Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Diels-Alder reaction acrylate

An interesting example of a chiral aryl chromium complex enhancing diastereoselectivity in carbohydrate auxiliary-influenced acrylate Diels Alder reactions has been described by Shing and co-workers. Thus, for example, diethylalumi-nium chloride catalyzed reactions of complex 385 with 2-methylbutadiene... [Pg.390]

Apart from the thoroughly studied aqueous Diels-Alder reaction, a limited number of other transformations have been reported to benefit considerably from the use of water. These include the aldol condensation , the benzoin condensation , the Baylis-Hillman reaction (tertiary-amine catalysed coupling of aldehydes with acrylic acid derivatives) and pericyclic reactions like the 1,3-dipolar cycloaddition and the Qaisen rearrangement (see below). These reactions have one thing in common a negative volume of activation. This observation has tempted many authors to propose hydrophobic effects as primary cause of ftie observed rate enhancements. [Pg.27]

The Diels-Alder reaction provides us with a tool to probe its local reaction environment in the form of its endo-exo product ratio. Actually, even a solvent polarity parameter has been based on endo-exo ratios of Diels-Alder reactions of methyl acrylate with cyclopentadiene (see also section 1.2.3). Analogously we have determined the endo-exo ratio of the reaction between 5.1c and 5.2 in surfactant solution and in a mimber of different organic and acpieous media. These ratios are obtained from the H-NMR of the product mixtures, as has been described in Chapter 2. The results are summarised in Table 5.3, and clearly point towards a water-like environment for the Diels-Alder reaction in the presence of micelles, which is in line with literature observations. [Pg.137]

Barrelene was obtained via a double Diels-Alder reaction from a-pyrone with methyl acrylate (H.E. Zimmerman, I969A). The primarily forming bicyclic lactone decarboxylates in the heat, and the resulting cyclohexadiene rapidly undergoes another Diels-Alder cyclization. Standard reactions have then been used to eliminate the methoxycarbonyl groups and to introduce C—C double bonds. Irradiation of barrelene produces semibullvalene and cyclooctatetraene (H.E. Zimmerman. 1969B). [Pg.331]

Heteroatom functionalized terpene resins are also utilized in hot melt adhesive and ink appHcations. Diels-Alder reaction of terpenic dienes or trienes with acrylates, methacrylates, or other a, P-unsaturated esters of polyhydric alcohols has been shown to yield resins with superior pressure sensitive adhesive properties relative to petroleum and unmodified polyterpene resins (107). Limonene—phenol resins, produced by the BF etherate-catalyzed condensation of 1.4—2.0 moles of limonene with 1.0 mole of phenol have been shown to impart improved tack, elongation, and tensile strength to ethylene—vinyl acetate and ethylene—methyl acrylate-based hot melt adhesive systems (108). Terpene polyol ethers have been shown to be particularly effective tackifiers in pressure sensitive adhesive appHcations (109). [Pg.357]

Diels-Alder reactions in the presence of Lewis acids represent a case in which the Lewis acid is often used in catalytic quantities. The complexed ester (ethyl acrylate in the example given below) is substantially more reactive than the uncomplexed molecule, and the reaction proceeds through the complex. The reactive complex is regenerated by exchange of the Lewis acid from the adduct. [Pg.236]

The ability of 1,2 (or l,6)-dihydropyridines to undergo a Diels-Alder reaction with dienophiles such as methyl vinyl ketone, methyl acrylate, and acrylonitrile has been utilized in the synthesis of polyfunctional isoquinuclidine as a key intermediate in the synthesis of aspidosperma- and iboga-type alkaloids (66JA3099). [Pg.272]

When methyl 2-(indol-2-yl)acrylate derivative (22a) reacted with A-methoxy-carbonyl-l,2-dihydropyridine (8a) in refluxing toluene, in addition to the dimer of 22a (25%), a mixture of the expected isoquinculidine 23a and the product 24a (two isomers) was obtained in 7% and 45% yields, respectively (81CC37). The formation of 24a indicates the involvement of the 3,4-double bond of dihydropyridine. Similarly, Diels-Alder reaction of methyl l-methyl-2-(indol-2-yl)acrylate (22b) with 8a gave, in addition to dimer of 22b, a mixture of adducts 23b and 24b. However, in this case, product 23b was obtained as a major product in a 3 2 mixture of two isomers (with a- and (3-COOMe). The major isomer shows an a-conhguration. The yields of the dimer, 23b, and 24b were 25%, 30%, and 6%, respectively. Thus, a substituent on the nitrogen atom or at the 3-position of indole favors the formation of the isoquinuclidine adduct 23. [Pg.274]

The Diels-Alder reactions of the methyl or ethyl ester of benzenesulfonylindole-2-acrylic acid with several l-alkoxycarbonyl-l,2-dihydropyridines are reported and only a single stereoisomer was obtained, as in the case of l-methoxy(ethoxy)-carbonyl-1,2-dihydropyridines. However, when the Diels-Alder reaction of 17 was carried out with 8g[R = (CHsjsC], a mixture of two stereoisomers 18gand25were obtained in a 1 1 ratio (65% total yield). The bulky rerr-butyl group creates sufficient steric interference with the indole ring to cause the loss of stereochemistry ... [Pg.274]

Evans et al. reported that the his(oxazolinyl)pyridine (pybox) complex of copper(II) 17 is a selective catalyst of Diels-Alder reactions between a-bromoacrolein or methacrolein and cydopentadiene affording the adducts in high enantioselectivity [23] (Scheme 1.30). Selection of the counter-ion is important to achieve a satisfactory reaction rate and enantioselectivity, and [Cu(pyhox)](ShFg)2 gave the best result. This catalyst is also effective for the Diels-Alder reaction of acrylate dieno-philes (vide infra). [Pg.22]

Wulff and coworkers have applied their aluminum catalyst 2 containing a vaulted biphenanthrol ligand (VAPOL, Section 2.1) to the Diels-Alder reaction between methyl acrylate and cyclopentadiene [25] (Scheme 1.32). In this Diels-Alder reaction auto-induction is observed, because of a cooperative interaction between the product... [Pg.23]

Evans s bis(oxazolinyl)pyridine (pybox) complex 17, which is effective for the Diels-Alder reaction of a-bromoacrolein and methacrolein (Section 2.1), is also a suitable catalyst for the Diels-Alder reaction of acrylate dienophiles [23] (Scheme 1.33). In the presence of 5 mol% of the Cu((l )-pybox)(SbF5)2 catalyst with a benzyl substituent, tert-butyl acrylate reacts with cyclopentadiene to give the adduct in good optical purity (92% ee). Methyl acrylate and phenyl acrylate underwent cycloadditions with lower selectivities. [Pg.24]

The Diels-Alder reaction of a diene with a substituted olefinic dienophile, e.g. 2, 4, 8, or 12, can go through two geometrically different transition states. With a diene that bears a substituent as a stereochemical marker (any substituent other than hydrogen deuterium will suffice ) at C-1 (e.g. 11a) or substituents at C-1 and C-4 (e.g. 5, 6, 7), the two different transition states lead to diastereomeric products, which differ in the relative configuration at the stereogenic centers connected by the newly formed cr-bonds. The respective transition state as well as the resulting product is termed with the prefix endo or exo. For example, when cyclopentadiene 5 is treated with acrylic acid 15, the cw fo-product 16 and the exo-product 17 can be formed. Formation of the cw fo-product 16 is kinetically favored by secondary orbital interactions (endo rule or Alder rule) Under kinetically controlled conditions it is the major product, and the thermodynamically more stable cxo-product 17 is formed in minor amounts only. [Pg.91]

One of the earliest solvent polarity scales is Person s D scale. This scale is based on the endojexo ratio of the Diels-Alder reaction between cyclopentadiene and methyl acrylate (Figure 3.5-2, O = logio endo/exo). This reaction has been conducted in a number of ionic liquids, giving values in the 0.46-0.83 range [26]. [Pg.100]

Diels-Alder reactions Neutral ionic liquids have been found to be excellent solvents for the Diels-Alder reaction. The first example of a Diels-Alder reaction in an ionic liquid was the reaction of methyl acrylate with cyclopentadiene in [EtNH3][N03] [40], in which significant rate enhancement was observed. Howarth et al. investigated the role of chiral imidazolium chloride and trifluoroacetate salts (dissolved in dichloromethane) in the Diels-Alder reactions between cyclopentadiene and either crotonaldehyde or methacroline [41]. It should be noted that this paper describes one of the first examples of a chiral cationic ionic liquid being used in synthesis (Scheme 5.1-17). The enantioselectivity was found to be < 5 % in this reaction for both the endo (10 %) and the exo (90 %) isomers. [Pg.182]

A study of the Diels-Alder reaction was carried out by Earle et al. [42]. The rates and selectivities of reactions between ethyl acrylate (EA) and cyclopentadiene (CP) in water, 5 m lithium perchlorate in diethyl ether (5 m EPDE), and [BMIM][PE(3] were compared. The reactions in the ionic liquid [BMIM][PE(3] were marginally faster than in water, but both were slower than in 5 m EPDE [42, 43] (see Table 5.1-1 and Scheme 5.1-18). It should be noted that these three reactions give up to 98 % yields if left for 24 hours. The endo. exo selectivity in [BMIM][PE(3] was similar to that in 5 M EPDE, and considerably greater than that in water (Table 5.1-1). [Pg.182]

A similar study performed by Welton and co-workers studied the rate and selec-tivities of the Diels-Alder reaction between cyclopentadiene and methyl acrylate in a number of neutral ionic liquids [44]. It was found that endo. exo ratios decreased slightly as the reaction proceeded, and were dependent on reagent concentration and ionic liquid type. Subsequently, they went on to demonstrate that the ionic liquids controlled the endo. exo ratios through a hydrogen bond (Lewis acid) interaction with the electron-withdrawing group of the dienophile. [Pg.183]

It has been established that alkoxy alkenylcarbene complexes participate as dienophiles in Diels-Alder reactions not only with higher rates but also with better regio- and stereoselectivities than the corresponding esters [95]. This is clearly illustrated in Scheme 51 for the reactions of an unsubstituted vinyl complex with isoprene. This complex reacts to completion at 25 °C in 3 h whereas the cycloaddition reaction of methyl acrylate with isoprene requires 7 months at the same temperature. The rate enhancement observed for this complex is comparable to that for the corresponding aluminium chloride-catalysed reactions of methyl acrylate and isoprene (Scheme 51). [Pg.94]

The catalyst played an important role in the asymmetric synthesis of Corey lactone based on high diastereofacial selective Diels-Alder reaction between chiral acrylate 37 and 5-benzyloxymethylcyclopentadiene [41] (Equation 3.9). The cycloadduct 38 was then converted into chiral Corey lactone [42] by a three-step procedure. [Pg.112]

Clay-catalyzed asymmetric Diels-Alder reactions were investigated by using chiral acrylates [10]. Zn(II)- and Ti(IV)-K-10 montmorillonite, calcined at 55 °C, did not efficiently catalyze the cycloadditions of cyclopentadiene (1) with acrylates that incorporate large-size chiral auxiliaries such as cA-3-neopentoxyisobornyl acrylate (2) and (-)-menthyl acrylate (3, R = H) (Figure 4.1). This result was probably due to diffusion problems. [Pg.145]

Good yields and high diastereoselectivities were obtained by using zeolites in combination with Lewis-acid catalyst [21]. Table 4.7 illustrates some examples of Diels-Alder reactions of cyclopentadiene, cyclohexadiene and furan with methyl acrylate. Na-Y and Ce-Y zeolites gave excellent results for the cycloadditions of carbocyclic dienes, and combining these zeolites with anhydrous ZnBr2 further enhanced the endo diastereoselectivity of the reaction. An exception is the cycloaddition of furan that occurred considerably faster and with better yield, in comparison with the classic procedure [22], when performed in the presence of sole zeolites. [Pg.148]

Table 4.7 Diels-Alder reactions of carbo-and heterocyclic dienes with methyl acrylate catalyzed by zeolites and ZnBr2-doped zeolites... Table 4.7 Diels-Alder reactions of carbo-and heterocyclic dienes with methyl acrylate catalyzed by zeolites and ZnBr2-doped zeolites...
Table 4.17 CTAB effect on the Diels-Alder reactions between cyclopentadiene and acrylate esters... Table 4.17 CTAB effect on the Diels-Alder reactions between cyclopentadiene and acrylate esters...

See other pages where Diels-Alder reaction acrylate is mentioned: [Pg.829]    [Pg.829]    [Pg.11]    [Pg.12]    [Pg.130]    [Pg.23]    [Pg.44]    [Pg.115]    [Pg.101]    [Pg.183]    [Pg.76]    [Pg.78]    [Pg.124]    [Pg.78]    [Pg.110]    [Pg.178]   
See also in sourсe #XX -- [ Pg.348 , Pg.349 ]

See also in sourсe #XX -- [ Pg.348 , Pg.349 ]

See also in sourсe #XX -- [ Pg.348 , Pg.349 ]




SEARCH



1 -Methyl-2- acrylate, Diels-Alder reactions

2- furan, Diels-Alder reaction with methyl acrylate

Acrylate reaction

Acrylates via retro Diels-Alder reaction

Acrylates, in Diels-Alder reaction

Acrylic acid Diels-Alder reactions

Acrylic acid, p-nitroethyl ester Diels-Alder reactions

Cyclopentadiene, Diels-Alder reaction with methyl acrylate

Diels-Alder reaction acrylic compounds

Diels-Alder reaction chiral acrylate

Methyl acrylate, Diels-Alder cycloaddition reaction

© 2024 chempedia.info