Solvent free adhesives

Reactive Polyurethane Hot-Melt Adhesives (Solvent-Free)... 

Adhesives and sealants are manufactured from a variety of polymers. Their selection and their combinations used impact solvent selection. Most solvent systems are designed to optimize the solubility of the primary polymer. Adhesives can be divided into ones which bond by chemical reaction and ones which bond due to physical processes. Chemically reactive adhesives are further divided into three more categories for those that bond through polymerization, polyaddition, or polycondensation. Physically bonding adhesives include pressure sensitive and contact adhesives, melt, or solution adhesives, and plastisols. Polymerization adhesives are composed of cyanoacrylates (no solvents), anaerobic adhesives (do not contain solvents but require primers for plastics and some metals which are solutions of copper naphthenate), UV-curable adhesives (solvent-free compositions of polyurethanes and epoxy), rubber modified adhesives (variety solvents discussed below). 

Water-based dispersions or emulsions such as polyvinyl acetate, acrylics, polyvinyl chloride and polyvinyl alcohol with plasticizers and tackifiers. In addition, this range can include urea formaldehyde and phenolic adhesives, resins, natural adhesives produced from starch, dextrin, casein, animal glues (see Polyvinyl alcohol in adhesives, Phenolic adhesives single-stage resoles. Phenolic adhesives two-stage novolacs. Animal glues and technical gelatins) and rubber latex (see Emulsion and dispersion adhesives). Solvent-free 100% solids such as polyurethane. Hot melt adhesives include Ethylene-vinyl acetate copolymers, polyolefins, polyamides, polyesters with tackifiers and waxes. More recent additions include cross-linkable systems. 

Manufacturers Comments Natural resin dispersion adhesive, solvent free. Water-based acrylic dispersion. Flexible with good initial tack. 

Manufacturers Comments Elastic structural adhesive. Solvent-free. Manufacturers Comments Low melt temperature. Very high tack. ... 

Electron beam-initiated modification of polymers is a relatively new technique with certain advantages over conventional processes. Absence of catalyst residue, complete control of the temperature, a solvent-free system, and a source of an enormous amount of radicals and ions are some of the reasons why this technique has gained commercial importance in recent years. The modification of polyethylene (PE) for heat-shrinkable products using this technique has been recently reported [30,31]. Such modification is expected to alter the surface properties of PE and lead to improved adhesion and dyeability. 

Report 101 Solvent-Free Adhesives, T.E. Rolando, H.B. Fuller Company. 

A different approach, although stdl working with essentially non-fiinctional polymers has been exemplified [114,115], in which, a 100% solid (solvent free) hot melt has been irradiated to produce pressure-sensitive adhesives with substantially improved adhesive properties. Acrylic polymers, vinyl acetate copolymers with small amounts of A,A -dimethylaminoethyl methacrylate, diacetone acrylamide, A-vinyl pyrrohdone (NVP) or A A have been used in this study. Polyfunctional acrylates, such as trimethylolpropane trimethacrylate (TMPTMA) and thermal stabilizers can also be used. 

Cationic photopolymerizations of epoxides and vinyl ethers offer tremendous potential in the area of high-speed, solvent-free curing of films and coatings. The polymers formed exhibit excellent clarity, adhesion, abrasion, and chemical... 

Traditionally, UV curable polymers have been utilized as coatings for wood and vinyl floors, but their applications have increased dramatically over the last twenty years to encompass many diverse areas, including optical fiber coatings (7), adhesives (2), disc replications (3-5), and microelectronics (6). This widespread use of UV cross-linked systems is attributed to their rapid, energy efficient curing and their solvent free, one piece formulations. Typically, UV curable systems require only a small fraction of the power normally utilized in thermally cured systems and their solvent free nature offers an environmentally safer alternative. 

Loop A continuous process for polymerizing aqueous emulsions of olefinic compounds such as vinyl acetate. Polymerization takes place in a tubular reactor (the loop) with recycle. Invented by Gulf Oil Canada in 1971 and further developed by several United Kingdom paint companies. It is now used for making copolymers of vinyl acetate with ethylene, used in solvent-free paints and adhesives. 

Recently a solvent-free dual-cure laminating adhesive based on the combination of polyurethane chemistry and EB cure was developed that exhibits improved properties compared to laminates prepared by either method alone. ... 

Adhesives - Short term method for measuring the emissions properties of low-solvent or solvent-free adhesives after application. Part 1 General procedure. 

Adhesives on the basis of a rubber are applied as watery dispersions, as solvents, or as solvent-free fluids. Sometimes the rubber is vulcanised after the gluing process, sometimes it remains uncured. Polymers often used are butyl rubber, polyisobutylene, and polychloroprene. A more recent development is the use of... 

Single-component epoxy adhesive formulations are the largest type of epoxy adhesives sold, with about 55 percent of the consumption, while two-component formulations account for another 44 percent of the volume. Radiation cure formulations represent the remainder of the market. Epoxy adhesives can also take many forms including solids, solvent-free liquids, solvent-borne systems, and waterborne systems. 

Radiation curing adhesives are generally applied as solvent-free liquids. High-solids EB and uv curing liquid adhesives have been formulated from a variety of resins and elastomers. They include epoxy acrylates, epoxies, other acrylates, polyesters, blends of acrylate monomers with elastomers, and other compositions. 

Solvent-free epoxy (spray or trowel) 100 500-625 2 h 6h High resistance against tidal and impact actions, good oil and water resistance, good adhesion to many surfaces... 

Water-based decorative wall paint Low-viscosity solvent-free epoxy sealer 42 100 38 15 min 2 h 16 h Flat, decorative finish on walls and ceilings, for interior and exterior use Excellent penetrating sealer and adhesion promoter for concrete and prior to application of coatings, excellent chemical resistance... 

---