Allyl chloride preparation

Allyl Chloride. Comparatively poor yields are obtained by the zinc chloride - hydrochloric acid method, but the following procedure, which employs cuprous chloride as a catalyst, gives a yield of over 90 per cent. Place 100 ml. of allyl alcohol (Section 111,140), 150 ml. of concentrated hydrochloric acid and 2 g. of freshly prepared cuprous chloride (Section II,50,i one tenth scale) in a 750 ml. round-bottomed flask equipped with a reflux condenser. Cool the flask in ice and add 50 ml. of concen trated sulphuric acid dropwise through the condenser with frequent shaking of the flask. A little hydrogen chloride may be evolved towards the end of the reaction. Allow the turbid liquid to stand for 30 minutes in order to complete the separation of the allyl chloride. Remove the upper layer, wash it with twice its volume of water, and dry over anhydrous calcium chloride. Distil the allyl chloride passes over at 46-47°. 

Benzoic acid and naphthoic acid are formed by the oxidative carbonylation by use of Pd(OAc)2 in AcOH. t-Bu02H and allyl chloride are used as reoxidants. Addition of phenanthroline gives a favorable effect[360], Furan and thiophene are also carbonylated selectively at the 2-position[361,362]. fndole-3-carboxylic acid is prepared by the carboxylation of 1-acetylindole using Pd(OAc)2 and peroxodisulfate (Na2S208)[362aj. Benzoic acid derivatives are obtained by the reaction of benzene derivatives with sodium palladium mal-onate in refluxing AcOH[363]. 

Aldehydes can also be prepared by the carbonylation of aryl and alkenyl halides and triflate, and benzyl and allyl chlorides using tin hydride as a hydride source and Pd(PhjP)4 as a catalyst[377]. Hydrosilancs arc used as another hydride source[378]. The arenediazonium tetralluoroborate 515 is converted into a benzaldehyde derivative rapidly in a good yield by using Et ,SiH or PH MS as the hydride source[379]. 

The allyl-substituted cyclopentadiene 122 was prepared by the reaction of cyclopentadiene anion with allylic acetates[83], Allyl chloride reacts with carbon nucleophiles without Pd catalyst, but sometimes Pd catalyst accelerates the reaction of allylic chlorides and gives higher selectivity. As an example, allylation of the anion of 6,6-dimethylfulvene 123 with allyl chloride proceeded regioselectively at the methyl group, yielding 124[84]. The uncatalyzed reaction was not selective. 

Ketones can be prepared by trapping (transmetallation) the acyl palladium intermediate 402 with organometallic reagents. The allylic chloride 400 is car-bonylated to give the mixed diallylic ketone 403 in the presence of allyltri-butylstannane (401) in moderate yields[256]. Alkenyl- and arylstannanes are also used for ketone synthesis from allylic chlorides[257,258]. Total syntheses of dendrolasin (404)f258] and manoalide[259] have been carried out employing this reaction. Similarly, formation of the ketone 406 takes place with the alkylzinc reagent 405[260],... 

The /3,7-unsaturated aldehyde 407 is prepared in good yields by the carbo-nylation of an allylic chloride under mild conditions using tributyltin hydride as a hydride source[261]. Aldehydes are obtained in moderate yields by the reaction of CO and H2[262],... 

The cyclic enol ether 255 from the functionalized 3-alkynoI 254 was converted into the furans 256 by the reaction of allyl chloride, and 257 by elimination of MeOH[132], The alkynes 258 and 260, which have two hydroxy groups at suitable positions, are converted into the cyclic acetals 259 and 261. Carcogran and frontalin have been prepared by this reaction[124]. 

Although alkenes typically react with chlorine and bromine by addition at room tern perature and below (Section 6 14) substitution becomes competitive at higher tempera tures especially when the concentration of the halogen is low When substitution does occur It IS highly selective for the allylic position This forms the basis of an industrial preparation of allyl chloride... 

Compound 1, 2,2-diniethyl-4-pentenal, has been prepared by the Claisen rearrangement route described above and by reaction of isobutyraldehyde with allyl chloride in the presence of aqueous sodium hydroxide and a phase-transfer catalyst. Both routes are applicable to the synthesis of a variety of substituted 4-pentenals. 

Allyl cyanide has been found in oil of mustard 1 and has been prepared from allyl chloride and potassium cyanide,2 allyl bromide and potassium cyanide,3 allyl iodide and potassium cyanide4 and silver cyanide.5 The method described in the procedure is essentially that of Bruylants, who has shown that the yields are much better when dry cuprous cyanide is treated with allyl bromide.6... 

Few reports describe the cross metathesis of allyl halides [88]. First-generation catalyst 9 does not seem to be sufficiently reactive to promote this reaction in preparatively useful yields and acceptable catalyst loadings, but second-generation catalyst 56d gives good results for allyl chloride. Cross-metathesis... 

Previous syntheses of terminal alkynes from aldehydes employed Wittig methodology with phosphonium ylides and phosphonates. 6 7 The DuPont procedure circumvents the use of phosphorus compounds by using lithiated dichloromethane as the source of the terminal carbon. The intermediate lithioalkyne 4 can be quenched with water to provide the terminal alkyne or with various electrophiles, as in the present case, to yield propargylic alcohols, alkynylsilanes, or internal alkynes. Enantioenriched terminal alkynylcarbinols can also be prepared from allylic alcohols by Sharpless epoxidation and subsequent basic elimination of the derived chloro- or bromomethyl epoxide (eq 5). A related method entails Sharpless asymmetric dihydroxylation of an allylic chloride and base treatment of the acetonide derivative.8 In these approaches the product and starting material contain the same number of carbons. 

The majority of catalytic enantioselective allylation reactions involve the chiral Lewis-acid-catalysed additions of allylsilanes or allylstannanes to carbonyl compounds. Monothiobinaphthol has been used by Woodward et al. as a chiral promoter in the enantioselective catalytic allylation of aryl ketones with impure Sn(allyl)4, prepared from allyl chloride, air-oxidised magnesium and SnCl4. Therefore, the allylation of arylketones in these conditions was achieved very efficiently, since the corresponding allylic alcohols were formed in... 

A routine preparation by interaction of allyl chloride and sodium thiocyanate in an autoclave at 5.5 bar exploded violently at the end of the reaction. Peroxides were not present or involved and no other cause could be found, but extensive decomposition occurred when allyl isothiocyanate was heated to 250°C in glass ampoules. Exothermic polymerisation seems a likely possibility. 

ABA triblock copolymers, where A was PBd and B either PS or PMMA were prepared by the combination of ROMP and ATRP techniques [122], The PBd middle blocks were obtained through the ROMP of cyclooctadi-ene in the presence of l,4-chloro-2-butene or cis-2-butene-l,4-diol bis(2-bromo)propionate using a Ru complex as the catalyst. The end allyl chloride or 2-bromopropionyl ester groups were subsequently used for the ATRP of either styrene or MMA using CuX/bpy (X = Cl or Br) as the catalytic system (Scheme 50). Quantitative yields but rather broad molecular weight distributions (Mw/Mn higher than 1.4) were obtained. 

In a similar way to allyl chloride, benzyl halides also react smoothly with zirconacyclopentadienes in the presence of CuCl. An interesting reaction is shown in Eq. 2.35, whereby the benzo-type eight-membered ring compound 49 can be prepared [7j]. 

Initial attempts at preparing y,y-disubstituted allyl chlorides employing thionyl chloride in the presence of tributylamine5 led to appreciable amounts of rearranged (tertiary) halides. 

The phase-transfer catalysed reaction of nickel tetracarbonyl with sodium hydroxide under carbon monoxide produces the nickel carbonyl dianions, Ni,(CO) 2- and Ni6(CO)162, which convert allyl chloride into a mixture of but-3-enoic and but-2-enoic acids [18]. However, in view of the high toxicity of the volatile nickel tetracarbonyl, the use of the nickel cyanide as a precursor for the carbonyl complexes is preferred. Pretreatment of the cyanide with carbon monoxide under basic conditions is thought to produce the tricarbonylnickel cyanide anion [19], as the active metal catalyst. Reaction with allyl halides, in a manner analogous to that outlined for the preparation of the arylacetic acids, produces the butenoic acids (Table 8.7). 

Preparation of the intermediate for Allobarbitone (diethyl diallyl malonate). Diethyl malonate is dissolved in anhydrous alcohol and treated with one mole of clean sodium meted per every one mole of the ester. To this solution add one mole of allyl chloride and reflux for about 4 hours. Another equimolar ratio (1 mole of sodium per mole of ester) of sodium is added, followed by the same ratio of allyl chloride (1 mole per 1 mole), and this mixture is boiled for 2 hours. The alcohol is removed by distillation and the ester is extracted with benzene and distilled or evaporated in vacuo, recrystallized with a suitable "dry" solvent, and filtered. Evaporate again to remove traces of solvent. Keep this product, and any other substances that require dry reagents or solvents, stored away from contact with the atmosphere. When evaporating, filter the air coming into the evaporating vessel with a suitable drying agent. Use a little common sense. 

---