Alkynes intramolecular addition

Terminal alkynes readily react with coordinatively unsaturated transition metal complexes to yield vinylidene complexes. If the vinylidene complex is sufficiently electrophilic, nucleophiles such as amides, alcohols or water can add to the a-carbon atom to yield heteroatom-substituted carbene complexes (Figure 2.10) [129 -135]. If the nucleophile is bound to the alkyne, intramolecular addition to the intermediate vinylidene will lead to the formation of heterocyclic carbene complexes [136-141]. Vinylidene complexes can further undergo [2 -i- 2] cycloadditions with imines, forming azetidin-2-ylidene complexes [142,143]. Cycloaddition to azines leads to the formation of pyrazolidin-3-ylidene complexes [143] (Table 2.7). 

Hydrocarboxylation of Alkynes Intramolecular addition of carboxylic acids (weak nucleophiles) to alkynes led to lactones, which were first reported by Schmidbaur et al. in the reaction of acetic add with 3-hexynes to obtain, in addition to enol ester, 3-hexanone. Traces of water were probably present in the solvent to enable the process to be carried out [99]. 

Amines undergo aminopalladation to alkynes. The intramolecular addition of amines to alkynes yields cyclic imines. The 3-alkynylamine 273 was cyclized to the 1-pyrroline 274, and the 5-alkynylamine 275 was converted into the 2,3,4,5-tetrahydropyridine 276[137]. Cyclization of o-(l-hexynyl)aniline (277)... 

Vinyl radical formation by intramolecular addition of a carbon-centered radical to an alkyne... 

Secondary amines can be added to certain nonactivated alkenes if palladium(II) complexes are used as catalysts The complexation lowers the electron density of the double bond, facilitating nucleophilic attack. Markovnikov orientation is observed and the addition is anti An intramolecular addition to an alkyne unit in the presence of a palladium compound, generated a tetrahydropyridine, and a related addition to an allene is known.Amines add to allenes in the presence of a catalytic amount of CuBr " or palladium compounds.Molybdenum complexes have also been used in the addition of aniline to alkenes. Reduction of nitro compounds in the presence of rhodium catalysts, in the presence of alkenes, CO and H2, leads to an amine unit adding to the alkene moiety. An intramolecular addition of an amine unit to an alkene to form a pyrrolidine was reported using a lanthanide reagent. 

A somewhat unusual sequence to generate azepanones 80 involved the intramolecular addition of hydroxylamines to alkynes 76 to form cyclic nitrones 77. A vinyl magnesium bromide addition at low temperatures and a reduction with TiCls followed by N-Boc protection led to the azepane 78. Double bond bromination and subsequent RUO4 oxidation gave the lactam 79. Several further steps allowed the generation of the lactam structure 80 proposed for d,/-aca-cialactam, but the spectral data of the synthetic material differed from that of the natural product (Scheme 16)] [23 a, b]. 

The intramolecular addition of the O-H bond to alkynes catalyzed by palladium complexes has been developed by K. Utimoto et al. (Eq. 6.59) [104]. An alkynyl alcohol can be converted to a cyclic alkenyl ether in the presence of a catalytic amount of [PdCl2(PhCN)2 or [PdCl2(MeCN)2] in ether or THE at room temperature. When the reaction was carried out in MeCN-H20 under reflux in the presence of a catalytic amount of PdCl2, hydration of the acetylenic alcohol occurred and the ketoalcohol was obtained in good yield instead. 

Trost and coworkers [131] synthesized oxaheterocycles by a Pd-catalyzed addition of terminal alkynes onto hydroxyalkynoates, followed by an intramolecular addition of the hydroxyl functionality on the triple bond. Simple lactonization may take place as a side reaction. 

Depending on the nature of the substrates, selectivity could be completely reversed between the two isomeric products. For example, switching R1 group between Buc and Ph gave high yields of the first and second product structures, respectively. The authors noted that the reaction did not proceed if the imine contained an ortho-MeO group at R2 or if the imine was replaced with an aldehyde, oxime, or hydrazone. The catalytic cycle is initiated by C-H activation of the imine, that is, the formation of a five-membered metallocycle alkyne insertion affords the intermediate drawn in Scheme 69. It is noteworthy that this is the first report of catalytic synthesis of indene derivatives via a C-H insertion mechanism (C-H activation, insertion, intramolecular addition). 

Recent results on the chemistry of persistent vinyl cations are summarized. / , / -Disilyl-substituted vinyl cations were synthesized by intramolecular addition of transient silylium ions to alkynes. The vinyl cations are stable at ambient temperature and were isolated in the form of their tetrakispentafluorophenylborate and hexabromocarboranate salts. The vinyl cations were characterized by IR and NMR spectroscopy and by X-ray crystallography. The experimental results for the a-alkyl- and a-aryl-substituted vinyl cations confirm their Y-shape structures, consisting of a linear dicoordinated, formally positively charged a-carbon atom and a trigonal planar coordinated /f-carbon atom. In addition, the spectroscopic data clearly indicate the consequences of, / -silyl hyperconjugation in these vinyl cations. Scope and limitations of the synthetic approach to vinyl cations via addition of silylium ions to C=C triple bonds are discussed. 

On the basis of these results we embarked on a systematic study on the synthesis of vinyl cations by intramolecular addition of transient silylium ions to C=C-triple bonds using alkynyl substituted disila alkanes 6 as precursors.(35-37) In a hydride transfer reaction with trityl cation the alkynes 6 are transformed into the reactive silylium ions 7. Under essentially nonHnucleophilic reaction conditions, i.e. in the presence of only weakly coordinating anions and using aromatic hydrocarbons as solvents, the preferred reaction channel for cations 7 is the intramolecular addition of the positively charged silicon atom to the C=C triple bond which results in the formation of vinyl cations 8-10 (Scheme 1). 

Fig. 4.4. Formation of vinylcarbene rhodium complexes by intramolecular addition of acylcarbene rhodium complexes to alkynes [1065].

The intramolecular addition of acylcarbene complexes to alkynes is a general method for the generation of electrophilic vinylcarbene complexes. These reactive intermediates can undergo inter- or intramolecular cyclopropanation reactions [1066 -1068], C-H bond insertions [1061,1068-1070], sulfonium and oxonium ylide formation [1071], carbonyl ylide formation [1067,1069,1071], carbene dimerization [1066], and other reactions characteristic of electrophilic carbene complexes. 

The synthesis of oxygen heterocycles in which cyclization onto a pendant alkyne is a key step has also been achieved. Reaction (7.36) shows an example of iodoacetal 29 cyclization at low temperature that afforded the expected furanic derivative in moderate Z selectivity [47]. A nice example of Lewis acid complexation which assists the radical cyclization is given by aluminium tris(2,6-diphenyl phenoxide) (ATPH) [48]. The (3-iodoether 30 can be com-plexed by 2 equiv of ATPH, which has a very important template effect, facilitating the subsequent radical intramolecular addition and orienting the (TMS)3SiH approach from one face. The result is the formation of cyclization products with Z selectivity and in quantitative yield (Reaction 7.37). 

Taking advantage of a tandem sulfoxide elimination-sulfenic acid addition approach to cyclic sulfoxides <1977J(P1)1574>, the synthesis of a number of novel 1,4-oxathiane oxides 229 and 230 based on the intramolecular addition of sulfenic acids to alkenes or alkynes tethered through an ether linkage has been reported (Equation 38) <20050BC404>. 

Friedrichsen and co-workers (133) approached substituted benzotropolones from an aromatic substituted carbonyl ylide with a tethered alkyne as the intramolecular dipolarophUe (Scheme 4.67). Starting from an aromatic anhydride, Friedrichsen was able to make the tethered alkyne via addition of either pentyn-ol or hexyn-ol, then transform the recovered benzoic acid to the a-diazocarbonyl cycloaddition precursor. Addition of rhodium acetate resulted in the tandem formation of cyclic carbonyl ylide followed by cycloaddition of the tethered alkyne producing the tricyclic constrained ether 252. Addition of BF3 OEt2 opened the ether bridge, forming the benzotropylium ion, which subsequently rearranged to form the tricyclic benzotropolone (253). 

II. CARBOMAGNESIATION REACTIONS OF ALKYNES A. Intramolecular Addition to Simple Alkynes... 

Whereas the intermolecular uncatalyzed allylzincations of unactivated monosubstituted alkenes or disubstituted alkynes do not proceed readily, successful examples of intramolecular additions have been reported. 

Hydroamination of Alkynes The discovery of palladium-catalyzed intramolecular addition of amines to acetylene coupled with the spectacular contribution of Hutchings opened the door for the synthesis of several nitrogen heterocycles. The first study in this field was performed by Utimoto et al., who researched gold catalyzed intramolecular 6-exo-dig hydroamination. Tautomerization of the initial enamines allowed them to obtain imines, which were thermodynamically more stable [111] (Scheme 8.20). 

The latter transformation requires the use of a small amount of an acid or its ammonium salt. By using [Cp2TiMe2] as the catalyst, primary anilines as well as steri-cally hindered tert-alkyl- and sec-alkylamines can be reacted.596 Hydroamination with sterically less hindered amines are very slow. This was explained by a mechanism in which equlibrium between the catalytically active [L1L2Ti=NR] imido complex and ist dimer for sterically hindered amines favors a fast reaction. Lantha-nade metallocenes catalyze the regiospecific addition of primary amines to alkenes, dienes, and alkynes.598 The rates, however, are several orders of magnitude lower than those of the corresponding intramolecular additions. 

Pyrrole and indole rings can also be constructed by intramolecular addition of nitrogen to a multiple bond activated by metal ion complexation. Thus, 1-aminomethyl-l-alkynyl carbinols (obtained by reduction of cyanohydrins of acetylenic ketones) are cyclized to pyrroles by palladium(II) salts. In this reaction the palladium(II)-complexed alkyne functions as the electrophile with aromatization involving elimination of palladium(II) and water (Scheme 42) (81TL4277). 

Ito and co-workers have also used the Pd(OAc)2/t-alkyl isocyanide catalyst to affect the double silylation of carbon-carbon multiple bonds in an intramolecular system to yield silacarbocycles.59 Alkenes or alkynes that are tethered to a disilanyl group through a carbon chain, an ether linkage, or an amine functionality undergo intramolecular addition of the disilane moiety to the multiple bond. Activation of the disilane by the presence of electron-withdrawing groups on silicon is not necessary for the reaction to... 

Benzofurans and dihydrobenzofurans have been prepared on polymeric supports by the palladium-mediated reaction of 2-iodophenols with dienes or alkynes (Entries 1 and 2, Table 15.9). This reaction is closely related to the synthesis of indoles from 2-iodoanilines, and probably proceeds via an intermediate palladacycle (Figure 15.3). Benzofuran and isobenzofuran derivatives have also been prepared on cross-linked polystyrene by intramolecular addition of aryl radicals to C=C double bonds and by intramolecular Heck reaction. 

The reaction of 2,2,5,5,6,6,9,9-octamethyl-3,7-decadiyne 206 with S2C12 gave a 4/7,5/7-thiepine 209, as the sole product, in 99% yield <2000TL8349>. The formation of 209 was explained as shown in Scheme 27. The addition of S2C12 to one alkyne moiety produced adduct 207. Intramolecular addition of the intermediate 207 provided cyclic disulfide 208 then, dihydrothiepine 209 may form from disulfide 208 by loss of sulfur. 

---