Activations phenols, pyridine

Pyridine-catalyzed acylation of phenols using benzoyl chloride and benzoyl bromide was reported . Acylation of phenols using acetyl chloride or benzoyl chloride can be achieved using triflic acid as the catalyst in nonpolar solvents snch as methylene chloride. The role of pyridine in these reactions seems to be the intermittent formation of the benzoylpyrimidinium ions as the reactive species. The activated phenolic componnds snch as resorcinol, on the other hand, could be acylated in near-supercritical water (250-300 °C) without using any external Lewis acid catalysts (equation 47) . The equilibrium conversions in water, however, are to the extent of about 4%. Running the same reactions in neat acetic acid causes a tenfold increase in yield. 

Activating Agent. Pyridine was found to promote the synthesis of aryl ethers starting from phenols via a 2,4,6-triphenylcyclotriboroxane-pyridine adduct (easily prepared by addition of pyridine to the corresponding 2,4,6-triphenylcyclotriboroxane). When 4-phenylphenol is reacted with 0.66 equiv of the above boroxane adduct in the presence of stoichiometric copper(II) acetate and cesium carbonate, the desired aryl ether is obtained in 99% isolated yield after 24 h at room temperature (eq 40). 

This reaction sequence is much less prone to difficulties with isomerizations since the pyridine-like carbons of dipyrromethenes do not add protons. Yields are often low, however, since the intermediates do not survive the high temperatures. The more reactive, faster but less reliable system is certainly provided by the dipyrromethanes, in which the reactivity of the pyrrole units is comparable to activated benzene derivatives such as phenol or aniline. The situation is comparable with that found in peptide synthesis where the slow azide method gives cleaner products than the fast DCC-promoted condensations (see p. 234). 

The raw material has to be washed to remove impurities. Diluted sodium hydroxide allows the removal of phenols and benzonitrile, and diluted sulphuric acid reacts with pyridine bases. The resulting material is distilled to concentrate the unsaturated compounds (raw feedstock for coumarone-indene resin production), and separate and recover interesting non-polymerizable compounds (naphthalene, benzene, toluene, xylenes). Once the unsaturated compounds are distilled, they are treated with small amounts of sulphuric acid to improve their colour activated carbons or clays can be also used. The resulting material is subjected to polymerization. It is important to avoid long storage time of the feedstock because oxidation processes can easily occur, affecting the polymerization reaction and the colour of the coumarone-indene resins. 

Thionyl chloride is another activating agent employed for reactions between aromatic carboxylic acids and phenols in pyridine solution. The mechanism suggested does not involve the formation of an acid chloride but assumes the existence of an intermediary mixed sulfinic anhydride which undergoes reaction with phenolic endgroups (Scheme 2.32).311... 

The Ullman reaction has long been known as a method for the synthesis of aromatic ethers by the reaction of a phenol with an aromatic halide in the presence of a copper compound as a catalyst. It is a variation on the nucleophilic substitution reaction since a phenolic salt reacts with the halide. Nonactivated aromatic halides can be used in the synthesis of poly(arylene edier)s, dius providing a way of obtaining structures not available by the conventional nucleophilic route. The ease of halogen displacement was found to be the reverse of that observed for activated nucleophilic substitution reaction, that is, I > Br > Cl F. The polymerizations are conducted in benzophenone with a cuprous chloride-pyridine complex as a catalyst. Bromine compounds are the favored reactants.53,124 127 Poly(arylene ether)s have been prepared by Ullman coupling of bisphenols and... 

The reaction between acyl halides and alcohols or phenols is the best general method for the preparation of carboxylic esters. It is believed to proceed by a 8 2 mechanism. As with 10-8, the mechanism can be S l or tetrahedral. Pyridine catalyzes the reaction by the nucleophilic catalysis route (see 10-9). The reaction is of wide scope, and many functional groups do not interfere. A base is frequently added to combine with the HX formed. When aqueous alkali is used, this is called the Schotten-Baumann procedure, but pyridine is also frequently used. Both R and R may be primary, secondary, or tertiary alkyl or aryl. Enolic esters can also be prepared by this method, though C-acylation competes in these cases. In difficult cases, especially with hindered acids or tertiary R, the alkoxide can be used instead of the alcohol. Activated alumina has also been used as a catalyst, for tertiary R. Thallium salts of phenols give very high yields of phenolic esters. Phase-transfer catalysis has been used for hindered phenols. Zinc has been used to couple... 

Polymeric adsorbents have also been found to be very useful, and even highly water-loving undesired materials like p-toluene sulphonic acid from waste streams can be recovered via ad.sorption and regeneration with solvents like fv -propanol. In such instances, the regeneration of activated carbons is not satisfactory, even with aqueous sodium hydroxide. Solutes like phenols, substituted phenols, aromatic amines, heterocyclic amines (pyridine, picolines, etc.) can be recovered, in a rewarding way, from aqueous solutions. 

The supported aqueous phase methodology was applied to the system Pd(OAc)2/5 TPPTS, a catalytic precursor for the Trost-Tsuji reaction. The characterization of the solid by 31P MAS NMR confirms the presence of Pd°(TPPTS)3 as the main surface species. The catalytic properties of the solid were tested for the allylic substitution of E-cinnamylethylcarbonate by different nucleophiles such as ethyl acetoacetate, dimethyl malonate, morpholine, phenol, and 2-mercapto-pyridine. The absence of palladium leaching was demonstrated, and having solved the problem of water leaching from the solid to the organic phase, the SAP-Pd catalyst was successfully recycled several times without loss in its activity. It was used in a continuous flow experiment which... 

Figure 3.6 Test for active silanols on octadecyl-bonded silica gels. Column 5 pm octadecyl-bonded silica gel, 15 cm x 4.6 mm i.d. eluent, 60% aqueous acetonitrile flow rate, 1ml min-1 temperature, ambient detection, UV 254 nm. Peak 1, pyridine 2, phenol, and 3, toluene. A, Column with no active silanol groups B, some active groups and C, numerous active groups.

Hill, C.A.S. and Papadopoulos, A.N. (2002). The pyridine-catalysed acylation of pine sapwood and phenolic model compounds with carboxylic acid anhydrides. Determination of activation energies and entropy of activation. Holzforschung, 56(2), 150-156. 

Nitration with tetranitromethane proceeds along the ion-radical ronte. Tetranitromethane is a smooth nitrating agent and mild oxidizer. It is convenient for nitration of highly activated snbstrates snch as phenols, azulene, and heterocycles in the presence of pyridine, N,iV-dialkylaniline, etc. As shown (Morkovnik 1988), these reactions inclnde one-electron transfer ... 

On co-adsorbing phenol and methanol, the protonation of methanol occurs on the active acid sites as the labile protons released from the phenol reacted with methanol. Thus protonated methanol became electrophilic methyl species, which undergo electrophilic substitution. The ortho position of phenol, which is close to the catalyst surface, has eventually become the substitution reaction center to form the ortho methylated products (Figure 3). This mechanism was also supported by the competitive adsorption of reactants with acidity probe pyridine [79]. A sequential adsorption of phenol and pyridine has shown the formation of phenolate anion and pyridinium ion that indicated the protonation of pyridine. 

Notably, NH3 is indispensable for the catalytic phenol synthesis. In the absence of NH3, neither benzene combustion nor phenol formation occurred on the Re-CVD/HZSM-5 catalyst (Table 10.6). Other amine compounds such as pyridine and isopropylamine did not promote the catalytic reaction at aU, which indicates that the role of NH3 in the catalysis is not due to its basic function. Fe/ZSM-5 has been reported to be active and selective for phenol synthesis from benzene using N2O as an oxidant [90, 91], but N2O did not act as an active oxidant on the Re-CVD/ HZSM-5 catalyst Furthermore, no positive effects were observed by the addition of both N2O and H2O. Notably, the NH3-pretreated Re-CVD/HZSM-5 catalyst selectively converted benzene into phenol with O2 in the absence of NH3, as discussed below. 

---