Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Acylation maleic anhydride

After acyl halides acid anhydrides are the most reactive carboxylic acid derivatives Three of them acetic anhydride phthahc anhydride and maleic anhydride are mdus trial chemicals and are encountered far more often than others Phthahc anhydride and maleic anhydride have their anhydride function incorporated into a nng and are referred to as cyclic anhydrides... [Pg.841]

Section 20 5 Acid anhydrides may be prepared from acyl chlorides m the laboratory but the most commonly encountered ones (acetic anhydride phthahc anhydride and maleic anhydride) are industrial chemicals prepared by specialized methods... [Pg.875]

Acylation. In chlorinated solvents, maleic anhydride reacts with aromatic hydrocarbons (ArH) in the presence of aluminum chloride... [Pg.449]

Another important use of BCl is as a Ftiedel-Crafts catalyst ia various polymerisation, alkylation, and acylation reactions, and ia other organic syntheses (see Friedel-Crafts reaction). Examples include conversion of cyclophosphasenes to polymers (81,82) polymerisation of olefins such as ethylene (75,83—88) graft polymerisation of vinyl chloride and isobutylene (89) stereospecific polymerisation of propylene (90) copolymerisation of isobutylene and styrene (91,92), and other unsaturated aromatics with maleic anhydride (93) polymerisation of norhornene (94), butadiene (95) preparation of electrically conducting epoxy resins (96), and polymers containing B and N (97) and selective demethylation of methoxy groups ortho to OH groups (98). [Pg.224]

An interesting application of this reaction was the use of macro-molecular anhydrides, namely, styrene-maleic anhydride or vinyl acetate-maleic anhydride copolymers in the presence of perchloric acid as catalyst, these copolymers acylate mesityl oxide or d rpnone to macromolecular pyrylium salts which, with aryl substituents, are fluorescent.No crystalline products could be obtained from succinic anhydride because of the solubility and ease of decarboxylation. [Pg.285]

D. Acylation Reaction of Polystyrene with Maleic Anhydride and Acetic Anhydride... [Pg.266]

In order to extend the scope of the reaction, and with the aim of designing a greener approach to the above set of reactions, we preformed the acylation of the same substrates with different acylation agents, such as maleic anhydride, p-methoxybenzoic acid and acetic acid (Scheme 48.4). Table 48.3 shows the results for acylation of benzenesulfonamide. [Pg.431]

Similarly, proximate-parallel bishydrazine 442 can be transferred to 443 by direct acylation with maleic anhydride. Analogous derivative 445 can be obtained from the same starting compound by treatment with methyl 3,4-epoxy-butanoate to provide 444, followed by mesylation and elimination of the intermediate mesylate (Scheme 73) <2005EJ01311>. [Pg.430]

Modification of amines with maleic anhydride is done essentially the same as that described for succinic anhydride (this section, Part A), except the pH of the reaction should be kept alkaline (pH 8-9) at all times to prevent unwanted de-acylation. Deblocking of maleylated amines can be accomplished according to the following procedure of Butler et al. (1967). [Pg.107]

Citraconic anhydride (or 2-methylmaleic anhydride) is a derivative of maleic anhydride that is even more reversible after acylation than maleylated compounds. At alkaline pH values (pH 7-8) the reagent effectively reacts with amine groups to form amide linkages and a terminal carboxylate. However, at acid pH (3-4), these bonds rapidly hydrolyze to release citraconic acid and free the amine (Figure 1.86) (Dixon and Perham, 1968 Habeeb and Atassi, 1970 Klapper and Klotz, 1972 Shetty and Kinsella, 1980). Thus, citraconic anhydride has been used to temporarily block amine groups while other parts of a molecule are undergoing derivatization. Once the modification is complete, the amines then can be unblocked to create the original structure. [Pg.108]

Maleic acid is a linear four carbon molecule with carboxylate groups on both ends and a double bond between the central carbon atoms. The anhydride of maleic acid is a cyclic molecule containing five atoms. Although the reactivity of maleic anhydride is similar to other cyclic anhydrides, the products of maleylation are much more unstable toward hydrolysis, and the site of unsaturation lends itself to additional side reactions. Acylation products of amino groups with maleic anhydride are stable at neutral pH and above, but they readily hydrolyze at acid pH values around pH 3.5 (Butler et al., 1967). Maleylation of sulfhydryls and the phe-nolate of tyrosine are even more sensitive to hydrolysis. Thus, maleic anhydride is an excellent reversible blocker of amino groups to temporarily mask them from reactivity while another... [Pg.159]

Nishino, Y., Nakao, T., Tanaka, C. and Takahashi, A. (1991). Acylation of hinoki wood by maleic anhydride and the dynamic properties. Bulletin of the Faculty of Agriculture Shimane University, 25, 161-164. [Pg.219]

The diacylation of isopropenyl acetate with anhydrides of dicarboxylic acids is applicable for the synthesis of several other cyclic jS-triketones in moderate yield. - It has been used for the synthesis of 2-acetylcyclohexane-l,3-dione (40% yield), 2-acetyl-4-methylcyclopentane-l,3-dione (10% yield), 2-acetyl-4,4-dimethylcyclopentane-l,3-dione (10% yield), 2-acetyl-5,5-dimethylcyclohexane-l,3-dione (10% yield), 2-acetylcyclo-heptane-l,3-dione (12% yield) and 2-acetylindane-l,3-dione (26% yield). Maleic anhydrides under more drastic conditions give acetylcyclopent-4-ene-l,3-diones in yields from 5% to 12%. The corresponding acylation of the enol acetate of 2-butanone with succinic anhydride has been used to prepare 2-methylcyclopentane-l,3-dione, an important intermediate in steroid synthesis. - ... [Pg.3]

Chan and co-workers (73) generated the novel mtinchnone-sydnone hybrids 127-128 by cyclodehydration of the sydnone glycine (125) and alanine (126), respectively. Trapping with DMAD gave 129 and 130. Maleic anhydride and dimethyl maleate failed to capture these mtinchnone-sydnone hybrids. Exposure of 125 to trifluoroacetic anhydride gave acylated mtinchnone 131 [by nuclear magnetic resonance (NMR)]. Workup afforded the hydrolysis product 132 (Scheme 10.24). [Pg.703]

Usually, one would expect that an acrylate ester would be prepared by the acylation of an alcohol with acryloyl chloride. Jonathan M.J. Williams of the University of Bath reports (Tetrahedron Lett. 44 5523,2003) that this acylation can also be effected with the mild combination of Ph,P and maleic anhydride. The acrylate esters so prepared are interesting as polymerization precursors, and as Diels-Alder dienophiles. The allylic acrylates invite tandem conjugate addition / Ireland Claisen rearrangement. [Pg.18]


See other pages where Acylation maleic anhydride is mentioned: [Pg.35]    [Pg.35]    [Pg.35]    [Pg.551]    [Pg.151]    [Pg.303]    [Pg.427]    [Pg.430]    [Pg.13]    [Pg.107]    [Pg.107]    [Pg.157]    [Pg.159]    [Pg.555]    [Pg.15]    [Pg.33]    [Pg.36]    [Pg.271]    [Pg.548]    [Pg.335]    [Pg.319]    [Pg.89]    [Pg.528]    [Pg.912]    [Pg.516]    [Pg.115]   
See also in sourсe #XX -- [ Pg.107 ]

See also in sourсe #XX -- [ Pg.94 ]

See also in sourсe #XX -- [ Pg.94 ]




SEARCH



Acylation anhydrides

Anhydrides maleic anhydride

Maleic anhydride

© 2024 chempedia.info