Alkaline fuel cells temperature

Datta J, Dutta A, Mukherjee S (2011) The beneficial role of the Cometals Pd and Au in the carbon-supported PtPdAu catalyst toward promoting ethanol oxidation kinetics in alkaline fuel cells temperature effect and reaction mechanism. J Phys Chem C 115(31) 15324—15334... 

Alkaline Fuel Cell. The electrolyte ia the alkaline fuel cell is concentrated (85 wt %) KOH ia fuel cells that operate at high (- 250° C) temperature, or less concentrated (35—50 wt %) KOH for lower (<120° C) temperature operation. The electrolyte is retained ia a matrix of asbestos (qv) or other metal oxide, and a wide range of electrocatalysts can be used, eg, Ni, Ag, metal oxides, spiaels, and noble metals. Oxygen reduction kinetics are more rapid ia alkaline electrolytes than ia acid electrolytes, and the use of non-noble metal electrocatalysts ia AFCs is feasible. However, a significant disadvantage of AFCs is that alkaline electrolytes, ie, NaOH, KOH, do not reject CO2. Consequentiy, as of this writing, AFCs are restricted to specialized apphcations where C02-free H2 and O2 are utilized. 

Alkaline fuel cells (AFCs). The electrolyte is 40 to 70% KOH, the working temperatures are 60 to 240°C. Such systems were used in the spacecraft of the Apollo program and in the U.S. space shuttle. 

There are six different types of fuel cells (Table 1.6) (1) alkaline fuel cell (AFC), (2) direct methanol fuel cell (DMFC), (3) molten carbonate fuel cell (MCFC), (4) phosphoric acid fuel cell (PAFC), (5) proton exchange membrane fuel cell (PEMFC), and (6) the solid oxide fuel cell (SOFC). They all differ in applications, operating temperatures, cost, and efficiency. 

This edition of the Fuel Cell Handbook is more comprehensive than previous versions in that it includes several changes. First, calculation examples for fuel cells are included for the wide variety of possible applications. This includes transportation and auxiliary power applications for the first time. In addition, the handbook includes a separate section on alkaline fuel cells. The intermediate temperature solid-state fuel cell section is being developed. In this edition, hybrids are also included as a separate section for the first time. Hybrids are some of the most efficient power plants ever conceived and are actually being demonstrated. Finally, an updated list of fuel cell URLs is included in the Appendix and an updated index assists the reader in locating specific information quickly. 

Alkaline Fuel Cell (AFC) The electrolyte in this fuel cell is concentrated (85 wt%) KOH in fuel cells operated at high temperature ( 250°C), or less concentrated (35-50 wt%) KOH for lower temperature (<120°C) operation. The electrolyte is retained in a matrix (usually asbestos), and a wide range of electrocatalysts can be used (e.g., Ni, Ag, metal oxides, spinels, and noble metals). The fuel supply is limited to non-reactive constituents except for hydrogen. CO is a poison, and CO2 will react with the KOH to form K2CO3, thus altering the electrolyte. Even the small amount of CO2 in air must be considered with the alkaline cell. 

Reasonable performance is exhibited by alkaline cells operated at low temperatures (room temperature up to about 70°C). This is because the conductivity of KOH solutions is relatively high at low temperatures. For instance an alkaline fuel cell designed to operate at 70°C will reduce to only half power level when its operating temperature is reduced to room temperature (20). 

Alkaline fuel cells (AFCs) were one of the first fuel cell technologies developed, and they were the first type widely used in the US space program to produce electrical energy and water onboard spacecraft. These fuel cells use a solution of potassium hydroxide in water as the electrolyte and can use a variety of non-precious metals as a catalyst at the anode and cathode. High-temperature AFCs operate at temperatures between 100°C and 250°C. However, more-recent AFC designs operate at lower temperatures of roughly 23°C to 70°C. 

Fuel cells can be broadly classified into two types high temperature fuel cells such as molten carbonate fuel cells (MCFCs) and solid oxide polymer fuel cells (SOFCs), which operate at temperatures above 923 K and low temperature fuel cells such as proton exchange membrane fuel cells (PEMs), alkaline fuel cells (AFCs) and phosphoric acid fuel cells (PAFCs), which operate at temperatures lower than 523 K. Because of their higher operating temperatures, MCFCs and SOFCs have a high tolerance for commonly encountered impurities such as CO and CO2 (CO c)- However, the high temperatures also impose problems in their maintenance and operation and thus, increase the difficulty in their effective utilization in vehicular and small-scale applications. Hence, a major part of the research has been directed towards low temperature fuel cells. The low temperature fuel cells unfortunately, have a very low tolerance for impurities such as CO , PAFCs can tolerate up to 2% CO, PEMs only a few ppm, whereas the AFCs have a stringent (ppm level) CO2 tolerance. 

In alkaline fuel cells (AFCs), the electrolyte is 34-46% KOH, immobilized on a porous support, and the operating temperature is 60-120 °C. Because the environment is alkaline, Raney nickel (a finely divided form of nickel) can be used in place of expensive platinum. However, the alkali will be neutralized by any CO2 in the hydrogen fuel, so AFCs are not suitable for operation with reformed hydrocarbons but can be fueled with alcohols or hydrazine. AFCs were used successfully on the Apollo space missions. 

One of the first fuel cell designs was low-temperature alkaline fuel cells (AFCs) used in the U.S. space program. They served to produce both water and electricity on the spacecraft. Some of their disadvantages are that they are subject to carbon monoxide poisoning, are expensive, and have short operating lives. The AFC electrodes are made of porous carbon plates laced with a catalyst. The electrolyte is potassium hydroxide. At the cathode, oxygen forms hydroxide ions, which are recycled back to the anode. At the anode, hydrogen gas combines with the hydroxide ions to produce water vapor and electrons that are forced out of the anode to produce electric current. 

Fig. 13.17. Performance of advanced lightweight pressurized alkaline fuel cells. The dashed lines show initial advanced AFC cell results. A, 149 °C, 17 bar B, 140 °C, 17 bar C, 127 °C, 17 bar D, 110 °C, 4 bar E, 82°C, 4 bar F, 82 °C, 1 bar G, 0.2 MgPt-C and the same conditions as F (IR-free) H, 10 mg/cm2 Au/Pt, 127 °C, 1 bar (IR-free). , nominal performance of space shuttle cell (1000 h) , United Technologies target goal (1000 hr). Solid lines show solid polymer electrolyte cells for comparison under different pressure and temperature conditions. (Reprinted from Assessment of Research Needs for Advanced Fuel Cells, S. S. Penner, ed., Pergamon Press, 1986, pp. 14,87.)...

Alkaline fuel cells (AFC), with concentrated KOH (in asbestos matrices) electrolyte, conduct OH -anions, generated at an 02/H20 exposed cathode to electro-oxidize H2 (fuel) at the anode at moderate temperatures, and... 

Alkaline fuel cells (AFC) — The first practical -+fuel cell (FC) was introduced by -> Bacon [i]. This was an alkaline fuel cell using a nickel anode, a nickel oxide cathode, and an alkaline aqueous electrolyte solution. The alkaline fuel cell (AFC) is classified among the low-temperature FCs. As such, it is advantageous over the protonic fuel cells, namely the -> polymer-electrolyte-membrane fuel cells (PEM) and the - phosphoric acid fuel cells, which require a large amount of platinum, making them too expensive. The fast oxygen reduction kinetics and the non-platinum cathode catalyst make the alkaline cell attractive. 

Several types of fuel cells have been developed and are classified according to the electrolytes used alkaline fuel cells, molten carbonate fuel cells, phosphoric acid fuel cells (PAFCs), PEMFCs, and solid oxide fuel cells (SOFCs). As shown in Figure 1.3, the optimum operation temperatures of these fuel cells are different, and each type has different advantages and disadvantages. 

In this book the focus is on PEMFCs therefore, in the following sections we will only discuss several major types of PEMFCs, such as H2/air (02) fuel cells, direct liquid fuel cells, PAFCs, and alkaline fuel cells. PEMFCs, also called solid polymer electrolyte fuel cells, use a polymer electrolyte membrane as the electrolyte. They are low-temperature fuel cells, generally operating below 300°C. 

Alkaline fuel cells (AFCs) were the first type of fuel cell to be widely used in space exploration applications-for example, in NASA s Apollo and space shuttle flights. Figure 1.8 shows a schematic of an AFC stmcture. AFCs use H2 and 02 as fuel and oxidant, respectively. The electrolyte is a concentrated KOH solution absorbed into an asbestos matrix. The temperature for AFCs ranges from 100-250°C and the efficiency can be > 60%. OH ions are transported through the electrolyte from cathode to anode. The reactions are as follows ... 

---