Titanium enolates aldol reaction

As the t-butyl group can readily be removed upon acidic or basic hydrolysis, this method can also be used for //-hydroxyl acid synthesis. In analogy with allylation reactions, the enolate added preferentially to the Re-face of the aldehydes in aldol reactions. Titanium enolate 66 tolerates elevated temperatures, while the enantioselectivity of the reaction is almost temperature independent. The reaction can be carried out even at room temperature without significant loss of stereoselectivity. We can thus conclude that this reaction has the following notable advantages High enantiomeric excess can be obtained (ee > 90%) the reaction can be carried out at relatively high temperature the chiral auxiliary is readily available and the chiral auxiliary can easily be recovered.44... 

In the Evans synthesis of the polypropionate region (Scheme 9-45), the boron-mediated anti aldol reaction of -ketoimide ent-25 with a-chiral aldehyde 145 afforded 146 with 97% ds in what is expected to be a matched addition. Adduct 146 was then converted into aldehyde 147 in readiness for union with the C -Cs ketone. This coupling was achieved using the titanium-mediated syn aldol reaction of enolate 148 leading to the formation of 149 with 97% ds. 

The complex (A,A)-(ebthi)TiCl(OMe) has been synthesized from the corresponding titanium dichloride. This compound catalyzes the asymmetric aldol reaction of enol trichloroacetate of cyclohexanone with aromatic aldehydes with the result that the optically active syn-aldol adduct is obtained with up to 91% ee.1664... 

Stereoselectivities of 99% are also obtained by Mukaiyama type aldol reactions (cf. p. 58) of the titanium enolate of Masamune s chired a-silyloxy ketone with aldehydes. An excess of titanium reagent (s 2 mol) must be used to prevent interference by the lithium salt formed, when the titanium enolate is generated via the lithium enolate (C. Siegel, 1989). The mechanism and the stereochemistry are the same as with the boron enolate. 

Titanium enolates can be prepared from lithium enolates by reaction withatrialkoxy-titanium(IV)chloride,suchasfra-(isopropoxy)titaniumchloride.21 Titanium enolates are usually prepared directly from ketones by reaction with TiCl4 and a tertiary amine.22 Under these conditions, the Z-enolate is formed and the aldol adducts have syn stereochemistry. The addition step proceeds through a cyclic TS assembled around titanium. 

The enolates of other carbonyl compounds can be used in mixed aldol reactions. Extensive use has been made of the enolates of esters, thiol esters, amides, and imides, including several that serve as chiral auxiliaries. The methods for formation of these enolates are similar to those for ketones. Lithium, boron, titanium, and tin derivatives have all been widely used. The silyl ethers of ester enolates, which are called silyl ketene acetals, show reactivity that is analogous to silyl enol ethers and are covalent equivalents of ester enolates. The silyl thioketene acetal derivatives of thiol esters are also useful. The reactions of these enolate equivalents are discussed in Section 2.1.4. 

These examples and those in Scheme 2.6 illustrate the key variables that determine the stereochemical outcome of aldol addition reactions using chiral auxiliaries. The first element that has to be taken into account is the configuration of the ring system that is used to establish steric differentiation. Then the nature of the TS, whether it is acyclic, cyclic, or chelated must be considered. Generally for boron enolates, reaction proceeds through a cyclic but nonchelated TS. With boron enolates, excess Lewis acid can favor an acyclic TS by coordination with the carbonyl electrophile. Titanium enolates appear to be somewhat variable but can be shifted to chelated TSs by use of excess reagent and by auxiliaries such as oxazolidine-2-thiones that enhance the tendency to chelation. Ultimately, all of the factors play a role in determining which TS is favored. 

As is the case for aldol addition, chiral auxiliaries and catalysts can be used to control stereoselectivity in conjugate addition reactions. Oxazolidinone chiral auxiliaries have been used in both the nucleophilic and electrophilic components under Lewis acid-catalyzed conditions. (V-Acyloxazolidinones can be converted to nucleophilic titanium enolates with TiCl3(0-/-Pr).320... 

The stereoselective addition of the titanium enolate of A-acetyl-4-phenyl-l,3-thiazolidine-2-thione 153 to the cyclic A-acyl iminium ion 154 is utilized in the synthesis of (-)-stemoamide, a tricyclic alkaloid <06JOC3287>. The iminium ion addition product 155 undergoes magnesium bromide-catalyzed awtz-aldol reaction with cinnamaldehyde 156 to give adduct 157, which possesses the required stereochemistry of all chiral centers for the synthesis of (-)-stemoamide. 

Titanium enolates54 are widely used in aldol reactions and this research area has been reviewed until 2003.55 Thus, examples described in this chapter cover the literature since 2003. Recently, Mikami and co-workers reported the direct generation of titanium enolate 68 of an a-trifluoromethyl ketone56 for a high-yielding and zz /z -diastereose-lective aldol reaction (Scheme 25).57 The aldol reaction proceeded more smoothly if titanium(rv) isopropoxide was added as Lewis acid. On the other hand, low yield and moderate //-selectivity were obtained if HMPA was used instead of the titanium(rv) Lewis acid. 

Several other examples of zz/z/z -diastereoselectivc aldol reactions with titanium enolates and carbonyl electrophiles have been reported in the literature.58-65... 

A jy -diastereoselective aldol reaction based on titanium enolates from (A)-l-benzyloxy-2-methyl-3-pentanone was developed by Solsona et al. (Equation (12)).64 The titanium enolate of this chiral ketone afforded the corresponding syn-syn aldol adducts in high yields and diastereomeric ratios with a broad range of aldehydes. 

Various other examples of, sy -diastereoselective 60-67 or non-selective aldol reactions of titanium enolates with carbonyl electrophiles have been described.68... 

Finally, several diastereoselective aldol reactions using titanium enolates and carbonyl electrophiles have also been applied to the total synthesis of natural products.69-72... 

Recent developments of aldol-type reactions with titanium enolates include the a- and /3-C-glycosidation of glycals73 and the diastereoselective addition to 2-acetoxytetrahydrofurans.74 Mukaiyama and co-workers have developed a one-pot procedure for the preparation of unsymmetrical double aldols.75... 

Covalently bonded chiral auxiliaries readily induce high stereoselectivity for propionate enolates, while the case of acetate enolates has proved to be difficult. Alkylation of carbonyl compound with a novel cyclopentadienyl titanium carbohydrate complex has been found to give high stereoselectivity,44 and a variety of ft-hydroxyl carboxylic acids are accessible with 90-95% optical yields. This compound was also tested in enantioselective aldol reactions. Transmetalation of the relatively stable lithium enolate of t-butyl acetate with chloro(cyclopentadienyl)-bis(l,2 5,6-di-<9-isopropylidene-a-D-glucofuranose-3-0-yl)titanate provided the titanium enolate 66. Reaction of 66 with aldehydes gave -hydroxy esters in high ee (Scheme 3-23). 

Reactions of titanocene-methylidene generated from titanacyclobutanes with acyl chlorides 55 [46] or acid anhydrides 56 [47] lead initially to the titanium enolates 57 (Scheme 14.24), which then afford aldols upon treatment with the carbonyl compounds. On the other hand, five-membered cyclic anhydrides are methylenated with dimethyltitanocene (Table 14.5, entry 7) [45]. 

The Diels-Alder reaction outlined above is a typical example of the utilization of axially chiral allenes, accessible through 1,6-addition or other methods, to generate selectively new stereogenic centers. This transfer of chirality is also possible via in-termolecular Diels-Alder reactions of vinylallenes [57], aldol reactions of allenyl eno-lates [19f] and Ireland-Claisen rearrangements of silyl allenylketene acetals [58]. Furthermore, it has been utilized recently in the diastereoselective oxidation of titanium allenyl enolates (formed by deprotonation of /3-allenecarboxylates of type 65 and transmetalation with titanocene dichloride) with dimethyl dioxirane (DMDO) [25, 59] and in subsequent acid- or gold-catalyzed cycloisomerization reactions of a-hydroxyallenes into 2,5-dihydrofurans (cf. Chapter 15) [25, 59, 60],... 

In the titanium tetrachloride-promoted aldol condensations of stereochemically defined enolsilanes (eq. [58]) variable levels of aldol diastereoselection have been noted (Table 26) (73). A detailed analysis of this reaction in terms of probable intermediates and transition state awaits further studies however, some experimental observations suggest that titanium enolates may not be involved (73b). 

An exceptionally mild procedure for the cross-condensation of aldimines and enolsilanes has been described (eq. [67]) (80). This titanium tetrachloride-mediated reaction is predicated on the previous analogies provided by Mukaiyama for related aldol condensations (73a). Depending on aldimine structure and reaction time, either -lactams or their penultimate amino esters may be isolated from the reaction. The authors postulate that these reactions are proceeding via titanium enolates derived from ligand exchange by... 

Although in the recent years the stereochemical control of aldol condensations has reached a level of efficiency which allows enantioselective syntheses of very complex compounds containing many asymmetric centres, the situation is still far from what one would consider "ideal". In the first place, the requirement of a substituent at the a-position of the enolate in order to achieve good stereoselection is a limitation which, however, can be overcome by using temporary bulky groups (such as alkylthio ethers, for instance). On the other hand, the ( )-enolates, which are necessary for the preparation of 2,3-anti aldols, are not so easily prepared as the (Z)-enolates and furthermore, they do not show selectivities as good as in the case of the (Z)-enolates. Finally, although elements other than boron -such as zirconium [30] and titanium [31]- have been also used succesfully much work remains to be done in the area of catalysis. In this context, the work of Mukaiyama and Kobayashi [32a,b,c] on asymmetric aldol reactions of silyl enol ethers with aldehydes promoted by tributyltin fluoride and a chiral diamine coordinated to tin(II) triflate... 

This dual behaviour must allow control of the configuration at the a carbon atom in an aldol reaction, provided that one can control whether or not the metal is chelated at the time the aldol condensation occurs. Thornton and Nerz-Stormes [35] reported an approach to this problem by using titanium enolates to obtain "non-Evans" 5jn-aldols. On the other hand, Heathcock and his associated found that aldehydes react with chelated boron enolates 100b to afford the anh-aldols 102 or the "non-Evans" i yn-aldols 103 depending upon the reaction conditions (Scheme 9.32). 

Several methods for the anti-selective, asymmetric aldol reaction recorded in the literature include (i) the use of boron, titanium, or tin(ll) enolate carrying chiral ligands, (ii) Lewis acid-catalyzed aldol reactions of a metal enolate of chiral carbonyl compounds, and (iii) the use of the metal enolate derived from a chiral carbonyl compound. Although many of these methods provide anti-aldols with high enantioselectivities, these methods are not as convenient or widely applicable as the method reported here, because of problems associated with the availability of reagents, the generality of reactions, or the required reaction conditions. 

The nonracemic 2/7-1,3-benzoxazin-4(3//)-one 202 was successfully applied as a chiral auxiliary in asymmetric transformations the titanium enolate-mediated aldol reactions of its A-acyl derivatives provided the products in high yields and with excellent diastereoselectivity <1996SL455, 1996TL5565>. 

Other examples of the uses of enolate derivatives of thioesters for highly diastereoselecave aldol reactions were reported by Gennari [373] and Hanaoka et al. [374. 375]. The latter reported the reaction between a chromium-complexed benzaldehyde (1) and the titanium enolate of a thioester (2) as the first step of sequences directed towards the synthesis of (+)-goniofufurone [374] and the taxol C13 side-chain [375]. They also used cobalt-complexed acetylenic aldehydes for the selective formation of syn-aldols [376]. 

---