Acids o-cresol

NiS04 6H20, chloroform, guanidine, uric acid, ascorbic acid, arginine acid, O-cresol, indole-3-acetic acid, phenol were taken from Ekros, Russia. 

C14H13ASO4 2,4 -Dihydroxy-3,3 -dimethyldiphenyl-arsinic acid (o-Cresol) 62... 

Hydroxy m-toluic Acid (o-Cresotic acid, o-eresotinic acid, o-homosalicylic acid, 2-hydroxy-Z-methylbenzoic acid, o-cresol-Z-carhoxylic acid, Z-methylsalicylic acid)... 

Hydro3qr-m-toluic Acid (i-Hydro S-methylbenzoic acid, o-cresol-5-carboxylic acid). 

Hydroxy-m-toluic acid. o-Cresotic acid. o-Cresol-6-carboxylic acid. 3-Methylsalicylic acid. o-Cresotinic acid. 

MCPA, l-methyl-A-chlorophenoxyacetic acid, Methoxone, CgH ClOj. Made by chlorination of o-cresol followed by reaction with chloroethanoic acid. While crystals, m.p. 118-119 C. As usually obtained, crude MCPA contains both 4- (60%) and 6- (40%) chloro-isomers, and is a light brown solid. Selective weedkiller. 

Separations based upon differences in the chemical properties of the components. Thus a mixture of toluene and anihne may be separated by extraction with dilute hydrochloric acid the aniline passes into the aqueous layer in the form of the salt, anihne hydrochloride, and may be recovered by neutralisation. Similarly, a mixture of phenol and toluene may be separated by treatment with dilute sodium hydroxide. The above examples are, of comse, simple apphcations of the fact that the various components fah into different solubihty groups (compare Section XI,5). Another example is the separation of a mixture of di-n-butyl ether and chlorobenzene concentrated sulphuric acid dissolves only the w-butyl other and it may be recovered from solution by dilution with water. With some classes of compounds, e.g., unsaturated compounds, concentrated sulphuric acid leads to polymerisation, sulphona-tion, etc., so that the original component cannot be recovered unchanged this solvent, therefore, possesses hmited apphcation. Phenols may be separated from acids (for example, o-cresol from benzoic acid) by a dilute solution of sodium bicarbonate the weakly acidic phenols (and also enols) are not converted into salts by this reagent and may be removed by ether extraction or by other means the acids pass into solution as the sodium salts and may be recovered after acidification. Aldehydes, e.g., benzaldehyde, may be separated from liquid hydrocarbons and other neutral, water-insoluble hquid compounds by shaking with a solution of sodium bisulphite the aldehyde forms a sohd bisulphite compound, which may be filtered off and decomposed with dilute acid or with sodium bicarbonate solution in order to recover the aldehyde. 

At other refineries, only two continuous stills in series are used, but these ate of 80—100 plate efficiency and yield pure grades of phenol and o-cresol and a base mixture of cresols, xylenols, and higher boiling tar acids. The latter are fractionated batchwise to various saleable grades of cresyHc acids. 

The epoxy cresol—novolak resins (2) are prepared by glycidylation of o-cresol—formaldehyde condensates in the same manner as the phenol—novolak resins. The o-cresol—formaldehyde condensates are prepared under acidic conditions with formaldehyde—o-cresol ratios of less than unity. 

Alkylphenols, ammonia, asbestos, chlorinated paraffins, 4-chloroaniline, cyanide, detergents, di- -butyl phthalate, polyaromatic hydrocarbons (PAHs e.g. anthracene, benzopyrene, methylcholanthrene, /i-naphthoflavone), nitrate, nitrite, petroleum oil, phenol, pentachlorophenol, 4-nitrophenol, dinitro-o-cresol, polychlorinated biphenyls (PCBs especially coplanar), polychlorinated dioxins, polybrominated naphthalenes, /i-sitosterol, sulfide, thiourea, urea, acid water, coal dust... 

At one time the requirement for phenol (melting point 41°C), eould be met by distillation of eoal tar and subsequent treatment of the middle oil with eaustic soda to extraet the phenols. Such tar acid distillation products, sometimes containing up to 20% o-cresol, are still used in resin manufacture but the bulk of phenol available today is obtained synthetically from benzene or other chemicals by such processes as the sulphonation process, the Raschig process and the cumene process. Synthetic phenol is a purer product and thus has the advantage of giving rise to less variability in the condensation reactions. 

Thus, reduction of the Mannich reaction product (65) from acetophenone leads to alcohol 66. Replacement of the hydroxyl group by chlorine (67) followed by displacement of halogen with the anion from o-cresol affords the ether 68. Removal of one of the methyl groups on nitrogen by means of the von Braun reaction or its modem equivalent (reaction with alkyl chloroformate followed by saponification) leads to racemic 69 which is then resolved with L-(+)-mandelic acid to give the levorotary antidepressant tomoxetine (69) [16]. 

S g of ethyl glycinate hydrochloride were dissolved in 400 cc of ethanol and 33.5 g of salicylic aldehyde were added. It is refluxed for half an hour and cooled. 38 cc of triethylamlne and 25 g of Raney nickel are then added whereafter hydrogenation is carried out at room temperature and under atmospheric pressure. After hydrogen adsorption was complete, the mixture was filtered and the alcohol evaporated off. The residue was taken up with acidified water, extracted with ether to eliminate part of the by-products, consisting mainly of o-cresol, then made alkaline with ammonia and extracted with ethyl acetate. The solvent was removed in vacuo and the residue crystallized from ether/petroleum ether. 36.7 g of o-hydroxybenzyl-aminoacetlc acid ethyl ester melting at 47°C are obtained. 

A sample of polyester (ca. 1 g, exactly weighed) is dissolved in 20 mL toluene-ethanol mixture (1/1 vol.) and titrated by a solution of KOH in ethanol (0.05 mol/L) using a potentiometric titrator. A blank titration must be performed under the same conditions. Hardly soluble polyesters (e.g., PET) must be dissolved in an o-cresol-chloroform mixture or in hot benzyl alcohol.417 The result (acid content) is normally expressed in mmol COOH/g polyester but may also be given as the acid number, defined as the number of milligrams of KOH required to neutralize 1 g of polyester. [Acid number = (number of mmol COOH/g polyester) x 56.106.]... 

This chapter compares the reaction of gas-phase methylation of phenol with methanol in basic and in acid catalysis, with the aim of investigating how the transformations occurring on methanol affect the catalytic performance and the reaction mechanism. It is proposed that with the basic catalyst, Mg/Fe/0, the tme alkylating agent is formaldehyde, obtained by dehydrogenation of methanol. Formaldehyde reacts with phenol to yield salicyl alcohol, which rapidly dehydrogenates to salicyladehyde. The latter was isolated in tests made by feeding directly a formalin/phenol aqueous solution. Salicylaldehyde then transforms to o-cresol, the main product of the basic-catalyzed methylation of phenol, likely by means of an intramolecular H-transfer with formaldehyde. With an acid catalyst, H-mordenite, the main products were anisole and cresols moreover, methanol was transformed to alkylaromatics. 

Dimethylol-o-cresol. A. Thirty seven percent formalin solution (16.2g) was added to a solution of o-cresol (lOg) and sodium hydroxide (4g) in 20 ml H20 at 0CC. After standing at room temperature for two days the solution was brought to pH 8.2 by the addition of 10% acetic acid and crystallization of 2,4-dimethylol-o-cresol began. 

The chiral auxiliaries anchored to the substrate, which is subjected to diastereoselective catalysis, is another factor that can control these reactions. These chiral auxiliaries should be easily removed after reduction without damaging the hydrogenated substrate. A representative example in this sense is given by Gallezot and coworkers [268], They used (-)mentoxyacetic acid and various (S)-proline derivates as chiral auxiliaries for the reduction of o-cresol and o-toluic acid on Rh/C. A successful use of proline derivates in asymmetric catalysis has also been reported by Harada and coworkers [269,270], The nature of the solvent only has a slight influence on the d.e. [271],... 

Saltar and Paasivirta [155] have described a method for the analysis in soils of MCPA (4-chloro-2-methyl phenoxy acetic acid) and two of its main metabolites, 4-chloro-o-cresol and 6-chloromethyl catechol by gas chromatography of their pentafluorobenzyl derivatives (Fig. 9.12). After derivitization of the residue extract, a clean-up procedure was applied. The best recoveries of compounds from soil were obtained when the extraction was performed by shaking with ether-acetone-heptane-hexane (2 1 1 1) from acidified soil and when the clean-up was done by thin layer chromatography (Table 9.17). Detection limits were in the range 20-25ng absolute. 

Fig. 9.72Structures of MCPA(4-chloro-2-methylphenoxyacetic acid (I)), its metabolites 4-chloro-o-cresol (II), 5-chloro-3-methyl catechol (III), 4-chloro-2-methyl muconic acid (IV), reagent pentafluorobenzyl bromide (V), and the derivatives VI-VIII from l-lll Source Reproduced with permission from the American Chemical Society [155]... 

---