Alkene 2-amino alcohol

As described in Section 2.3.2, vinylaziridines are versatile intermediates for the stereoselective synthesis of (E)-alkene dipeptide isosteres. One of the simplest methods for the synthesis of alkene isosteres such as 242 and 243 via aziridine derivatives of type 240 and 241 (Scheme 2.59) involves the use of chiral anti- and syn-amino alcohols 238 and 239, synthesizable in turn from various chiral amino aldehydes 237. However, when a chiral N-protected amino aldehyde derived from a natural ot-amino acid is treated with an organometallic reagent such as vinylmag-nesium bromide, a mixture of anti- and syn-amino alcohols 238 and 239 is always obtained. Highly stereoselective syntheses of either anti- or syn-amino alcohols 238 or 239, and hence 2,3-trans- or 2,3-as-3-alkyl-2-vinylaziridines 240 or 241, from readily available amino aldehydes 237 had thus hitherto been difficult. Ibuka and coworkers overcame this difficulty by developing an extremely useful epimerization of vinylaziridines. Palladium(0)-catalyzed reactions of 2,3-trons-2-vinylaziri-dines 240 afforded the thermodynamically more stable 2,3-cis isomers 241 predominantly over 240 (241 240 >94 6) through 7i-allylpalladium intermediates, in accordance with ab initio calculations [29]. This epimerization allowed a highly stereoselective synthesis of (E) -alkene dipeptide isosteres 243 with the desired L,L-... 

P-Amino alcohols can be prepared by treatment of an alkene with a reagent prepared from HgO and HBF4 along with aniline to give an ami nomercurial... 

Intramolecular nitrone cycloadditions often require higher temperatures as nitrones react more sluggishly with alkenes than do nitrile oxides and the products contain a substituent on nitrogen which may not be desirable. Conspicuously absent among various nitrones employed earlier have been NH nitrones, which are tautomers of the more stable oximes. However, Grigg et al. [58 a] and Padwa and Norman [58b] have demonstrated that under certain conditions oximes can undergo addition to electron deficient olefins as Michael acceptors, followed by cycloadditions to multiple bonds. We found that intramolecular oxime-olefin cycloaddition (lOOC) can occur thermally via an H-nitrone and lead to stereospecific introduction of two or more stereocenters. This is an excellent procedure for the stereoselective introduction of amino alcohol functionality via N-0 bond cleavage. 

A typical second step after the insertion of CO into aryl or alkenyl-Pd(II) compounds is the addition to alkenes [148]. However, allenes can also be used (as shown in the following examples) where a it-allyl-r 3-Pd-complex is formed as an intermediate which undergoes a nucleophilic substitution. Thus, Alper and coworkers [148], as well as Grigg and coworkers [149], described a Pd-catalyzed transformation of o-iodophenols and o-iodoanilines with allenes in the presence of CO. Reaction of 6/1-310 or 6/1-311 with 6/1-312 in the presence of Pd° under a CO atmosphere (1 atm) led to the chromanones 6/1-314 and quinolones 6/1-315, respectively, via the Jt-allyl-r 3-Pd-complex 6/1-313 (Scheme 6/1.82). The enones obtained can be transformed by a Michael addition with amines, followed by reduction to give y-amino alcohols. Quinolones and chromanones are of interest due to their pronounced biological activity as antibacterials [150], antifungals [151] and neurotrophic factors [152]. 

Primary nitro compounds are good precursors for preparing nitriles and nitrile oxides (Eq. 6.31). The conversion of nitro compounds into nitrile oxides affords an important tool for the synthesis of complex natural products. Nitrile oxides are reactive 1,3-dipoles that form isoxazolines or isoxazoles by the reaction with alkenes or alky nes, respectively. The products are also important precursors for various substrates such as P-amino alcohols, P-hydroxy ketones, P-hydroxy nitriles, and P-hydroxy acids (Scheme 6.3). Many good reviews concerning nitrile oxides in organic synthesis exist some of them are listed here.50-56 Applications of organic synthesis using nitrile oxides are discussed in Section 8.2.2. 

The mechanism of 1,3-dipolar cycloaddition can be found in Ref. 63 and the references within. The reaction of nitrone with 1,2-disubstituted alkenes creates three contiguous asymmetric centers, in which the geometric relationship of the substituents of alkenes is retained. The synthetic utility of nitrone adducts is mainly due to their conversion into various important compounds. For instance, P-amino alcohols can be obtained from isoxazolidines by reduction with H2-Pd or Raney Ni with retention of configuration at the chiral center (Eq. 8.44). 

Thus, isoxazolines are converted into y-amino alcohols and (3-hydroxy ketones stereoselec-tively. However, the intermolecular cycloaddition involving 1,2-unsymmetrically substituted alkenes such as trans-cinnamyl alcohol proceeds nonregioselectively to give a mixture of the two regioisomers (Eq. 8.63).98... 

Dipolar addition is closely related to the Diels-Alder reaction, but allows the formation of five-membered adducts, including cyclopentane derivatives. Like Diels-Alder reactions, 1,3-dipolar cycloaddition involves [4+2] concerted reaction of a 1,3-dipolar species (the An component and a dipolar In component). Very often, condensation of chiral acrylates with nitrile oxides or nitrones gives only modest diastereoselectivity.82 1,3-Dipolar cycloaddition between nitrones and alkenes is most useful and convenient for the preparation of iso-xazolidine derivatives, which can then be readily converted to 1,3-amino alcohol equivalents under mild conditions.83 The low selectivity of the 1,3-dipolar reaction can be overcome to some extent by introducing a chiral auxiliary to the substrate. As shown in Scheme 5-51, the reaction of 169 with acryloyl chloride connects the chiral sultam to the acrylic acid substrate, and subsequent cycloaddition yields product 170 with a diastereoselectivity of 90 10.84... 

Af-Acyliminium ions are known to serve as electron-deficient 4n components and undergo [4+2] cycloaddition with alkenes and alkynes.15 The reaction has been utilized as a useftil method for the construction of heterocycles and acyclic amino alcohols. The reaction can be explained in terms of an inverse electron demand Diels-Alder type process that involves an electron-deficient hetero-diene with an electron-rich dienophile. Af-Acyliminium ions generated by the cation pool method were also found to undergo [4+2] cycloaddition reaction to give adduct 7 as shown in Scheme 7.16 The reaction with an aliphatic olefin seems to proceed by a concerted mechanism, whereas the reaction with styrene derivatives seems to proceed by a stepwise mechanism. In the latter case, significant amounts of polymeric products were obtained as byproducts. The formation of polymeric byproducts can be suppressed by micromixing. 

Over the last years, one of the most studied DCR has been the asymmetric version of the cycloaddition of nitrones with alkenes. This reaction leads to the construction of up to three contiguous asymmetric carbon centers (Scheme 4). The resulting five-membered isoxazolidine derivatives may be converted into amino alcohols, alkaloids, or p-lactams. Several chiral metal complexes have been used as catalysts for this process [13-15, 18-22]. However, the employment of iridium derivatives is very scarce. 

This chapter deals mainly with the 1,3-dipolar cycloaddition reactions of three 1,3-dipoles azomethine ylides, nitrile oxides, and nitrones. These three have been relatively well investigated, and examples of external reagent-mediated stereocontrolled cycloadditions of other 1,3-dipoles are quite limited. Both nitrile oxides and nitrones are 1,3-dipoles whose cycloaddition reactions with alkene dipolarophiles produce 2-isoxazolines and isoxazolidines, their dihydro derivatives. These two heterocycles have long been used as intermediates in a variety of synthetic applications because their rich functionality. When subjected to reductive cleavage of the N—O bonds of these heterocycles, for example, important building blocks such as p-hydroxy ketones (aldols), a,p-unsaturated ketones, y-amino alcohols, and so on are produced (7-12). Stereocontrolled and/or enantiocontrolled cycloadditions of nitrones are the most widely developed (6,13). Examples of enantioselective Lewis acid catalyzed 1,3-dipolar cycloadditions are summarized by J0rgensen in Chapter 12 of this book, and will not be discussed further here. 

Oxyaminatkm.1 The ratio of amino alcohol to diol formed by reaction of alkenes with the reagent is considerably improved by the presence of tertiary alkyl bridgehead amines. Of these ligands, quinuclidine (I, 976 4, 417) is the most efficient. In this case DME is used in place of pyridine as solvent. 

Dipolar cycloaddition reactions between nitrile oxides and alkenes produce 2-isoxazolines. Through reductive cleavage of the N—O bond of the 2-isoxazolines, the resulting heterocycles can be readily transformed into a variety of important synthetic intermediates such as p-hydroxy ketones (aldols), p-hydroxy esters, cc,p-unsaturated carbonyl compounds, y-amino alcohols, imino ketones and so forth (7-12). 

From oxidative cleavage of 1,2-diols and 1,2-amino alcohols Dibutyltin oxide, 95 By reaction of alkyl halides with sulfur-stabilized carbanions Methylthiomethyl p-tolyl sulfone, 192 From reduction of carboxylic acids Vilsmeier reagent, 341 From terminal alkenes by addition reactions... 

The same researchers found that imino derivatives of Os04 react with alkenes to produce cis-jS-amino alcohols (equation 124).346,347 This oxyamination reaction can be made catalytic in the presence of chloramine salts, e.g. ArS02NClNa or ROCONClAg.348,349... 

A vincinal amino alcohol grouping is present in a fair number of natural products which possess useful biological activity, such as antibiotics122. Such a functionality has been produced from alkenes via osmium-mediated aminohydroxylation (equation 22)123. The reaction proceeds in 40-97% yield and is enantioselective if chiral osmium-Cinchona alkaloid complexes are used to mediate the reaction. 

Asymmetric cyclopropanation. Three laboratories have reported that copper complexes of chiral bis(oxazolines) are effective catalysts for asymmetric cyclopropanation of alkenes with diazoacetates. Bis(oxazolines) such as 1 are readily available by condensation of a-amino alcohols with diethyl malonate followed by cyclization, effected with dichlorodimethyltin or thionyl chloride. Cyclopropanation of styrene with ethyl diazoacetate catalyzed by copper complexes of type 1 indicates... 

Chiral amino alcohols and diamines. The chiral vtc-diols available by catalytic asymmetric dihydroxylation of alkenes (14, 237-239) can be converted via a derived cyclic sulfite into chiral 1,2-amino alcohols and diamines as shown in equation I. The same transformations are useful in conversion of 1-alkyl- or arylethane-1,2-diols into the corresponding amino alcohols and diamines. 

A variation on the Sharpless dihydroxylation methodology allows for the preparation of amino alcohols. As the groups are introduced in a syn manner, this complements an epoxide opening or a similar reaction that uses substitution at one center (Chapter 22). Higher selectivity is observed when one of the alkene substituents is electron withdrawing, as in an ester group (Scheme 9.32).179-181... 

In combination with the range of standard transformations of alcohols, alkenes, and vinylsulfides, these silicon-tethered additions of functionalized radicals offer a versatile and stereoselective approach to amino alcohol synthesis. Whereas vinyl and 2-oxoethyl radicals have not yet been demonstrated as competent participants in the various intermolecular additions reported in the literature, the temporary tether approach allows such functionalized fragments to be installed in an efficient and stereoselective manner. Synthesis of the aminosugar daunosamine from achiral precursors shows how this concept, employing hydrazone radical acceptors, can be merged with asymmetric catalysis to achieve practical synthetic advances. 

---