Solubility acidic groups

The azo dyes are not of any great practical value owing to their slight solubility in water. Th4 introduction of a sulphonic acid group into the molecide has no effect upon the colour, but renders the dye water-soluble—a fact of great commercial value. The simplest way of achieving this is to employ an amine, e.g., sulphanilic acid, in which the — OjH group is already present. 

RCH(OH)=CHCOR or -keto esters RCH(OH)=CHCOOR ) dissolve in dilute sodium hydroxide solution, i.e., contain an acidic group of sufficient strength to react with the alkah. Carboxyhc acids and sulphonic acids are soluble in dilute solutions of sodium bicarbonate some negatively-substituted phenols, for example, picric acid, 2 4 6-tribromo-phenol and 2 4-dinitrophenol, are strongly acidic and also dissolve in dilute sodium bicarbonate solution. 

This group may be further subdivided into Group VA—soluble in concentrated sulphimic acid and soluble in 85 per cent, phosphoric acid— and Group VB—soluble in concentrated sulphuric acid and insoluble in 85 per cent, phosphoric acid. 

Most xanthene dyes are classified as basic dyes by their method of appHcation acid dyes can be produced by introduction of sulfonic acid groups. The fluoresceins, which contain carboxy and hydroxy substituents, are also acid dyes for coloration of silk. Some of the fluoresceins in which the carboxy group has been esterified, are soluble in alcohol or other organic solvents and can be classified as solvent dyes. Mordant dyes can be produced by introducing o-dihydroxy or sahcyhc acid groups (2), which when metallised can have very good lightfastness. 

Esters. Most acryhc acid is used in the form of its methyl, ethyl, and butyl esters. Specialty monomeric esters with a hydroxyl, amino, or other functional group are used to provide adhesion, latent cross-linking capabihty, or different solubihty characteristics. The principal routes to esters are direct esterification with alcohols in the presence of a strong acid catalyst such as sulfuric acid, a soluble sulfonic acid, or sulfonic acid resins addition to alkylene oxides to give hydroxyalkyl acryhc esters and addition to the double bond of olefins in the presence of strong acid catalyst (19,20) to give ethyl or secondary alkyl acrylates. 

Polyethers. Antibiotics within this family contain a number of cycHc ether and ketal units and have a carboxyHc acid group. They form complexes with mono- and divalent cations that ate soluble ia aoapolar organic solvents. They iateract with bacterial cell membranes and allow cations to pass through the membranes causiag cell death. Because of this property they have been classified as ionophores. Monensia, lasalocid, and maduramicia are examples of polyethers that are used commercially as anticoccidial agents ia poultry and as growth promotants ia mmiaants. 

The soluble azo dyes contain one or more sulfonic acid groups. Their degree of water solubiUty is determined by the number of sulfonic groups present and their position in the molecule. FD C Red No. 40 (5) and D C Orange No. 4 (16) belong in this class. 

Acid Dyes. These water-soluble anionic dyes ate appHed to nylon, wool, sUk, and modified acryHcs. They ate also used to some extent for paper, leather, food, and cosmetics. The original members of this class aU had one or mote sulfonic or catboxyHc acid groups in thein molecules. This characteristic probably gave the class its name. Chemically, the acid dyes consist of azo (including preformed metal complexes), anthraquiaone, and ttiaryHnethane compounds with a few azHie, xanthene, ketone imine, nitro, nitroso, and quHiophthalone compounds. 

For some applications, such as for repulpable type PSAs, it may be advantageous to incorporate high levels of acrylic acid because this makes the polymer more hydrophilic. At the same time, high levels of acid also improve the water-dispersibility of the adhesive, especially at higher pH where the acid groups are converted to the more water-soluble neutralized salt form. Since the high level of acid increases the of the resulting polymer, a non-tacky material results. To make the adhesive pressure sensitive, the polymer can be softened with water-dispersible or soluble plasticizers, such as polyethers [68]. 

Sulphonphthaleins. These indicators are usually supplied in the acid form. They are rendered water-soluble by adding sufficient sodium hydroxide to neutralise the sulphonic acid group. One gram of the indicator is triturated in a clean glass mortar with the appropriate quantity of 0.1 M sodium hydroxide solution, and then diluted with water to 1 L. The following volumes of 0.1 M sodium hydroxide are required for 1 g of the indicators bromophenol blue, 15.0 mL bromocresol green, 14.4 mL bromocresol purple, 18.6 mL chlorophenol red, 23.6 mL bromothymol blue, 16.0 mL phenol red, 28.4 mL thymol blue, 21.5 mL cresol red, 26.2 mL metacresol purple, 26.2 mL. 

Similar to tannins, the polycarboxylic acid group provides a chelating function that ties up metal ions. The anionic sulfonate group functionality confers both solubility and dispersing capability for multivalent cations (calcium, iron, etc.). 

Finally, a new water-soluble polyphosphazene was recently synthesized that has the structure shown in 36 (46). This polymer has two attributes as a biomedical macromolecule. First, the pendent carboxylic acid groups are potential sites for condensation reactions with amines, alcohols, phenols, or other carboxylic acid units to generate amide, ester, or anhydride links to polypeptides or bioactive small molecules. Second, polymer forms ionic crosslinks when brought into contact with di- or trivalent cations such as Ca or Ai3+. The crosslinking process converts the water-soluble polymer to a hydrogel, a process that can be reversed when the system... 

---