Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Allylic substitution catalysts

The allyl-substituted cyclopentadiene 122 was prepared by the reaction of cyclopentadiene anion with allylic acetates[83], Allyl chloride reacts with carbon nucleophiles without Pd catalyst, but sometimes Pd catalyst accelerates the reaction of allylic chlorides and gives higher selectivity. As an example, allylation of the anion of 6,6-dimethylfulvene 123 with allyl chloride proceeded regioselectively at the methyl group, yielding 124[84]. The uncatalyzed reaction was not selective. [Pg.308]

Hie use of tlie cliiral catalyst 19b for asymmetric allylic substitution of allylic substrates bas been studied in some deta d fSdieme 8.18) and, under ji-selective reaction conditions, asymmetric induction was indeed obtained [28, 34]. [Pg.273]

Alkynes react with indium reagents such as (allyl)3ln2l3 to form dienes (allyl substituted alkenes from the alkyne). Allyltin reagents add to alkynes in a similar manner in the presence of ZrCU Alkylzinc reagents add to alkynes to give substituted alkenes in the presence of a palladium catalyst. ... [Pg.1026]

With the iron atom in its most negative oxidation state of —2 this complex possesses nucleophilic properties and thus can be used in nucleophilic substitution reactions. As the iron atom in this complex formally has ten valence electrons, it is isoelectronic with Pd(0), which is a well-known catalyst in allylic substitution reactions [49]. [Pg.196]

Abstract The use of A-heterocyclic carbene (NHC) complexes as homogeneous catalysts in addition reactions across carbon-carbon double and triple bonds and carbon-heteroatom double bonds is described. The discussion is focused on the description of the catalytic systems, their current mechanistic understanding and occasionally the relevant organometallic chemistry. The reaction types covered include hydrogenation, transfer hydrogenation, hydrosilylation, hydroboration and diboration, hydroamination, hydrothiolation, hydration, hydroarylation, allylic substitution, addition, chloroesterification and chloroacylation. [Pg.23]

Allylic substitutions catalysed by palladium NHC complexes have been studied and the activity and selectivity of the catalysts compared to analogous Pd phosphine complexes. A simple catalytic system involves the generation of a Pd(NHC) catalyst in situ in THF, from Pdj(dba)j, imidazolium salt and Cs COj. This system showed very good activities for the substitution of the allylic acetates by the soft nucleophilic sodium dimethyl malonate (2.5 mol% Pdj(dba)3, 5 mol% IPr HCl, 0.1 equiv. C (CO ), THF, 50°C) (Scheme 2.22). Generation of the malonate nncleophile can also be carried out in situ from the dimethyhnalonate pro-nucleo-phile, in which case excess (2.1 equivalents) of Cs COj was used. The nature of the catalytic species, especially the number of IPr ligands on the metal is not clear. [Pg.49]

Since Pd complexes are well-known catalysts for enantioselective allylic substitution reactions, here the catalytic behaviour of palladium NPs for this reaction is examined (Scheme 1). One example involving a chiral phosphite with a carbohydrate backbone, able to coordinate firmly at the surface of NPs together with oxygen atoms capable to interact weakly with this surface, is presented. In particular. [Pg.431]

The Pauson-Khand reaction can be facilitated by preparing the necessary ene-yne in situ by an allylic substitution of an alkyne with allylic acetate using a Pd°- and Rh-catalyst The yield of the cydization product 6/4-24 ranges from 0 % with X = O (6/4-24a) to 92% with X=NTs, as well as X = C(C02Et)2 (6/4-24c) (Scheme 6/4.8) [283],... [Pg.460]

Asymmetric synthesis of tricyclic nitro ergoline synthon (up to 70% ee) is accomplished by intramolecular cyclization of nitro compound Pd(0)-catalyzed complexes with classical C2 symmetry diphosphanes.94 Palladium complexes of 4,5-dihydrooxazoles are better chiral ligands to promote asymmetric allylic alkylation than classical catalysts. For example, allylic substitution with nitromethane gives enantioselectivity exceeding 99% ee (Eq. 5.62).95 Phosphi-noxazolines can induce very high enatioselectivity in other transition metal-catalyzed reactions.96 Diastereo- and enantioselective allylation of substituted nitroalkanes has also been reported.9513... [Pg.146]

The supported aqueous phase methodology was applied to the system Pd(OAc)2/5 TPPTS, a catalytic precursor for the Trost-Tsuji reaction. The characterization of the solid by 31P MAS NMR confirms the presence of Pd°(TPPTS)3 as the main surface species. The catalytic properties of the solid were tested for the allylic substitution of E-cinnamylethylcarbonate by different nucleophiles such as ethyl acetoacetate, dimethyl malonate, morpholine, phenol, and 2-mercapto-pyridine. The absence of palladium leaching was demonstrated, and having solved the problem of water leaching from the solid to the organic phase, the SAP-Pd catalyst was successfully recycled several times without loss in its activity. It was used in a continuous flow experiment which... [Pg.465]

The palladium-catalyzed asymmetric allylic substitution using seven different phosphano-oxazoline ligands at various ligand-to-metal ratios was also studied.112 An aluminum block containing 27 wells was placed in a dry box in which the reactions were carried out in parallel. Analyses were performed by conventional chiral GC equipped with an autosampler. Such a setup allowed about 33 catalyst evaluations per day. Apparently, only a few dozen were carried out in the study, resulting in the identification of a catalyst showing an ee-value of 74% in the reaction of 4-acyloxy-2-pentene with malonate.112 It is not clear whether further ligand diversification would lead to catalysts more selective than the record set in this case by the Trost-catalyst (92% ee).113... [Pg.538]

RhClCO(dppp) 2] for the sequential construction of an enyne precursor, starting from a malonic acid derivative and allylic acetate, which was converted in situ to the cycloaddition product with excellent yields. Obviously, the Pd complex catalyzes the allylic substitution reaction, while the rhodium catalyst is responsible for the PKR (Eq. 6). [Pg.178]

Initial studies on the application of these catalysts to allylic substitution reactions showed that the arenethiolate moiety functions as an excellent nontransferable group, and that the regioselectivity can be completely reversed by suitable changes in the reaction parameters [33]. If the reaction between geranyl acetate and n-BuM gl was carried out inTHFat—30°C with fast addition of the Grignard reagent to the reaction mixture, complete a selectivity was obtained. Raising the tempera-... [Pg.272]

A wide range of carbon, nitrogen, and oxygen nucleophiles react with allylic esters in the presence of iridium catalysts to form branched allylic substitution products. The bulk of the recent literature on iridium-catalyzed allylic substitution has focused on catalysts derived from [Ir(COD)Cl]2 and phosphoramidite ligands. These complexes catalyze the formation of enantiomerically enriched allylic amines, allylic ethers, and (3-branched y-8 unsaturated carbonyl compounds. The latest generation and most commonly used of these catalysts (Scheme 1) consists of a cyclometalated iridium-phosphoramidite core chelated by 1,5-cyclooctadiene. A fifth coordination site is occupied in catalyst precursors by an additional -phosphoramidite or ethylene. The phosphoramidite that is used to generate the metalacyclic core typically contains one BlNOLate and one bis-arylethylamino group on phosphorus. [Pg.170]

This chapter describes the development of iridium-catalyzed, enantioselective allylic substitution. It is organized to focus on how modifications to the catalyst, combined with mechanistic insights, have provided the foundation for a steady... [Pg.170]

After the initial demonstration of stoichiometric nucleophilic attack on 7i-allyl ligands, catalytic allylic substitution reactions were pursued. In 1970, groups from Union Carbide [3, 4], Shell Oil [5], and Toray Industries [6] published or patented examples of catalytic allylic substitution. All three groups reported allylic amination with palladium catalysts. The Toray Industries report also demonstrated the exchange of aryl ether and ester leaving groups, and the patent from Shell Oil includes catalysts based on rhodium and platinum. [Pg.172]

The first iridium catalysts for allylic substitution were published in 1997. Takeuchi showed that the combination of [fr(COD)Cl]2 and triphenylphosphite catalyzes the addition of malonate nucleophiles to the substituted terminus of t -allyliridium intermediates that are generated from allylic acetates. This selectivity for attack at the more substituted terminus gives rise to the branched allylic alkylation products (Fig. 4), rather than the linear products that had been formed by palladium-catalyzed allylic substitution reactions at that time [7]. The initial scope of iridium-catalyzed allylic substitution was also restricted to stabilized enolate nucleophiles, but it was quickly expanded to a wide range of other nucleophiles. [Pg.173]

Thus, a catalyst for allylic substitution that is highly active and selective for the formation of products from addition to the more substituted terminus from a variety nucleophiles and allylic esters was unknown. Iridium catalysts have now been developed that begin to fill this void. [Pg.174]

Addition to linear 1,1-disubstituted allylic acetates is slower than addition to monosubstituted allylic esters. Additions to allylic trifluoroacetates or phosphates are faster than additions to allylic carbonates or acetates, and reactions of branched allylic esters are faster than additions to linear allylic esters. Aryl-, vinyl, alkynyl, and alkyl-substituted allylic esters readily undergo allylic substitution. Amines and stabilized enolates both react with these electrophiles in the presence of the catalyst generated from an iridium precursor and triphenylphosphite. [Pg.176]

Catalysts lacking phosphorus ligands have also been used as catalysts for allylic substitutions. [lr(COD)Cl]2 itself, which contains a 7i-accepting diolefin ligand, catalyzes the alkylation of allylic acetates, but the formation of branched products was only favored when the substitution reaction was performed with branched allylic esters. Takemoto and coworkers later reported the etherification of branched allylic acetates and carbonates with oximes catalyzed by [lr(COD)Cl]2 without added ligand [47]. Finally, as discussed in Sect. 6, Carreira reported kinetic resolutions of branched allylic carbonates from reactions of phenol catalyzed by the combination of [lr(COE)2Cl]2 and a chiral diene ligand [48]. [Pg.176]


See other pages where Allylic substitution catalysts is mentioned: [Pg.174]    [Pg.174]    [Pg.330]    [Pg.95]    [Pg.143]    [Pg.248]    [Pg.10]    [Pg.20]    [Pg.24]    [Pg.1336]    [Pg.351]    [Pg.514]    [Pg.537]    [Pg.545]    [Pg.157]    [Pg.41]    [Pg.136]    [Pg.136]    [Pg.696]    [Pg.702]    [Pg.39]    [Pg.496]    [Pg.214]    [Pg.276]    [Pg.277]    [Pg.278]    [Pg.280]    [Pg.169]    [Pg.171]    [Pg.173]    [Pg.176]   
See also in sourсe #XX -- [ Pg.154 ]




SEARCH



Allylic substitution

Substituted catalysts

© 2024 chempedia.info