Allylic alcohols chiral hydroperoxides

Oxidation in the presence of chiral titanium tartrate (modified Sharpless method). Inspired by the Sharpless asymmetric epoxidation48 of allylic alcohols with hydroperoxides in the presence of chiral titanium complex [diethyl tartrate (DET) and Ti(0-i-Pr)4], Kagan and co-workers46 and Modena and co-workers47 developed almost at the same time two variations of this reaction leading to o.p. sulfoxides with high enantiomeric purity. 

Analogously, we have tried to use the titanium/tartrate-catalyzed asymmetric epoxidation for the kinetic resolution of the other component of the reaction, namely the hydroperoxide when it is chiral. If the molar ratio of allylic alcohol and hydroperoxide is 1 2 and the reaction is quenched after the consumption at half the amount of hydroperoxide, in the ideal case the homochiral epoxy alcohol, the homochiral hydroperoxide and the homochiral carbinol should be expected. 

Among the reactions catalyzed by titanium complexes, the asymmetric epoxidation of allylic alcohols developed by Sharpless and coworkers [752, 807-810] has found numerous synthetic applications. Epoxidation of allylic alcohols 3.16 by ferf-BuOOH under anhydrous conditions takes place with an excellent enantioselectivity (ee > 95%) when promoted by titanium complexes generated in situ from Ti(0/ -Pr)4 and a slight excess of diethyl or diisopropyl (R,R)- or (iS, 5)-tartrates 2.69. The chiral complex formed in this way can be used in stoichiometric or in catalytic amounts. For catalytic use, molecular sieves must be added. Because both (RJ )- and (5,5)-tartrates are available, it is posable to obtain either enantiomeric epoxide from a single allylic alcohol. Cumene hydroperoxide (PhCMe20OH) can also be used in place of ferf-BuOOH. This method has been applied to industrial synthesis of enantiomeric glycidols [811, 812]. 

The Sharpless epoxidation of allylic alcohols by hydroperoxides uses as mediator [45] or as catalyst [46] a chiral titanium complex obtained from the combination Ti(OPr )4/diethyl tartrate (DET) in 1 1 ratio. Kinetic resolution of P-hydroxysulfides was also observed, but without diastereoselectivity for the product P-hydroxysulfoxides [47]. We found that the Sharpless reagent deactivated by 1 equivalent of water allows the enantioselective oxidation of aryl methyl sulfides into sulfoxides to be performed with ee s up to 90% [4S-50]. The best reagent combination proved to be Ti(0Pr )4/DET/H20 = 1 2 1. Independently, Modena et al. obtained similar enantioselectivities with the combination Ti(OPr )4/DET in 1 4 ratio [51]. These two combinations are sometimes referred to as the Kagan reagent and the Modena reagent, respectively. They will be considered successively. 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

The Sharpless-Katsuki asymmetric epoxidation reaction (most commonly referred by the discovering scientists as the AE reaction) is an efficient and highly selective method for the preparation of a wide variety of chiral epoxy alcohols. The AE reaction is comprised of four key components the substrate allylic alcohol, the titanium isopropoxide precatalyst, the chiral ligand diethyl tartrate, and the terminal oxidant tert-butyl hydroperoxide. The reaction protocol is straightforward and does not require any special handling techniques. The only requirement is that the reacting olefin contains an allylic alcohol. 

In 1965, Denney et al. (98) reported the reaction of a number of alkenes with ferf-butyl hydroperoxide (TBHP) and cupric salts of chiral acids. The use of ethyl camphorate copper complex 144 in the allylic oxidation of cyclopentene provides, upon reduction of the camphorate ester, the allylic alcohol in low yield and low selectivity, Eq. 82. The initial publication only provided the observed rotation of cyclopentenol, but comparison to subsequent literature values (99) reveals that this reaction proceeds in 12% ee and 43% yield (based on the metal complex). 

Natural compounds are also applied as chiral ligands in enantioselective homogeneous metallo-catalysts. A classical example is the Sharpless epoxidation of primary allylic alcohols with tert-butyl hydroperoxide [37]. Here the diethyl ester of natural (R,R)-(+)-tartaric acid (a by-product of wine manufacture) is used as bi-dentate ligand of the Ti(iv) center. The enantiomeric excess is >90%. The addition of zeolite KA or NaA is essential [38], bringing about adsorption of traces of water and - by cation exchange - some ionization of the hydroperoxide. 

A more recent approach to the epoxidation of allylic alcohols makes use of a vanadium polyoxometallate, together with a sterically demanding chiral tartrate (or TADDOL) -derived hydroperoxide, to give a highly chemoselective, regiose-lective and enantioselective outcome (Figure 11.2). ... 

Although it was also Henbest who reported as early as 1965 the first asymmetric epoxidation by using a chiral peracid, without doubt, one of the methods of enantioselective synthesis most frequently used in the past few years has been the "asymmetric epoxidation" reported in 1980 by K.B. Sharpless [3] which meets almost all the requirements for being an "ideal" reaction. That is to say, complete stereofacial selectivities are achieved under catalytic conditions and working at the multigram scale. The method, which is summarised in Fig. 10.1, involves the titanium (IV)-catalysed epoxidation of allylic alcohols in the presence of tartaric esters as chiral ligands. The reagents for this asyimnetric epoxidation of primary allylic alcohols are L-(+)- or D-(-)-diethyl (DET) or diisopropyl (DIPT) tartrate,27 titanium tetraisopropoxide and water free solutions of fert-butyl hydroperoxide. The natural and unnatural diethyl tartrates, as well as titanium tetraisopropoxide are commercially available, and the required water-free solution of tert-bnty hydroperoxide is easily prepared from the commercially available isooctane solutions. 

Another route to a methyl-branched derivative makes use of reductive cleavage of spiro epoxides ( ). The realization of this process was tested in the monosaccharide series. Hittig olefination of was used to form the exocyclic methylene compound 48. This sugar contains an inherent allyl alcohol fragmenC the chiral C-4 alcohol function of which should be idealy suited to determine the chirality of the epoxide to be formed by the Sharpless method. With tert-butvl hydroperoxide, titanium tetraisopropoxide and (-)-tartrate (for a "like mode" process) no reaction occured. After a number of attempts, the Sharpless method was abandoned and extended back to the well-established m-chloroperoxybenzoic acid epoxida-tion. The (3 )-epoxide was obtained stereospecifically in excellent yield (83%rT and this could be readily reduced to give the D-ribo compound 50. The exclusive formation of 49 is unexpected and may be associated with a strong ster chemical induction by the chiral centers at C-1, C-4, and C-5. 

The mechanism by which the enantionselective oxidation occurs is generally similar to that for the vanadium-catalyzed oxidations. The allylic alcohol serves to coordinate the reactant to titanium. The tartrate esters are also coordinated at titanium, which creates a chiral environment. The active catalyst is believed to be a dimeric species. The mechanism involves rapid exchange of the allylic alcohol and t-butyl hydroperoxide at the titanium atom. 

Table 17) with two substituents in position C3 the oxygen transfer by the chiral hydroperoxides occurred from the same enantioface of the double bond, while epoxidation of the (ii)-phenyl-substituted substrates 142c,g,i resulted in the formation of the opposite epoxide enantiomer in excess. In 2000 Hamann and coworkers reported a new saturated protected carbohydrate hydroperoxide 69b , which showed high asymmetric induction in the vanadium-catalyzed epoxidation reaction of 3-methyl-2-buten-l-ol. The ee of 90% obtained was a milestone in the field of stereoselective oxygen transfer with optically active hydroperoxides. Unfortunately, the tertiary allylic alcohol 2-methyl-3-buten-2-ol was epoxidized with low enantioselectivity (ee 18%) with the same catalytic system . 

SCHEME 65. Vanadium-catalyzed asymmetric epoxidation of allylic alcohols with chiral hydroperoxides... 

Indeed, several interesting procedures based on three families of active catalysts organometallic complexes, phase-transfer compounds and titanium silicalite (TS-1), and peroxides have been settled and used also in industrial processes in the last decades of the 20th century. The most impressive breakthrough in this field was achieved by Katsuki and Sharpless, who obtained the enantioselective oxidation of prochiral allylic alcohols with alkyl hydroperoxides catalyzed by titanium tetra-alkoxides in the presence of chiral nonracemic tartrates. In fact Sharpless was awarded the Nobel Prize in 2001. 

Sharpless Asymmetric Epoxidation This is a method of converting allylic alcohols to chiral epoxy alcohols with very high enantioselectivity (i.e., with preference for one enantiomer rather than formation of racemic mixture). It involves treating the allylic alcohol with tert-butyl hydroperoxide, titanium(IV) tetra isopropoxide [Ti(0—/Pr)4] and a specific stereoisomer of tartaric ester. For example,... 

With a twist on the Sharpless asymmetric epoxidation protocol, Yamamoto and co-workers <99JOC338> have developed a chiral hydroxamic acid (17) derived from binaphthol, which serves as a coordinative chiral auxiliary when combined with VO(acac)j or VO(i-PrO)j in the epoxidation of allylic alcohols. In this protocol, triphenylmethyl hydroperoxide (TiOOH) provides markedly increased enantiomeric excess, compared to the more traditional t-butyl hydroperoxide. Thus, the epoxidation of E-2,3-diphenyl-2-propenol (18) with 7.5 mol% VO(i-PiO)3 and 15 mol% of 17 in toluene (-20 °C 24 h) provided the 2S,3S epoxide 19 in 83% ee. 

The chiral ligand (44) was prepared starting from the cyclic a-amino acid (S)-proline80). Recently, similar chiral catalysts and related molybdenum complexes involving optically active N-alkyl-P-aminoalcohols as stable chiral ligands and acetylacetone as a replaceable bidentate ligand, were designed for the epoxidation of allylic alcohols with alkyl hydroperoxides which could be catalyzed by such metal complexes 8,). 

TABLE 19. Comparison of published results for the asymmetric epoxidation of allylic alcohols employing chiral hydroperoxides, (yields are given ee and abs. configuration of the epoxides obtained are given in parentheses)... 

---