Aromatic ethers acylation anhydrides

Whilst bismuth (III) chloride is an efficient catalyst for the aromatic ether acylation by acid chlorides or anhydrides, it is not strong enough to carry out the acylation of non activated aromatics. However, the potential of using a wide range of Bi (III) salts as catalysts (ref. 41), in particular the oxide, the oxychloride and the carboxylates, all non hygroscopic compounds, offers advantages, and is indicative of the great versatility of Bi (III) derivatives. Moreover, the Bi salts obtained after hydrolytic workup are directly reusable. 

H-Bond Acceptor (HBA) Acyl chlorides Acyl fluorides Hetero nitrogen aromatics Hetero oj gen aromatics Tertiary amides Tertiary amines Other nitriles Other nitros Isocyanates Peroxides Aldehydes Anhydrides Cyclo ketones Ahphatic ketones Esters Ethers Aromatic esters Aromatic nitriles Aromatic ethers Sulfones Sulfolanes... 

The lower members of the homologous series of 1. Alcohols 2. Aldehydes 3. Ketones 4. Acids 5. Esters 6. Phenols 7. Anhydrides 8. Amines 9. Nitriles 10. Polyhydroxy phenols 1. Polybasic acids and hydro-oxy acids. 2. Glycols, poly-hydric alcohols, polyhydroxy aldehydes and ketones (sugars) 3. Some amides, ammo acids, di-and polyamino compounds, amino alcohols 4. Sulphonic acids 5. Sulphinic acids 6. Salts 1. Acids 2. Phenols 3. Imides 4. Some primary and secondary nitro compounds oximes 5. Mercaptans and thiophenols 6. Sulphonic acids, sulphinic acids, sulphuric acids, and sul-phonamides 7. Some diketones and (3-keto esters 1. Primary amines 2. Secondary aliphatic and aryl-alkyl amines 3. Aliphatic and some aryl-alkyl tertiary amines 4. Hydrazines 1. Unsaturated hydrocarbons 2. Some poly-alkylated aromatic hydrocarbons 3. Alcohols 4. Aldehydes 5. Ketones 6. Esters 7. Anhydrides 8. Ethers and acetals 9. Lactones 10. Acyl halides 1. Saturated aliphatic hydrocarbons Cyclic paraffin hydrocarbons 3. Aromatic hydrocarbons 4. Halogen derivatives of 1, 2 and 3 5. Diaryl ethers 1. Nitro compounds (tertiary) 2. Amides and derivatives of aldehydes and ketones 3. Nitriles 4. Negatively substituted amines 5. Nitroso, azo, hy-drazo, and other intermediate reduction products of nitro com-pounds 6. Sulphones, sul-phonamides of secondary amines, sulphides, sulphates and other Sulphur compounds... 

The acylation of aromatic ethers by acyl chlorides is highly regioselective in the presence of 10 mol% Sml3.53 Some aromatic compounds are efficiently acylated by acid anhydrides catalysed by niobium pentachloride with silver perchlorate.54 Arenes of a range of reactivity are acylated by acetic anhydride in a fluorous biphasic system catalysed by Hfps SCLCgFn L (1 mol%)55 The catalyst is easily recoverable and can usually be used again without decrease in activity. 

Ranu, B. C., Ghosh, K., Jana, U. Simple and Improved Procedure for Regioselective Acylation of Aromatic Ethers with Carboxylic Acids on the Solid Surface of Alumina in the Presence of Trifluoroacetic Anhydride. J. Org. Chem. 1996, 61, 9546-9547. 

Bismuth(lll) salts such as BiCls, BiBrj, Bi(OCOR)3, and Bi (OTf), [166] have been widely used as Lewis acid catalysts to mediate C-C bond formation. Bi (OTf) 3, Bi2O3, and BiCl, catalyze Friedel-Crafts acylation with acyl chlorides or acid anhydrides [167]. Both electron-rich and electron-deficient arenes are acylated in high yields under catalysis by Bi(OTf)3 (Scheme 14.82). Under microwave irradiation the catalytic activity of BiX3 (X = C1, OTf) in the acylation of aromatic ethers is enhanced [168]. The N-acyl group of p-substituted anilides migrates to the ortho position of the aromatic nucleus under BiCls catalysis [169]. Treatment of 2,3-dichloroanisole with the ethyl glyoxylate polymer in the presence of a catalytic amount of Bi(OTf)3 affords an a,a-diarylacetic acid ester quantitatively (Scheme 14.83) [170]. 

Acylation of Aromatic Ethers. A simple and improved procedure for regioselec-tive acylation of aromatic ethers with carboxylic acids on alumina in the presence of trifluoroacetic anhydride has been described by Ranu et al. [Eq. (21)]... 

Table 3.5 Acylation of aromatic ethers with anhydrides in the presence of titanium(IV) monochlorotriflate-triflic acid mixture...

Table 3.16 Aluminum-hydrogensulfate-promoted acylation of aromatic ethers with acetic and propionic anhydrides...

A high para-selectivity is also observed in the acylation of aromatic ethers with propanoic anhydride, carried out with the same catalyst. The 4-methoxypropiophenone is isolated with 99% selectivity after a 2 h reaction at 150°C. 

The more reactive aromatic ethers are acylated with anhydrides over clayzic or clayfen. 2-MN selectively gives 1-acetyl derivative 28 in 71% yield at 80°C in nitrobenzene, whereas at 140°C the yield increases until 82% but a drop in selectivity is observed, small amounts of thermodynamically favored 6-acylated product 29 ( 7%) accompanied by the 8-acylated product 30 ( 2%) being obtained via protiodeacylation (Scheme 4.20). 

Acylation of aromatic ethers with acid anhydrides in the presence of cation-exchanged clays. Appl. Catal. A Gen. 171 155-160. 

Transacylation. Silyl esters behave as acyl donors to amines in the presence of the dual-catalyst system and the aromatic anhydride. Silyl ethers instead of the alcohols can be converted to esters under these conditions, and for lactonization, a similar system (AgC104 instead of AgOTf) is effective. 

The regioselective acylation of aromatic ethers with carboxylic acids (aromatic ether/carboxylic acid ratio =1) can be pafonned with an equimolecular mixture of trifluoroacetic anhydride adsorbed on the surface of alumina without any solvent [77]. The process can be applied, with nearly quantitative yields, to anisole and the three isomeric dimethoxybenzenes by using carboxylic acids. The authors outline that in the case of anisole, the acylation selectively occurs at the para position to the methoxy group. The reaction requires a large amount of alumina and trifluoroacetic anhydride, and consequently, it can only be appUed at the laboratory scale. The intervention of a mixed carboxyhc acidArifluoroacetic acid mixed anhydride intermediate is presumed. 

Conversion of MEM ethers to esters. 2-Methoxyethoxymethyl (MEM) ethers are converted into carboxylic esters by reaction with an anhydride in the presence of FeCl3 (0.4 equiv.) (equation I). Selective cleavage is possible in the presence of a benzyl ether but not in the presence of a f-butyl ether. Aromatic rings, if present, can undergo acylation. 

Acylation The reagent catalyses the arylation of activated aromatic compounds by reaction with carboxylic acids. Thus methyl phenyl ether can be acylated with acetic acid in presence of trifluoroacetic anhydride in good yields. 

Di-(l-naphthylmethyl)sulphone forms an excimer but does not react to give an intramolecular cycloaddition product like the corresponding ether but rather fragments to give sulphur dioxide and (l-naphthyl)methyl radicals (Amiri and Mellor, 1978). I-Naphthylacetyl chloride has a very low quantum yield of fluorescence and this is possibly due to exciplex formation between the acyl group and the naphthalene nucleus (Tamaki, 1979). Irradiation leads to decarbonylation. It is known that acyl chlorides quench the fluorescence of aromatic hydrocarbons and that this process leads to acylation of the aromatic hydrocarbon (Tamaki, 1978a). The decarboxylation of anhydrides of phenylacetic acids [171] has been interpreted as shown in (53), involving... 

Acylals are formed by the addition of simple anhydrides to aliphatic or aromatic aldehydes. The reaction occurs at 0-5° in the presence of boron trifluoride etherate. Yields are in the range of 65% to 81%. ... 

In the laboratory of K. Krohn, the total synthesis of phytoalexine (+)-lacinilene C methyl ether was completed. In order to prepare the core of the natural product, an intermolecular Friedel-Crafts acylation was carried out between succinic anhydride and an aromatic substrate, followed by an intramolecular acylation. After the first acylation, the 4-keto arylbutyric acid was reduced under Clemmensen reduction conditions (to activate the aromatic ring for the intramolecular acylation). 

Crafts process is to generate carbonium ions from the alkyl or acyl halides. It would be expected, then, that a number of other combinations of starting materials and reagents which lead to carbonium ions should be capable of effecting acylation or alkylation. Indeed we find that olefins (p. 35), alcohols (p. 36), ethers (p. 36), and esters (p. 37) can be used as starting materials for aromatic alkylation reactions in the presence of such catalysts as boron trifluoride, sulfuric acid, or anhydrous hydrogen fluoride.69 Acylations can be carried out with acids (p. 37),64 acid halides (p. 230), and acid anhydrides (p. 37). The Fries reaction65 (in which phenolic esters are converted to hydroxy aromatic ketones by means of aluminum chloride) appears to be an example of a typical acylation reaction in which the ester itself acts as the source of an acyl carbonium ion ... 

---