Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkenes alkyl substituted

Acyclic alkenes, alkyl-substituted, asymmetric hydrosilylation, 10, 828... [Pg.39]

Most of the published kinetic data on base-catalyzed alkene isomerizations are for reactions of I-alkenes. Alkyl substitution stabilizes alkenes and products of isomerization of terminal alkenes isomerize at slower rates than their precursors. Rates of isomerization of methylcycloalkenes can be estimated from kinetic and equilibrium data or measured directly These compounds isomerize at slower rates than the corresponding methylenecycloalkanes, as expected. [Pg.445]

Bromine addition in [BMIM][PF6] and [BMIM][BF4] is a stereospecific anti-addition process with dialkyl substituted alkenes, alkyl substituted alkynes and trans-stilbenes, whereas ds-stilbenes and aryl alkynes give mixtures of syn- and anti-addition products, although in the case of dx-diaryl substituted olefins the anti-stereoselectivity is generally higher than in chlorinated solvents. In the case of diaryl substituted olefins, such as stilbenes, it has been shown that stereoselectivity in molecular solvents depends primarily on two factors (i) the nature of the intermediates and (ii) the lifetime of the ionic intermediates [53]. Bridged bromiranium... [Pg.284]

Because most of the negative charge is on the osrygen, relative enolate stabilities follow those of alkenes Alkyl substitution stabilizes the double bond by hyperconjugation. [Pg.791]

N,N,N, N -tetramethyl-l,8,-naph-thalenediamiDe M.P. 51 C. A remarkably strong mono-acidic base (pKg 12-3) which is almost completely non-nucleophilic and valuable for promoting organic elimination reactions (e.g. of alkyl halides to alkenes) without substitution. [Pg.60]

Chlorination generally exhibits second-order kinetics, first-order in both alkene and chlorine. The reaction rate also increases with alkyl substitution, as would be expected for an electtophilic process. The magnitude of the rate increase is quite large, as shown in Table 6.3. [Pg.366]

This scheme represents an alkyne-bromine complex as an intermediate in all alkyne brominations. This is analogous to the case of alkenes. The complex may dissociate to a inyl cation when the cation is sufficiently stable, as is the case when there is an aryl substituent. It may collapse to a bridged bromonium ion or undergo reaction with a nucleophile. The latta is the dominant reaction for alkyl-substituted alkynes and leads to stereospecific anti addition. Reactions proceeding through vinyl cations are expected to be nonstereospecific. [Pg.375]

The rates of hydration of alkenes increase dramatically with increasing alkyl substitution (see table at left). This is usually attributed to the relative stabilities of carbocations formed as intermediates in the initial (and rate-hmiting) step of the reaction, e.g., for hydration of propene. [Pg.104]

Alkyl-Substituted 4-Hydroxy-l-alkenes General Procedure ... [Pg.877]

Similarly, the reaction of the parent thiirane dioxide, the 2-chloro- and 2,3-cis-dimethylthiirane dioxides with either Grignard or alkyl lithium reagents, has been studied extensively. The fair-to-good yields of the sulfinates (62) obtained (48-82%), accompanied by ethylene (or the corresponding alkenes for substituted thiirane dioxide), have been interpreted in terms of initial nucleophilic attack of the base on the sulfur atom as depicted in equation 17116. [Pg.405]

The first step in this preparation, the epoxidation of 1,4,5,8-tetra-hydronaphthalene, exemplifies the well-known selectivity exerted by peracids in their reaction with alkenes possessing double bonds that differ in the degree of alkyl substitution.12 As regards the method of aromatization employed in the conversion of ll-oxatricyclo[4.4.1.01-6]-undeca-3,8-diene to l,6-oxido[10]annulene, the two-step bromination-dehydrobromination sequence is given preference to the one-step DDQ-dehydrogenation, which was advantageously applied in the synthesis of l,6-metliano[10]annulene,2,9 since it affords the product in higher yield and purity. [Pg.90]

Complexes of the type 48-53 (Scheme 2.7) have been targeted as pre-catalysts for the hydrosilylation of alkenes [44]. For example, in the hydrosilylation of 1-octene with (Me3SiO)2Si(Me)H, which was studied in detail as a model reaction, the activity of complexes 48-49 with alkyl substituted NHC ligands, is inferior to that of the Karstedt s system. However, selectivity and conversions are dramatically improved due to the suppression of side-product formation. In this reaction... [Pg.32]

Some hydrometalation reactions have been shown to be catalyzed by zirconocene. For instance, CpiZrCf-catalyzed hydroaluminations of alkenes [238] and alkynes [239] with BU3AI have been observed (Scheme 8-34). With alkyl-substituted internal alkynes the process is complicated by double bond migration, and with terminal alkynes double hydrometalation is observed. The reaction with "PrjAl and Cp2ZrCl2 gives simultaneously hydrometalation and C-H activation. Cp2ZrCl2/ BuIi-cat-alyzed hydrosilation of acyclic alkenes [64, 240] was also reported to involve hydrogen transfer via hydrozirconation. [Pg.273]

Addition is initiated by the positively polarised end (the less electronegative halogen atom) of the unsymmetrical molecule, and a cyclic halonium ion intermediate probably results. Addition of I—Cl is particularly stereoselective (ANTI) because of the ease of formation (and relative stability compared with carbocations) of cyclic iodonium ions. With an unsymmetrical alkene, e.g. 2-methylpropene (32), the more heavily alkyl-substituted carbon will be the more carbocationic (i.e. the less bonded to Br in 33), and will therefore be attacked preferentially by the residual nucleophile, Cle. The overall orientation of addition will thus be Markownikov to yield (34) ... [Pg.186]

Finally, the major structural features in the substrate promoting E2 elimination are those that serve to stabilise the resultant alkene or, more particularly, the T.S. that precedes it. Such features include increasing alkyl substitution at both a- and //-carbon atoms (leading to alkenes of increasing thermodynamic stability), or introduction of a phenyl group that can become conjugated with the developing double bond. [Pg.253]

Some remarks concerning the scope of the cobalt chelate catalysts 207 seem appropriate. Terminal double bonds in conjugation with vinyl, aryl and alkoxy-carbonyl groups are cyclopropanated selectively. No such reaction occurs with alkyl-substituted and cyclic olefins, cyclic and sterically hindered acyclic 1,3-dienes, vinyl ethers, allenes and phenylacetylene95). The cyclopropanation of electron-poor alkenes such as acrylonitrile and ethyl acrylate (optical yield in the presence of 207a r 33%) with ethyl diazoacetate deserve notice, as these components usually... [Pg.165]

Schrock has proposed that the reverse reaction occurs during some catalytic alkene dimerisation reactions (20) but, in studies of decomposition of alkyl substituted platinacyclobutanes, no... [Pg.345]

Electrophilic substitution of the ring hydrogen atom in 1,3,4-oxadiazoles is uncommon. In contrast, several reactions of electrophiles with C-linked substituents of 1,3,4-oxadiazole have been reported. 2,5-Diaryl-l,3,4-oxadiazoles are bromi-nated and nitrated on aryl substituents. Oxidation of 2,5-ditolyl-l,3,4-oxadiazole afforded the corresponding dialdehydes or dicarboxylic acids. 2-Methyl-5-phenyl-l,3,4-oxadiazole treated with butyllithium and then with isoamyl nitrite yielded the oxime of 5-phenyl-l,3,4-oxadiazol-2-carbaldehyde. 2-Chloromethyl-5-phenyl-l,3,4-oxadiazole under the action of sulfur and methyl iodide followed by amines affords the respective thioamides. 2-Chloromethyl-5-methyl-l,3,4-oxadia-zole and triethyl phosphite gave a product, which underwent a Wittig reation with aromatic aldehydes to form alkenes. Alkyl l,3,4-oxadiazole-2-carboxylates undergo typical reactions with ammonia, amines, and hydrazines to afford amides or hydrazides. It has been shown that 5-amino-l,3,4-oxadiazole-2-carboxylic acids and their esters decarboxylate. [Pg.420]

Asymmetric Hydrosilylation of Alkyl-Substituted Acyclic Alkenes 828... [Pg.815]

For the majority of substrates only trace amounts (<10%) of the self-metathesis products were isolated. Cross-/self-metathesis selectivity was significantly lowered, however, by the inductive effect of electron-withdrawing substituents on the alkyl-substituted alkene. Even moving a bromide one carbon closer to the double bond resulted in a significant decrease in the cross-/self-metathesis ratio (Eq.7). [Pg.169]

This correlation, between metathesis selectivity and the nucleophilicity of the alkyl-substituted alkene, was explained by considering the possible intermediate metallacyclobutanes 9-12 formed in the reaction (see Scheme 2). [Pg.169]

Crowe proposed that benzylidene 6 would be stabilised, relative to alkylidene 8, by conjugation of the a-aryl substituent with the electron-rich metal-carbon bond. Formation of metallacyclobutane 10, rather than 9, should then be favoured by the smaller size and greater nucleophilicity of an incoming alkyl-substituted alkene. Electron-deficient alkyl-substituents would stabilise the competing alkylidene 8, leading to increased production of the self-metathesis product. The high trans selectivity observed was attributed to the greater stability of a fra s- ,p-disubstituted metallacyclobutane intermediate. [Pg.169]

The reaction tolerated a variety of functionality, including ester and ether groups on the alkyl-substituted alkene at least two carbons away from the double bond, and raefa-nitro or para-methoxy substituents on the styrene. As expected, cross-metathesis occurred selectively at the less hindered monosubsti-tuted double bond of dienes also containing a disubstituted alkene (Eq. 8). [Pg.170]

A year later, Schrock confirmed that the cross-metathesis of two alkyl-substituted terminal alkenes could also be catalysed by his molybdenum catalyst [26] (Eq. 9). [Pg.170]

Previously acrylonitrile had proved to be inert towards transition metal catalysed cross- and self-metathesis using ill-defined multicomponent catalysts [lib]. Using the molybdenum catalyst, however, acrylonitrile was successfully cross-metathesised with a range of alkyl-substituted alkenes in yields of40-90% (with the exception of 4-bromobut-l-ene, which gave a yield of 17.5%). A dinitrile product formed from self-metathesis of the acrylonitrile was not observed in any of the reactions and significant formation (>10%) of self-metathesis products of the second alkene was only observed in a couple of reactions. [Pg.171]


See other pages where Alkenes alkyl substituted is mentioned: [Pg.2826]    [Pg.2826]    [Pg.182]    [Pg.375]    [Pg.61]    [Pg.338]    [Pg.922]    [Pg.931]    [Pg.1242]    [Pg.1315]    [Pg.29]    [Pg.68]    [Pg.276]    [Pg.354]    [Pg.150]    [Pg.153]    [Pg.238]    [Pg.315]    [Pg.239]    [Pg.322]    [Pg.174]    [Pg.282]    [Pg.304]    [Pg.903]    [Pg.272]   
See also in sourсe #XX -- [ Pg.36 ]

See also in sourсe #XX -- [ Pg.38 ]

See also in sourсe #XX -- [ Pg.38 ]




SEARCH



2-Substituted alkyl 3-

Alkenes alkylated

Alkenes substitution

Alkyl substitute

Alkylation alkene

Substitution alkylation

© 2024 chempedia.info