Acid chlorides enolates

In their original communication on the alkylation and acylation of enamines, Stork et al. (3) had reported that the pyrrolidine enamine of cyclohexanone underwent monoacylation with acid chlorides. For example, the acylation with benzoyl chloride led to monobenzoylcyclohexanone. However, Hunig and Lendle (33) found that treatment of the morpholine enamine of cyclopentanone with 2 moles of propionyl chloride followed by acid hydrolysis gave the enol ester (56), which was proposed to have arisen from the intermediate (55). 

The acylation of enamino ketones can take place on oxygen or on carbon. While reaction at nitrogen is a possibility, the N-acylated products are themselves acylating agents, and further reaction normally takes place. The first reported acylation of enamino ketones (72) was that of 129, prepared by acylation of the enamine (113), which was shown to have undergone O acylation because on mild hydrolysis the enol ester (130) could be isolated. A similar reaction took place with other aliphatic acid chlorides (80) and with dibasic acid chlorides [e.g., with succinyl chloride to give 118 above]. 

The experimental conditions for the syntheses starting from acid chlorides of hydroxamic acids and from nitrile oxides are somewhat different. In the former case the other component of the reaction is organometallic, usually an organomagnesium derivative of an acetylene or, less frequently, a sodium enolate of a /8-diketone. Nitrile oxides condense directly with unsaturated compounds. 

A thioamide of isonicotinic acid has also shown tuberculostatic activity in the clinic. The additional substitution on the pyridine ring precludes its preparation from simple starting materials. Reaction of ethyl methyl ketone with ethyl oxalate leads to the ester-diketone, 12 (shown as its enol). Condensation of this with cyanoacetamide gives the substituted pyridone, 13, which contains both the ethyl and carboxyl groups in the desired position. The nitrile group is then excised by means of decarboxylative hydrolysis. Treatment of the pyridone (14) with phosphorus oxychloride converts that compound (after exposure to ethanol to take the acid chloride to the ester) to the chloro-pyridine, 15. The halogen is then removed by catalytic reduction (16). The ester at the 4 position is converted to the desired functionality by successive conversion to the amide (17), dehydration to the nitrile (18), and finally addition of hydrogen sulfide. There is thus obtained ethionamide (19)... 

The few exceptions to this general rule arise when the a-carbon carries a substituent that can stabilize carbonium-ion development well, such as oxygen or sulphur. For example, 1-trimethylsilyl trimethylsilyl enol ethers give products (72) derived from electrophilic attack at the /J-carbon, and the vinylsilane (1) reacts with a/3-unsaturated acid chlorides in a Nazarov cyclization (13) to give cyclopentenones such as (2) the isomeric vinylsilane (3), in which the directing effects are additive, gives the cyclopentenone (4) ... 

Disconnection of the 1,3-dlketone obviously comes next but it will be better to add an activating group to control the reaction. One possibility is to acylate specific enol equivalent (56) with acid chloride (57). 

The magnesium enolates are prepared by treatment of malonic acid half ester either with magnesium ethylate[24],[32] or with isopropylmagnesium bromide[24] or chloride.t26] Ref. [23] describes the synthesis of a 13C-labelled ethyl acetoacetate. Concerning the synthesis of porphyrin / -ketoesters,[3 1 it was noticed that the method via imidazolides is more efficient than the other approach via acid chlorides and sodiomalonic esters. 

The p-dicarbonyl compound (10 mmol) in CH,C12 is added, with stirring, to TBA-HS04 (3.4 g, 10 mmol) in aqueous NaOH (2M, 10 ml) at 20°C. The acid chloride (10 mmol) is added dropwise over ca. 2 min and the mixture is stirred for a further 1 h. The aqueous phase is separated, extracted with CH,CI, (10 ml), and the combined organic solutions are washed with H,0 (2x10 ml), dried (MgS04), and evaporated. Et,0 (25 ml) is added to the residue, the solution is filtered, and evaporated to yield the enol esters. 

Ethyl 3-oxoalkanoates when not commercially available can be prepared by the acylation of tert-butyl ethyl malonate with an appropriate acid chloride by way of the magnesium enolate derivative. Hydrolysis and decarboxylation in acid solution yields the desired 3-oxo esters [59]. 3-Keto esters can also be prepared in excellent yields either from 2-alkanone by condensation with ethyl chloroformate by means of lithium diisopropylamide (LDA) [60] or from ethyl hydrogen malonate and alkanoyl chloride usingbutyllithium [61]. Alternatively P-keto esters have also been prepared by the alcoholysis of 5-acylated Mel-drum s acid (2,2-dimethyl-l,3-dioxane-4,6-dione). The latter are prepared in almost quantitative yield by the condensation of Meldrum s acid either with an appropriate fatty acid in the presence of DCCI and DMAP [62] or with an acid chloride in the presence of pyridine [62] (Scheme 7). 

An interesting bifunctional system with a combination of In(OTf)3 and benzoyl-quinine 65 was developed in p-lactam formation reaction from ketenes and an imino ester by Lectka [Eq. (13.40)]. High diastrereo- and enantioselectivity as well as high chemical yield were produced with the bifunctional catalysis. In the absence of the Lewis acid, polymerization of the acid chloride and imino ester occurred, and product yield was moderate. It was proposed that quinine activates ketenes (generated from acyl chloride in the presence of proton sponge) as a nucleophile to generate an enolate, while indium activates the imino ester, which favors the desired addition reaction (66) ... 

Two years later, Craig and Robinson attempted an alternative synthesis of 8 with a more symmetrical pathway starting from derivatives of fluoranthene. Cycliza-tion of fluoranthene-7,10-diacetic acid 14 was attempted to produce diketone 15, expected to enolize to the dihydroxycorannulene 16. Unfortunately, several attempts at cyclization failed, including anhydrous hydrofluoric acid, concentrated sulfuric acid, and polyphosphoric acid. Friedel-Crafts cyclization of the corresponding acid chloride of 14 with aluminum or stannic chloride was similarly unsuccessful. However, although Craig and Robinson were not successful, they developed a convenient synthesis of 7,10-disubstituted fluoranthenes which turned out later to be of premium importance in a new, successful synthesis of corannulene. 

Chiral carboxyamides derived from acid chlorides and A-chiral cA-aminoindanol can be protonated and Li Cu transmetallated to generate copper enolates which react with A-lithium derivative of A-Boc-O-tosylhydroxylamine (LiBTOC) 31 to give a-A-Boc amino carboxamides in high yields and enantiomeric excess (Scheme 38) . The chiral auxiliary can be removed by acidic hydrolysis to obtain the a-aminocarboxylic acid. 

As was pointed out in Part A, Section 7.3, under many conditions halogenation is faster than enolization. When this is true, the position of substitution in unsymmetrical ketones is governed by the relative rates of formation of the isomeric enols. In general, mixtures are formed with unsymmetrical ketones. The presence of a halogen substituent decreases the rate of acid-catalyzed enolization and therefore retards the introduction of a second halogen at the same site. Monohalogenation can therefore usually be carried out satisfactorily. A preparatively useful procedure for monohalogenation of ketones involves reaction with cupric chloride or cupric bromide.81 82 83 84 85 86... 

The same process has been extended to trialkylphosphonoacetates. Acylation with acid chlorides of the magnesium enolates derived from trimethyl and triethyl phospho-noacetates using a MgCl2/Et3N system provides 2-acyl dialkylphosphonoacetates. Further decarboxylation of these latter compounds affords /3-ketophosphonates . 

A similar procedure for the synthesis of a-acyl aminoesters has been proposed using a MgCl2/R3N base system to generate the magnesium enolates of a series of a-carboxy aminoesters. These reagents react smoothly at 0 °C with a variety of acid chlorides to give a-acyl aminoesters in good to excellent yields (equation 58). 

The statine-like moiety in one of the first drugs, saquinovir (23-8), comprises a transition state mimic for the cleavage of phenylalanylprolyl and tyrosylprolyl sequences. Constmction starts with the protection of the amino group of phenylalanine as its phthaloyl derivative (Phth) by reaction with phthalic anhydride this is then converted to acid chloride. The chain is then extended by one carbon using a Friedel-Crafts-like reaction. The required reagent (21-2) is prepared by reaction of the enolate obtained from the /7A-silyl ether (21-3) of glyoxylic acid and lithio... 

---