Aqueous systems switching

A rhodium(l)-catalyzed system in THF is also effective in the Mizoroki-Heck-type reaction of arylsilanediols with acrylates (Scheme 4).53 Interestingly, the use of aqueous THF switches the reaction to 1,4-addition forming /3-arylated esters. The proposed catalytic cycles for these reactions involve 1,4-addition of an arylrhodium species to an acrylate. The change of the reaction pathway is probably because, in aqueous THF, the resultant Rh enolate 6 undergoes protonolysis rather than /3-elimination. Similar Rh-catalyzed 1,4-additions to a,/3-unsaturated carbonyl compounds have been achieved with arylsilicones,54 arylchlorosilanes,55 and aryltrialkoxysilanes.56,57 The use of a cationic Rh-binap complex leads to highly enantioselective 1,4-additions of alkenyl- and arylsilanes.58 583... 

A recent proposal concerns mixed organic-aqueous tunable solvents (OATS) such as dimethyl ether-water, the solubility of which for substrates can be influenced by a third component such as carbon dioxide. CO2 acts as a antisolvent and as a switch to cause a phase separation and to decant the phases from each other (preferably under pressure). This behavior makes the operation of bi- or multiphase homogeneous catalytic processes easier and more economic the preferential dissolution at modest pressure of carbon dioxide causes phase separation which results in large distribution coefEcients of target molecules in biphasic organic-aqueous systems. This extraordinary behavior lead to a sophisticated flow scheme (Figure 6) [7]. 

The coupling of polymeric building blocks can result in amphi-philicity when one block is hydrophilic and the other one is hydrophobic. In dilute solution, miaophase separation of amphiphilic block copolymers is known to drive self-assembly to form equilibrium morphologies, such as spherical and cylindrical micelles as well as vesicles. " The exact stmcture is determined by the 3D shape of the amphiphile. Block copolymers can also be designed to switch their amphiphilidty on or off according to external stimuli. In aqueous systems, these polymers are known as double hydrophilic block copolymers. ... 

Figure 2.12 Schematic representation of an on-line SPE-GC system consisting of three switching valves (VI-V3), two pumps (a solvent-delivery unit (SDU) pump and a syringe pump) and a GC system equipped with a solvent-vapour exit (SVE), an MS instrument detector, a retention gap, a retaining precolumn and an analytical column. Reprinted from Journal of Chromatography, AIIS, A. J. H. Eouter et al, Analysis of microcontaminants in aqueous samples hy fully automated on-line solid-phase extraction-gas chromatography-mass selective detection , pp. 67-83, copyright 1996, with permission from Elsevier Science.

Subsequently, cationic rhodium catalysts are also found to be effective for the regio- and stereoselective hydrosilation of alkynes in aqueous media. Recently, Oshima et al. reported a rhodium-catalyzed hydrosilylation of alkynes in an aqueous micellar system. A combination of [RhCl(nbd)]2 and bis-(diphenylphosphi no)propanc (dppp) were shown to be effective for the ( >selective hydrosilation in the presence of sodium dodecylsulfate (SDS), an anionic surfactant, in water.86 An anionic surfactant is essential for this ( )-selective hydrosilation, possibly because anionic micelles are helpful for the formation of a cationic rhodium species via dissociation of the Rh-Cl bond. For example, Triton X-100, a neutral surfactant, gave nonstereoselective hydrosilation whereas methyltrioctylammonium chloride, a cationic surfactant, resulted in none of the hydrosilation products. It was also found that the selectivity can be switched from E to Z in the presence of sodium iodide (Eq. 4.47). 

From his initial work on the studies of solvent properties of non-aqueous solvents and later on the measurement of ultrasonic velocity, Prof. Pankaj switched over to sono-chemical studies in aqueous solutions involving inorganic systems, after his European Community Post-Doctoral Fellowship (1990 - 91) at the Department of Physics,... 

A six-port valve was used in both manual and semi-automated SPME interfaces and PEEK tubing used to connect the HPLC system to the SPME probe. A Cohesive HTLC 2300 with dual pumps along with a Sciex API 3000 mass spectrometer was used for LC/MS/MS and a Symmetry Shield RP-18 (5 ji, 50 x 2.1 mm) for HPLC. A quaternary pump with flow switching was used for desorption chamber flushing along with MS make-up flow and a binary pump for LC/MS/MS. Acetoni-trile/0.1% acetic acid in water (90 10, solvent B) and 10 90 acetonitrile/0.1% aqueous acetic acid (solvent A) were used, with 10% B for 0.5 min ramped to 90% B in 2 min and held at this concentration for 1.5 min before returning to 10% B for 1 min at a flow rate of 0.5 mL/min. 

Grant et al. (2002) designed a parallel system employing two HTLC columns (Cyclone, 50 x 1 mm, Cohesive Technologies) connected to one analytical column (Zorbax SB-C18, 50 x 2 mm, Hewlett Packard) on a 2300 HTLC. A polyarylethyl ketone (PAEK) six-port Valeo (Valeo Instruments, Texas) was used to increase switching speed and reduce carry-over. Peak focusing was used when the analyte was flushed from the TFC column into the analytical column by aqueous dilution. Compared to the dual column method, the overall time reduction was 1.5 to 4 min per sample with comparable data quality at the linear range of 0.1 to 100 ng/mL. 

For the given systems (ionizable selectors and solutes), a modified form of CPC was usually more favorable The so-called pH-zone-refining CPC mode, which is a kind of displacement type of chromatography. In this mode, the column is filled with the acidified stationary phase (e.g., using TFA as retainer), then injection of the sample takes place before the rotor is switched on and elution is started with a basic mobile phase (e.g., using ammonia as displacer in the aqueous mobile phase). Apparent pH and enantiomeric composition were determined for every fraction. It appeared that the enantiomers eluted in refined... 

These authors, using a horn system, also noted less striking but still significant switches towards the one-electron products in other sonoelectrochemical reductions [66] including dimethylmaleate at a lead cathode in an aqueous mixed-phosphate buffer, and benzyl bromide at a lead cathode in methanolic tetraethylammonium bromide solution (Tab. 6.16). 

---