Alkyl with thioureas

Scheme 35.31 Mandelic acid-assisted F-C alkylation with thiourea ent-19.

S-Alkyl-iso-thiuronium picrates. Alkyl bromides or iodides react with thiourea in alcoholic solution to produce S-alkyl-iso-thiuronium salts, which yield picrates of sharp melting point ... 

A better method involves the interaction of an alkyl bromide and thiourea to form an alkyl tso-thiourea, followed by hydrolysis of the latter with sodium hydroxide solution, for example ... 

Because of the structural requirements of the bielectrophile, fully aromatized heterocycles are usually not readily available by this procedure. The dithiocarbamate (159) reacted with oxalyl chloride to give the substituted thiazolidine-4,5-dione (160) (see Chapter 4.19), and the same reagent reacted with iV-alkylbenzamidine (161) at 100-140 °C to give the 1 -alkyl-2-phenylimidazole-4,5-dione (162) (see Chapter 4.08). Iminochlorides of oxalic acid also react with iV,iV-disubstituted thioureas in this case the 2-dialkylaminothiazolidine-2,4-dione bis-imides are obtained. Thiobenzamide generally forms linear adducts, but 2-thiazolines will form under suitable conditions (70TL3781). Phenyliminooxalic acid dichloride, prepared from oxalic acid, phosphorus pentachloride and aniline in benzene, likewise yielded thiazolidine derivatives on reaction with thioureas (71KGS471). 

Although the first all-sulfur macrocycles were prepared many years ago " the first systematic study of such compounds was initiated by Busch and his coworkers , who were interested in the cation binding properties of such ligands. A sequential synthesis was utilized to produce 1,4,8,11-tetrathiacyclotetradecane [tetrathia-14-crown-4 (70)] . In the first step, 1,3-propanedithiol is metallated using sodium and alkylated with 2-chloroethanol. The diol was then treated with thiourea to form the dimercapto-dithioether compound 9. The latter was once again metallated with sodium and allowed to react with 1,3-dibromopropane. The yield of 70 in the ring closure step, conducted at high dilution in absolute ethanol, was 7.5% after recrystallization. The entire sequence is illustrated in Eq. (6.8) . ... 

A somewhat more complex side chain is incorporated by alkylation of the carbanion of the substituted cyanoacetate, 148, with 2-chloroethylmethyl sulfide. Condensation of the resulting cyanoester (149) with thiourea followed by hydrolysis of the resulting imine (150) affords methitural (151)... 

Thiols, the sulfur analogs of alcohols, are usually prepared by Sjv 2 reaction of an alkyl halide with thiourea. Mild oxidation of a thiol yields a disulfide, and mild reduction of a disulfide gives back the thiol. Sulfides, the sulfur analogs of ethers, are prepared by an Sk2 reaction between a thiolate anion and a primary or secondary alkyl halide. Sulfides are much more nucleophilic than ethers and can be oxidized to sulfoxides and to sulfones. Sulfides can also be alkylated by reaction with a primary alkyl halide to yield sulfonium ions. 

An acylated glycosyl halide, such as a 2,3,4,6-tetra-O-acetyl derivative, is treated with thiourea. The resulting pseudothiouronium salt is hydrolyzed with aqueous potassium carbonate to give the 2,3,4,6-tetra-0-acetyl-l-thio-(3-D-glucopyranose,48 which then is alkylated. 

Reaction of nitrosothioureas with alkylamines gives TV-mono- or di-alkyl substituted thioureas (Scheme 53).135... 

When the 3-thiourea derivative (59) was heated in boiling ethanol for 3 h, and then the evaporated reaction mixture was treated with 10% NaOH solution at 100°C for 20 min, anhydro 2-methyl-3-mercapto-4-hydroxy-5,6,7,8-tetrahydro[l,2-6]pyridazinium hydroxide (61) was obtained (71CPB159). The mercapto group was alkylated with benzyl bromide and was treated with HgCla in boiling ethanol to yield the 3-chloromercurithio derivative. Anhydro 3,4-dihydroxy-2-methyl-5,6,7,8-tetrahydropyrido[l,2-f ]pyridazinium hydroxide (62) was O-acylated with acetic anhydride, but the structure of the product was not elucidated (71CPB159). 

A special case of SNAr is shown in Fig. 20. It actually involves a tandem 8 2-SNAr process on an Ugi adduct containing both an alkyl and an aryl halide. In 99, the acid-derived alkyl halide behaves therefore as a masked nucleophile. Treatment with thiourea (Sn2) forms an intermediate thiouronium salt which, upon basic hydrolysis, releases the required thiolate that undergoes the SnAt process. A library of benzothiazepinones 100 was produced in this way [92]. 

Thiopental Thiopental, 5-ethyl-5-(l-methylbutyl)2-thiobarbituric acid (1.2.10), is synthesized by the alkylation of ethyhnalonic ester with 2-bromopentane in the presence of sodium ethoxide. The product ethyl-(l-methylbutyl)malonic ester (1.2.9) undergoes hete-rocyclization with thiourea, using sodium ethoxide as a base [16,17]. 

A comparatively large selection of thioureas can be formed from the reaction of amines with isothiocyanates, hence they are attractive starting materials for formation of guanidines. A common solution-phase approach to this reaction involves abstraction of the sulfur via a thiophillic metal salt, like mercuric chloride.10 For solid-phase syntheses, however, formation of insoluble heavy-metal sulfides can have undesirable effects on resin properties and on biological assays that may be performed on the product. A more relevant strategy, with respect to this chapter, is S-alkylation of thioureas and then reaction of the methyl carbamimidothioates formed (e.g., 5, Scheme 6) with amines. This type of process has been used extensively in solution-phase syntheses.1 Ul4 Two examples are shown in Scheme 6 11 the second is an intramolecular variant, which involves concomitant detrity-lation.15... 

Chloroacetylbenzo[6]thiophene and its alkyl derivatives react with thiourea to give the corresponding 5-(3-benzo[6]thienyl)-2-aminothiazole.132 3-Acetamidoacetylbenzo[6]thiophene affords 2-methyl-5-(3-benzo[6]thienyl)thiazole on treatment with phosphorus... 

---