benzene and other aromatic compounds. Given that digital computers had not yet been invented and that all Hiickel s calculations had to be done by hand, HMO theory necessarily includes many approximations. The first is that only the jr-molecular orbitals of the molecule are considered. This implies that the entire molecular structure is planar (because then a plane of symmetry separates the r-orbitals, which are antisymmetric with respect to this plane, from all others). It also means that only one atomic orbital must be considered for each atom in the r-system (the p-orbital that is antisymmetric with respect to the plane of the molecule) and none at all for atoms (such as hydrogen) that are not involved in the r-system. Huckel then used the technique known as linear combination of atomic orbitals (LCAO) to build these atomic orbitals up into molecular orbitals. This is illustrated in Figure 7-18 for ethylene. 

Figure 8-7, Comparison of tlie RDF code for aromatic compounds with different subslilulic patterns (hydrogen atoms are not considered).

The catalyst is inactive for the hydrogenation of the (isolated) benzene nucleus and so may bo used for the hydrogenation of aromatic compounds containing aldehyde, keto, carbalkoxy or amide groups to the corresponding alcohols, amines, etc., e.g., ethyl benzoate to benzyl alcohol methyl p-toluate to p-methylbenzyl alcohol ethyl cinnamate to 3 phenyl 1-propanol. 

The unexpected preference for the interfacial region at lower concentrations of benzene has prompted speculation. It has been demonstrated that aromatic compounds are capable of forming weak hydrogen bonds with water. This ability favours uptake in the aqueous interface over solubilisation in the interior. Alternatively, some authors have attributed the binding behaviour of benzene to its... 

As well as the cr-complexes discussed above, aromatic molecules combine with such compounds as quinones, polynitro-aromatics and tetra-cyanoethylene to give more loosely bound structures called charge-transfer complexes. Closely related to these, but usually known as Tt-complexes, are the associations formed by aromatic compounds and halogens, hydrogen halides, silver ions and other electrophiles. 

The Pd—C cr-bond can be prepared from simple, unoxidized alkenes and aromatic compounds by the reaction of Pd(II) compounds. The following are typical examples. The first step of the reaction of a simple alkene with Pd(ll) and a nucleophile X or Y to form 19 is called palladation. Depending on the nucleophile, it is called oxypalladation, aminopalladation, carbopalladation, etc. The subsequent elimination of b-hydrogen produces the nucleophilic substitution product 20. The displacement of Pd with another nucleophile (X) affords the nucleophilic addition product 21 (see Chapter 3, Section 2). As an example, the oxypalladation of 4-pentenol with PdXi to afford furan 22 or 23 is shown. 

Electrophilic aromatic substitution (Section 12 1) Fundamen tal reaction type exhibited by aromatic compounds An electrophilic species (E" ) attacks an aromatic ring and re places one of the hydrogens... 

Hydrogenation of the aromatic ring to form naphthenic compounds has been proposed as a route to faciUtate the separation of the Cg aromatic isomers (31). The spread in boiling points of the naphthenic compounds is 12°C vs a spread of 8°C for the aromatic compounds. However, the cycloparaffinic products obtained from OX and EB boil only 3°C apart, impeding the separation. 

CoF is used for the replacement of hydrogen with fluorine in halocarbons (5) for fluorination of xylylalkanes, used in vapor-phase soldering fluxes (6) formation of dibutyl decalins (7) fluorination of alkynes (8) synthesis of unsaturated or partially fluorinated compounds (9—11) and conversion of aromatic compounds to perfluorocycHc compounds (see Fluorine compounds, organic). CoF rarely causes polymerization of hydrocarbons. CoF is also used for the conversion of metal oxides to higher valency metal fluorides, eg, in the assay of uranium ore (12). It is also used in the manufacture of nitrogen fluoride, NF, from ammonia (13). 

In order to increase the solubiUty parameter of CPD-based resins, vinyl aromatic compounds, as well as other polar monomers, have been copolymerized with CPD. Indene and styrene are two common aromatic streams used to modify cyclodiene-based resins. They may be used as pure monomers or contained in aromatic steam cracked petroleum fractions. Addition of indene at the expense of DCPD in a thermal polymerization has been found to lower the yield and softening point of the resin (55). CompatibiUty of a resin with ethylene—vinyl acetate (EVA) copolymers, which are used in hot melt adhesive appHcations, may be improved by the copolymerization of aromatic monomers with CPD. As with other thermally polymerized CPD-based resins, aromatic modified thermal resins may be hydrogenated. 

Chloromethjlation Reactions. The introduction of the chloromethyl group to both aHphatic and aromatic compounds is carried out by reaction of paraformaldehyde [30525-89-4] and hydrogen chloride. This method is used for synthesizing methyl chloromethyl ether [107-30-2], benzyl chloride [100-44-7], and chloromethyl acetate. 

Olefin Complexes. Silver ion forms complexes with olefins and many aromatic compounds. As a general rule, the stabihty of olefin complexes decreases as alkyl groups are substituted for the hydrogen bonded to the ethylene carbon atoms (19). 

Aromatic compounds may be chlorinated with chlorine in the presence of a catalyst such as iron, ferric chloride, or other Lewis acids. The halogenation reaction involves electrophilic displacement of the aromatic hydrogen by halogen. Introduction of a second chlorine atom into the monochloro aromatic stmcture leads to ortho and para substitution. The presence of a Lewis acid favors polarization of the chlorine molecule, thereby increasing its electrophilic character. Because the polarization does not lead to complete ionization, the reaction should be represented as shown in equation 26. 

It resembles tetracyanoethylene in that it adds reagents such as hydrogen (31), sulfurous acid (31), and tetrahydrofuran (32) to the ends of the conjugated system of carbon atoms suffers displacement of one or two cyano groups by nucleophilic reagents such as amines (33) or sodiomalononittile (34) forms TT-complexes with aromatic compounds (35) and takes an electron from iodide ion, copper, or tertiary amines to form an anion radical (35,36). The anion radical has been isolated as salts of the formula (TCNQ) where is a metal or ammonium cation, and n = 1, 1.5, or 2. Some of these salts have... 

In 1968 the Monsanto Company announced the availability of novel soluble low molecular weight polyphenylene resins. These may be used to impregnate asbestos or carbon fibre and then cross-linked to produce heat-resistant laminates. The basic patent (BP 1037111) indicates that these resins are prepared by heating aromatic sulphonyl halides (e.g. benzene-1,3-disulphonyl dichloride) with aromatic compounds having replaceable nuclear hydrogen (e.g. bisphenoxy-benzenes, sexiphenyl and diphenyl ether). Copper halides are effective catalysts. The molecular weight is limited initially by a deficiency in one component. This is added later with further catalyst to cure the polymer. 

One approach by Monsanto (described in the basic patent BP 1037111) is to prepare a modified polypenylene by reacting an aromatic sulphonyl halide such as benzene-1,3-disulphonyl dichloride with an aromatic compound having replaceable nuclear hydrogen (e.g. bisphenoxybenzene, sexiphenyl and diphenyl ether). This was discussed in Chapter 21. 

---