Anilines, oxidation preparation

The vapor-phase conversion of aniline to DPA over a soHd catalyst has been extensively studied (18,22). In general, the catalyst used is pure aluminum oxide or titanium oxide, prepared under special conditions (18). Promoters, such as copper chromite, nickel chloride, phosphoric acid, and ammonium fluoride, have also been recommended. Reaction temperatures are usually from 400 to 500°C. Coke formed on the catalyst is removed occasionally by burning. In this way, conversions of about 35% and yields of 95% have been reported. Carba2ole is frequently a by-product. 

Mauveine was the first aniline dyestuff prepared on a large scale (Perkinj 1856), and is certainly closely related to the saffranine dyestuffs. Like these, it has strong basic properties, and gives similar reactions with sulphuric acid. Finally, a saffranine (para-saffranine, CjoHigNi [28]) is formed by oxidation of mauveine in acetic acid solution. The fluorescence characteristic of alcoholic saffranine solution is, however, absent with mauveine. 

The benefits of the use of micromembranes for the selective removal of one or more products during reaction have been demonstrated for equilibrium-limited reactions [398]. For example, the performance of hydrophilic ZSM-5 and NaA membranes over multichannel microreactors prepared from electro-discharge micromachining of commercial PSS plates was studied by Yeung et al. in the Knoevenagel condensation [399,400] and aniline oxidation to azoxybenzene [401], For snch kind of reactions, the zeolite micromembrane role consists of the selective removal of water, which indeed yields higher conversions, better product purity, and a reduction in catalyst deactivation in comparison to the traditional packed bed reactor. 

Chan et al. [188] first prepared the homopolymer of anthranilic acid and its copolymer with aniline by chemical polymerization in order to improve the solubility of polyaniline, to study the self-doping mechanism, and to evaluate thermal properties. The chemical polymerization of anthranilic acid was carried out using ammonium persulfate as the oxidant in the presence and absence of 1 M HCl. Copolymers of anthranilic acid and aniline were prepared in a similar manner by varying the monomer feed ratios in HCl at a pH of about 0.1. The... 

The first electrochemical oxidation of aniline to emeraldine salt was reported by Letheby in 1862 [1] as a dark-green precipitate under aqueous acidic condition. This green powdery material soon became known as "aniline black . Almost a himdred years later interest in the electrochemistry of aniline black was revived in 1962. When Mohilner et al. [23] reported mechanistic aspects of aniline oxidations. Buvet et al. [6] studied die conductivity of prepared polyaniline and the influence of water on conductivity measurements. 

Thiazetidines and their Derivatives.—Carboxamides with an acidic cr-hydrogen react with thionyl chloride in the presence of pyridine to give l,2-thiazetidin-3-one 1-oxides (134). ° A-Phenyl-l,2-thiazetidin-3-one 1-oxide, prepared from keten and A-sulphinylaniline, is opened by anilines to give (135). Thiofluorenone reacts with (136) to give, amongst other things, a small yield of (137) this is oxidized to its sulphonamide by MCPBA. ... 

Crystalline powder, m.p. 174-179 C. Prepared by treatment of thiocarbanilide with sulphur, or by heating aniline, carbon disulphide and nitrobenzene. It is an important rubber accelerator, and on oxidation gives dibenzthiazyl disulphide, also a rubber accelerator. 

Prepare a mixture of 30 ml, of aniline, 8 g. of o-chloro-benzoic acid, 8 g. of anhydrous potassium carbonate and 0 4 g. of copper oxide in a 500 ml. round-bottomed flask fitted with an air-condenser, and then boil the mixture under reflux for 1 5 hours the mixture tends to foam during the earlier part of the heating owing to the evolution of carbon dioxide, and hence the large flask is used. When the heating has been completed, fit the flask with a steam-distillation head, and stcam-distil the crude product until all the excess of aniline has been removed. The residual solution now contains the potassium. V-phenylanthrani-late add ca. 2 g. of animal charcoal to this solution, boil for about 5 minutes, and filter hot. Add dilute hydrochloric acid (1 1 by volume) to the filtrate until no further precipitation occurs, and then cool in ice-water with stirring. Filter otT the. V-phcnylanthranilic acid at the pump, wash with water, drain and dry. Yield, 9-9 5 g. I he acid may be recrystallised from aqueous ethanol, or methylated spirit, with addition of charcoal if necessary, and is obtained as colourless crystals, m.p. 185-186°. 

Mono-substitution products of primary amines cannot easUy be prepared by direct action of the appropriate reagent for example, bromination of aniline yields largely the 2 4 6-tribomo derivative and nitration results in much oxidation. If, however, the amino group is protected as in acetanilide, smooth substitution occurs. Thus with bromine, />-bromoacetanilide is the main product the small quantity of the ortlio isomeride simultaneously formed can be easily eliminated by crystallisation. Hydrolysis of p-bromoacetanilide gives/ -bromoaniline ... 

Benzoquinone ( quinone ) is obtained as the end product of the oxidation of aniline by acid dichromate solution. Industrially, the crude product is reduced with sulphur dioxide to hydroquinone, and the latter is oxidised either with dichromate mixture or in very dilute sulphuric acid solution with sodium chlorate in the presence of a little vanadium pentoxide as catalyst. For the preparation in the laboratory, it is best to oxidise the inexpensive hydroquinone with chromic acid or with sodium chlorate in the presence of vanadium pent-oxide. Naphthalene may be converted into 1 4-naphthoquinone by oxidation with chromic acid. 

N-Phenylanthranilic acid may be prepared by the action of aniline upon c-chlorobenzoic acid in the presence of anhydrous potassium carbonate and a little copper oxide ... 

Polyaniline (PANI) can be formed by electrochemical oxidation of aniline in aqueous acid, or by polymerization of aniline using an aqueous solution of ammonium thiosulfate and hydrochloric acid. This polymer is finding increasing use as a "transparent electrode" in semiconducting devices. To improve processibiHty, a large number of substituted polyanilines have been prepared. The sulfonated form of PANI is water soluble, and can be prepared by treatment of PANI with fuming sulfuric acid (31). A variety of other soluble substituted AJ-alkylsulfonic acid self-doped derivatives have been synthesized that possess moderate conductivity and allow facile preparation of spincoated thin films (32). 

Maleic anhydride and the two diacid isomers were first prepared in the 1830s (1) but commercial manufacture did not begin until a century later. In 1933 the National Aniline and Chemical Co., Inc., installed a process for maleic anhydride based on benzene oxidation using a vanadium oxide catalyst (2). Maleic acid was available commercially ia 1928 and fumaric acid production began in 1932 by acid-catalyzed isomerization of maleic acid. 

A AlI lation. A number of methods are available for preparation of A/-alkyl and A[,A/-dialkyl derivatives of aromatic amines. Passing a mixture of aniline and methanol over a copper—zinc oxide catalyst at 250°C and 101 kPa (1 atm) reportedly gives /V-methylaniline [100-61-8] in 96% yield (1). Heating aniline with methanol under pressure or with excess methanol produces /V, /V-dimethylaniline [121 -69-7] (2,3). 

In the Bnchamp process, nitro compounds are reduced to amines in the presence of iron and an acid. This is the oldest commercial process for preparing amines, but in more recent years it has been largely replaced by catalytic hydrogenation. Nevertheless, the Bnchamp reduction is still used in the dyestuff industry for the production of small volume amines and for the manufacture of iron oxide pigments aniline is produced as a by-product. The Bnchamp reduction is generally mn as a batch process however, it can also be mn as a continuous (48) or semicontinuous process (49). 

To minimize the formation of fuhninating silver, these complexes should not be prepared from strongly basic suspensions of silver oxide. Highly explosive fuhninating silver, beheved to consist of either silver nitride or silver imide, may detonate spontaneously when silver oxide is heated with ammonia or when alkaline solutions of a silver—amine complex are stored. Addition of appropriate amounts of HCl to a solution of fuhninating silver renders it harmless. Stable silver complexes are also formed from many ahphatic and aromatic amines, eg, ethylamine, aniline, and pyridine. 

The central carbon atom is derived from an aromatic aldehyde or a substance capable of generating an aldehyde during the course of the condensation. Malachite green is prepared by heating benzaldehyde under reflux with a slight excess of dimethyl aniline in aqueous acid (Fig. 2). The reaction mass is made alkaline and the excess dimethylaniline is removed by steam distillation. The resulting leuco base is oxidized with freshly prepared lead dioxide to the carbinol base, and the lead is removed by precipitation as the sulfate. Subsequent treatment of the carbinol base with acid produces the dye, which can be isolated as the chloride, the oxalate [2437-29-8] or the zinc chloride double salt [79118-82-4]. 

Minor uses of vanadium chemicals are preparation of vanadium metal from refined pentoxide or vanadium tetrachloride Hquid-phase organic oxidation reactions, eg, production of aniline black dyes for textile use and printing inks color modifiers in mercury-vapor lamps vanadyl fatty acids as driers in paints and varnish and ammonium or sodium vanadates as corrosion inhibitors in flue-gas scmbbers. 

Oxidative Couplings of Heterocyclic Hydrazones. This method has opened the way to the preparation of azo derivatives of diazo compounds unobtainable by other means, ie, heterocycHc compounds ia which the diazotizable amino group is conjugated with the heterocycHc nitrogen atom as ia 2- and 4-amiQopyridine, compounds which do not normally yield stable diazonium salts (38). The reaction occurs as illustrated by equation 7 for the iateraction of (A/-methylcarbostyryl)hydrazone [28219-37-6] and dimethyl aniline the overall process is oxidation. 

Phenazine mono-N-oxides have also been prepared from nitrobenzene derivatives. Condensation of nitrobenzene with aniline using dry NaOH at 120-130 °C results in modest yields of phenazine 5-oxide, although the precise mechanism of this reaction is not well understood (57HC(ll)l) with unsymmetrical substrates it is not possible to predict which of the isomeric fV-oxides will be produced. Nitrosobenzene derivatives also function as a source of phenazine mono-fV-oxides thus, if 4-chloronitrosobenzene is treated with sulfuric acid in acetic acid at 20 °C the fV-oxide is formed (Scheme 21). 

---