Ammonium Utilization

Jiranek, V, Langiidge, P. Henschke, P.A. (1995). Amino acid and ammonium utilization by Saccharomyces cerevisiae wine yeasts from a chemically defined medium. Am. J. Enol. Vitic., 46, 75-83. 

Kirchman, D. L., Ked, R. G., and Wheeler, P. A. (1989). The effect of amino acids on ammonium utilization and regeneration by heterotrophic bacteria in the subarctic Pacific. Deep Sea Research 36, 1763-1776. 

Tupas, L., and Koike, I. (1990). Amino acid and ammonium utilization by heterotrophic marine bacteria grown in enriched seawater. Hmnol. Oceanogr. 35(5), 1145—1155. 

The stream from the reactor consisting of a mixture of urea, unconverted ammonium carbamate, excess water, and NH, is fed into the top of the stripper. The ACES stripper utilizes a ferrite—austenite stainless steel, as do the carbamate condensers. The reactor and scmbber are constmcted with 316 L urea-grade stainless steel. 

The ratio of reactants had to be controlled very closely to suppress these impurities. Recovery of the acrylamide product from the acid process was the most expensive and difficult part of the process. Large scale production depended on two different methods. If soHd crystalline monomer was desired, the acrylamide sulfate was neutralized with ammonia to yield ammonium sulfate. The acrylamide crystallized on cooling, leaving ammonium sulfate, which had to be disposed of in some way. The second method of purification involved ion exclusion (68), which utilized a sulfonic acid ion-exchange resin and produced a dilute solution of acrylamide in water. A dilute sulfuric acid waste stream was again produced, and, in either case, the waste stream represented a... 

Therefore the extent of extraction or back-extraction is governed by the concentration of X ia the aqueous phase, the distribution coefficients, and selectivities depending on the anion. In nitrate solutions, the distribution coefficient decreases as the atomic number of the REE increases, whereas ia thiocyanate solutions, the distribution coefficient roughly increases as the atomic number of the REE increases. The position of yttrium in the lanthanide series is not the same in nitrate and thiocyanate solutions, and this phenomenon has been used for high purity yttrium manufacture in the past. A combination of extraction by carboxyUc acids then by ammonium salts is also utilized for production of high purity yttrium. 

Pipeline systems for transporting anhydrous ammonia that are urea and ammonium nitrate (UAN) and LNG compatible, exist in Europe, Mexico, and the Soviet Union. Export-oriented ammonia producing countries utilize huge ocean-going tankers that contain up to 50,000 t for distribution of ammonia. Co-shipment in refrigerated LNG tankers is usuaky done. 

QunternuryAmmonium Esters. The most rapidly growing category of quaternary ammonium salts ate the ester quaternaries which utilize... 

Direct Chlorination of Ethylene. Direct chlorination of ethylene is generally conducted in Hquid EDC in a bubble column reactor. Ethylene and chlorine dissolve in the Hquid phase and combine in a homogeneous catalytic reaction to form EDC. Under typical process conditions, the reaction rate is controlled by mass transfer, with absorption of ethylene as the limiting factor (77). Ferric chloride is a highly selective and efficient catalyst for this reaction, and is widely used commercially (78). Ferric chloride and sodium chloride [7647-14-5] mixtures have also been utilized for the catalyst (79), as have tetrachloroferrate compounds, eg, ammonium tetrachloroferrate [24411-12-9] NH FeCl (80). The reaction most likely proceeds through an electrophilic addition mechanism, in which the catalyst first polarizes chlorine, as shown in equation 5. The polarized chlorine molecule then acts as an electrophilic reagent to attack the double bond of ethylene, thereby faciHtating chlorine addition (eq. 6) ... 

The most successful of these products contain high ratios of VP to DMAEMA and are partially quatemized with diethyl sulfate (Polyquaternium 11) (142—144). They afford very hard, clear, lustrous, nonflaking films on the hair that are easily removed by shampooing. More recendy, copolymers with methyl vinyl imidazoliiim chloride (Polyquaternium 16) (145) or MAPTAC (methacrylamidopropyltrimethyl ammonium chloride) (Polyquaternium 28) have been introduced. Replacement of the ester group in DMAEMA with an amide analog as in Polyquaternium 28 results in a resin resistant to alkaline hydrolysis and hence greater utility in alkaline permanent-wave and bleach formulations (see Quaternary ammonium compounds). 

Chisso-Asahi Fertilizer Company, Ltd. This company utilizes thermoplastic resins, such as polyolefins, poly(vinyhdene chloride), and copolymers, as their coating materials. The coatings are dissolved in fast-drying chlorinated hydrocarbon solvents and are appHed to a variety of substrates including urea, diammonium phosphate [7783-28-0] potassium sulfate [7778-80-3], potassium chloride [7447-40-7], and ammonium nitrate/potassium sulfate-based N—P—K fertilizers. 

An important publication by Kost et al. (63JGU525) on thin-layer chromatography (TLC) of pyrazoles contains a large collection of Rf values for 1 1 mixtures of petroleum ether-chloroform or benzene-chloroform as eluents and alumina as stationary phase. 1,3- and 1,5-disubstituted pyrazoles can be separated and identified by TLC (Rf l,3>i y 1,5). For another publication by the same authors on the chromatographic separation of the aminopyrazoles, see (63JGU2519). A-Unsubstituted pyrazoles move with difficulty and it is necessary to add acetone or methanol to the eluent mixture. Other convenient conditions for AH pyrazoles utilize silica gel and ethyl acetate saturated with water (a pentacyanoamine ferroate ammonium disodium salt solution can be used to visualize the pyrazoles). 

Low surface energy substrates, such as polyethylene or polypropylene, are generally difficult to bond with adhesives. However, cyanoacrylate-based adhesives can be effectively utilized to bond polyolefins with the use of the proper primer/activa-tor on the surface. Primer materials include tertiary aliphatic and aromatic amines, trialkyl ammonium carboxylate salts, tetraalkyl ammonium salts, phosphines, and organometallic compounds, which are initiators for alkyl cyanoacrylate polymerization [33-36]. The primer is applied as a dilute solution to the polyolefin surface, solvent is allowed to evaporate, and the specimens are assembled with a small amount of the adhesive. With the use of primers, adhesive strength can be so strong that substrate failure occurs during the course of the shear tests, as shown in Fig. 11. 

As in the previous categories in this section, there are numerous compounds which have been prepared based on a sugar subunit. Examples may be found in Refs. 7,35,42-45, 57, 82-85, 117—121,175,176,193 and 208. Much of the work in these references has been reported by Stoddart and his coworkers, who have pioneered this field. As with the compounds prepared by Cram, the goal was to prepare a chiral receptor for ammonium ions which could be utilized in enzyme model studies. 

Although the clam structures are of interest as ammonium ion binders, they are by no means the only azacrown compounds of interest in this application. Sutherland and coworkers have examined a number of azacrowns as primary ammonium ion bind-ers - . In addition, Metcalfe and Stoddart have utilized bis-azacrowns to bind secondary ammonium cations. 

---