Aromatic carbons radical polymerization

Styrene is a colorless Hquid with an aromatic odor. Important physical properties of styrene are shown in Table 1 (1). Styrene is infinitely soluble in acetone, carbon tetrachloride, benzene, ether, / -heptane, and ethanol. Nearly all of the commercial styrene is consumed in polymerization and copolymerization processes. Common methods in plastics technology such as mass, suspension, solution, and emulsion polymerization can be used to manufacture polystyrene and styrene copolymers with different physical characteristics, but processes relating to the first two methods account for most of the styrene polymers currendy (ca 1996) being manufactured (2—8). Polymerization generally takes place by free-radical reactions initiated thermally or catalyticaHy. Polymerization occurs slowly even at ambient temperatures. It can be retarded by inhibitors. 

Other radical reactions not covered in this chapter are mentioned in the chapters that follow. These include additions to systems other than carbon-carbon double bonds [e.g. additions to aromatic systems (Section 3.4.2.2.1) and strained ring systems (Section 4.4.2)], transfer of heteroatoms [eg. chain transfer to disulfides (Section 6.2.2.2) and halocarbons (Section 6.2.2.4)] or groups of atoms [eg. in RAFT polymerization (Section 9.5.3)], and radical-radical reactions involving heteroatom-centered radicals or metal complexes [e g. in inhibition (Sections 3.5.2 and 5.3), NMP (Section 9.3.6) and ATRP (Section 9.4)]. 

Other coupling reactions were also employed to prepare poly(arylene etherjs. Polymerization of bis(aryloxy) monomers was demonstrated to occur in the presence of an Fe(III) chloride catalyst via a cation radical mechanism (Scholl reaction).134 This reaction also involves carbon-carbon bond formation and has been used to prepare soluble poly(ether sulfone)s, poly(ether ketone)s, and aromatic polyethers. 

Composition of Parent Pitch. Once the chemical composition of the carbonizing system moves away from the comparative simplicity of polynuclear aromatic hydrocarbons to that of industrial pitches, then the pyrolysis chemistry incorporates effects caused by the presence of heteroatoms (0, N and S) and alkyl and naphthenic groups. In general terms, the system becomes more Reactive creating higher concentrations of radicals detectable by ESR. This in turn, leads to enhanced cross-linkages and polymerization of molecular constituents of any mesophase which is formed, and this causes enhanced viscosity and a reduction in size of optical texture. 

More recently, MPO-mediated oxidation of tyrosine to dityrosine (o o -dityrosine, or 3,3 -diiyrosine) focused attention as a marker reaction of neutrophile-dependent oxidative damage of proteins and peptides (G11, H14, S3). The reaction occurs both with free tyrosine as well as with tyrosyl residues incorporated into polypeptide structures. The mechanism of dityrosine formation utilizes a relatively long-lived phenoxyl radical that cross-links to dimeric and polymeric structures by formation of carbon-carbon bonds between the aromatic moieties of phenolic tyrosine residues (H14) (Fig. 9). 

The heat and ozone resistant [126] EPR was made by incorporating acrylic rubber, dicumyl peroxide, triaUyl cyanurate, ZnO and carbon-black into the matrix. Triallyl cyanurate increases the crosslinking efficiency probably due to an addition reaction between polymeric and aUyl radicals and leads to stable chemical crosslinks. Thus ozone because there is no unsaturation cannot initiate a degradation reaction. Digteva et al. [127] prepared sealants for use at high temperature by adding aromatic diaminodisulfide, MgO, ZnO and carbon black in EPR. The aromatic diaminodisulfide is an antiozonant and functions both as an antioxidant and a... 

---