Alkali, reactions alkaline

Chemical Properties. In addition to the reactions Hsted in Table 3, boron trifluoride reacts with alkali or alkaline-earth metal oxides, as well as other inorganic alkaline materials, at 450°C to yield the trimer trifluoroboroxine [13703-95-2] (BOF), MBF, and MF (29) where M is a univalent metal ion. The trimer is stable below — 135°C but disproportionates to B2O2 and BF at higher temperatures (30). 

The use of alkali or alkaline-earth sulfides cataly2es the reaction so that it is complete in a few hours at 150—160°C use of aluminum chloride as the catalyst gives a comparable reaction rate at 115°C. When an excess of sulfur is used, the product can be distilled out of the reactor, and the residue of sulfur forms part of the charge in the following batch reaction. The reaction is carried out in a stainless steel autoclave, and the yield is better than 98% based on either reactant. Phosphoms sulfochloride is used primarily in the manufacture of insecticides (53—55), such as Parathion. 

Explosive reactions can occur between oxygen and a wide range of chemicals including organic compounds (such as acetone, acetylene, secondary alcohols, hydrocarbons), alkali and alkaline earth metals, ammonia, biological specimens previously anaesthetized with ether, hydrogen and foam rubber. 

Phosphides are binary compounds containing anionic phosphorus (P ). Heavy metal, alkali, and alkaline earth metal phosphides exist but few of them are commercially important. Phosphides hydrolyze to the flammable and toxic gas phosphine (PH3). The hydrolysis reaction of aluminum phosphide is given below ... 

The addition of various alkali and alkaline earth cations to the cyclooligomerization of ethylene oxide by Dale and Daasvatn also provides strong presumptive evidence for the template effect. Recently, Reinhoudt, de Jong and Tomassen utilized several metal fluorides to effect crown formations . The reaction rates were found to be in the order Cs > Rb > > Na LE. Such an order would be expected on the basis of binding... 

The in-out bicyclic amines prepared by Simmons and Park bear a remarkable semblance to the cryptands but lack the binding sites in the bridges. As a result, these molecules interact with electrophiles in a fashion similar to other tertiary amines and generally do not exhibit strong interactions with alkali or alkaline earth metal ions. The in-out bicyclic amines are prepared by reaction of the appropriate acid chlorides and amines in two stages to yield the macrobicyclic amine after reduction of the amidic linkages. A typical amine is shown above as compound 18. 

Hydrogen can be prepared by the reaction of water or dilute acids on electropositive metals such as the alkali metals, alkaline earth metals, the metals of Groups 3, 4 and the lanthanoids. The reaction can be explosively violent. Convenient laboratory methods employ sodium amalgam or calcium with water, or zinc with hydrochloric acid. The reaction of aluminium or ferrosilicon with aqueous sodium hydroxide has also been used. For small-scale preparations the hydrolysis of metal hydrides is convenient, and this generates twice the amount of hydrogen as contained in the hydride, e.g. ... 

Reaction of Na2Se and Na2Sc2 with Se in the presence of ethanolic solutions of tetraalkyl-ammonium halides and catalytic amounts of I2 yields dark green or black crystalline polyselenides (jc = 3,5-9) depending on the conditions used and the particular cation selected. Tetraphenylphosphonium salts and crown ether complexes of alkali or alkaline earth cations in dimethylformamide solution can also be used. " )... 

Using tables of free energies of formation it is clear that most metals will react with most HX. Moreover, in many cases, e.g. with the alkali metals, alkaline earth metals, Zn, A1 and the lanthanide elements, such reactions are extremely exothermic. It is also clear that Ag should react with HCl, HBr and HI but not with HF, and... 

Section 20.1 deals with the processes by which these metals are obtained from their principal ores. Section 20.2 describes the reactions of the alkali and alkaline earth metals, particularly those with hydrogen, oxygen, and water. Section 20.3 considers the redox chemistry of the transition metals, their cations (e.g., Fe2+, Fe3+), and their oxoanions (e.g., Cr042-). ... 

I Table 20.1 Reactions of the Alkali and Alkaline Earth Metals ... 

The compounds formed by the reaction of hydrogen with the alkali and alkaline earth metals contain H- ions for example, sodium hydride consists of Na+ and H- ions. These white crystalline solids are often referred to as saline hydrides because of their physical resemblance to NaCL Chemically, they behave quite differently from sodium chloride for example, they react with water to produce hydrogen gas. Typical reactions are... 

Alkali and alkaline-earth metals have the most negative standard reduction potentials these potentials are (at least in ammonia, amines, and ethers) more negative than that of the solvated-electron electrode. As a result, alkali metals (M) dissolve in these highly purified solvents [9, 12] following reactions (1) and (2) to give the well-known blue solutions of solvated electrons. 

Selectivity to primary metathesis products is usually less than 100%, as a consequence of side reactions, such as double-bond migration, dimerization, oligomerization, and polymerization. The selectivity can be improved by adding small amounts of alkali or alkaline earth metal ions, or, as has recently been shown, thallium 40), copper, or silver ions (41)-... 

Foreign cations can increasingly lower the yield in the order Fe, Co " < Ca " < Mn < Pb " [22]. This is possibly due to the formation of oxide layers at the anode [42], Alkali and alkaline earth metal ions, alkylammonium ions and also zinc or nickel cations do not effect the Kolbe reaction [40] and are therefore the counterions of choice in preparative applications. Methanol is the best suited solvent for Kolbe electrolysis [7, 43]. Its oxidation is extensively inhibited by the formation of the carboxylate layer. The following electrolytes with methanol as solvent have been used MeOH-sodium carboxylate [44], MeOH—MeONa [45, 46], MeOH—NaOH [47], MeOH—EtsN-pyridine [48]. The yield of the Kolbe dimer decreases in media that contain more than 4% water. 

Salt-inclusion solids described herein were synthesized at high temperature (>500°C) in the presence of reactive alkali and alkaline-earth metal halide salt media. For single crystal growth, an extra amount of molten salt is used, typically 3 5 times by weight of oxides. The reaction mixtures were placed in a carbon-coated silica ampoule, which was then sealed under vacuum. The reaction temperature was typically set at 100-150 °C above the melting point of employed salt. As shown in the schematic drawing in Fig. 16.2, the corresponding metal oxides were first dissolved conceivably via decomposition because of cor-... 

Low-temperature solvents are not readily available for many refractory compounds and semiconductors of interest. Molten salt electrolysis is utilized in many instances, as for the synthesis and deposition of elemental materials such as Al, Si, and also a wide variety of binary and ternary compounds such as borides, carbides, silicides, phosphides, arsenides, and sulfides, and the semiconductors SiC, GaAs, and GaP and InP [16], A few available reports regarding the metal chalcogenides examined in this chapter will be addressed in the respective sections. Let us note here that halide fluxes provide a good reaction medium for the crystal growth of refractory compounds. A wide spectrum of alkali and alkaline earth halides provides... 

Most metals (other than the alkali and alkaline-earth metals) are corrosion resistant when cathodically polarized to the potentials of hydrogen evolution, so that this reaction can be realized at many of them. It has thus been the subject of innumerable studies, and became the fundamental model in the development of current kinetic concepts for electrochemical reactions. Many of the principles... 

That eh is the intermediate species and not the H atom has been verified by adding NzO and methanol to water then, N2, not H2, is the principal product. Alkali and alkaline earth metals above Na in the electrochemical series will also generate eh on dissolution in water. Moreover the H/D isotope effect in water containing 50% D is consistent with the reaction 2eh—H2 + 20H (Anbar and Meyerstein, 1966 Hart and Anbar, 1970). 

As well as an acid-independent pathway, an acid-dependent pathway also occurs for the dissociation of a number of the alkali and alkaline earth metal cryptates (Table 7.1). Similar behaviour to that just discussed for methanol also occurs for reactions in a range of other non-aqueous solvents (Cox, Truong Schneider, 1984). 

Determination of trace metals in seawater represents one of the most challenging tasks in chemical analysis because the parts per billion (ppb) or sub-ppb levels of analyte are very susceptible to matrix interference from alkali or alkaline-earth metals and their associated counterions. For instance, the alkali metals tend to affect the atomisation and the ionisation equilibrium process in atomic spectroscopy, and the associated counterions such as the chloride ions might be preferentially adsorbed onto the electrode surface to give some undesirable electrochemical side reactions in voltammetric analysis. Thus, most current methods for seawater analysis employ some kind of analyte preconcentration along with matrix rejection techniques. These preconcentration techniques include coprecipitation, solvent extraction, column adsorption, electrodeposition, and Donnan dialysis. 

---