A -’-Diene

An intense purple crystalline solid m.p. 219-220 C. One of the few monomeric cyclo-pentadienone derivatives, most of which spontaneously undergo self Diels-Alder type dimerization. Used as a diene in many studies of various aspects of the Diels-Alder reaction. ... 

In the Diels-Alder reaction (in older literature referred to as the diene synthesis ) a six-membered ring is fonned through fusion of a four-tt component, usually a diene and a two-7C component, which is commonly referred to as the dienophile (Scheme 1.1). 

The method has been applied in asymmetric and regioselective syntheses of several natural compounds. Two simple examples are the commercial syntheses of the gipsy moth hydrophobic sex attractant, disparlure (RE. Rossiter, 1981, 1985) and < mono-epoxidation of a diene in a leukotriene B4 synthesis (L.S. Mills, 1983). 

In Diels-Alder reactions a nitroolefin may function as an electron-deficient ene com-onent or a 1,2-dihydropyridine derivative may be used as a diene component. Both types of iactants often yield cyclic amine precursors in highly stereoselective manner (R.K. Hill, 1962 i. BOchi, 1965, 1966A). 

The reaction of the allylic acetate with a diene system 784 affords the poly-fused ring system 785 by three repeated alkene insertions[487]. An even more strained molecule of the [5.5.5.5] fenestrane 788 has been constructed by a one-pot reaction in a satisfactory yield by the Pd-catalyzed carbonylation-cycliza-tion of 786 without undergoing elimination of /3-hydrogen in the cr-alkylpalla-dium intermediate 787 owing to unfavorable stereochemistry for syn elimination[488]. 

Arylsilylation of conjugated dienes to give 88 takes place at 80 °C by the reaction of a diene, disilane, and benzoyl chloride, which undergoes facile decarbonylation at 80°C[83]. 

A particular kind of conjugate addition reaction earned the Nobel Prize in chemistry for Otto Diels and Kurt Alder of the University of Kiel (Germany) m 1950 The Diels-Alder reaction is the conjugate addition of an alkene to a diene Using 1 3 buta diene as a typical diene the Diels-Alder reaction may be represented by the general equation... 

The product of a Diels-Alder cycloaddition always contains one more ring than was present m the reactants The dienophile maleic anhydride contains one ring so the product of Its addition to a diene contains two... 

Let us now examine the Diels-Alder cycloaddition from a molecular orbital perspective Chemical experience such as the observation that the substituents that increase the reac tivity of a dienophile tend to be those that attract electrons suggests that electrons flow from the diene to the dienophile during the reaction Thus the orbitals to be considered are the HOMO of the diene and the LUMO of the dienophile As shown m Figure 10 11 for the case of ethylene and 1 3 butadiene the symmetry properties of the HOMO of the diene and the LUMO of the dienophile permit bond formation between the ends of the diene system and the two carbons of the dienophile double bond because the necessary orbitals overlap m phase with each other Cycloaddition of a diene and an alkene is said to be a symmetry allowed reaction... 

Alkadiene (Section 10 5) Hydrocarbon that contains two carbon-carbon double bonds commonly referred to as a diene... 

Discussion of ladder polymers also enables us to introduce a step-growth polymerization that deviates from the simple condensation reactions which we have described almost exclusively in this chapter. The Diels-Alder reaction is widely used in the synthesis of both ladder and semiladder polymers. In general, the Diels-Alder reaction occurs between a diene [XVI] and a dienophile [XVll] and yields an adduct with a ring structure [XVlll] ... 

The bifunctionality of the bis-diene and bis-dienophile monomers is apparent from the condensation product, structure [XXI], which still contains a diene and a dienophile in the same molecule. This polymer is crystalline, indicating a high degree of stereoregularity in the condensed rings. It decomposes to a graphitic material before melting. 

The balance between aromatic and aUphatic reactivity is affected by the type of substituents on the ring. Furan functions as a diene in the Diels-Alder reaction. With maleic anhydride, furan readily forms 7-oxabicyclo [2.2.1]hept-5-ene-2,3-dicarboxyhc anhydride in excellent yield [5426-09-5] (4). 

Isoprene is highly reactive both as a diene and through its allyhc hydrogens, and its reactions are similar to those of butadiene (qv) (8). Apart from polymerisation, the most widely investigated isoprene reactions are the formation of six-membered rings by the Diels-Alder reaction ... 

In keeping with its aromatic character, pyrrole is relatively difficult to hydrogenate, it does not ordinarily serve as a diene for Diels-Alder reactions, and does not undergo typical olefin reactions. Klectrophilic substitutions are the most characteristic reactions, and pyrrole has often been compared to phenol or... 

The role of activators in the mechanism of vulcanization is as follows. The soluble zinc salt forms a complex with the accelerator and sulfur. This complex then reacts with a diene elastomer to form a mbber—sulfur—accelerator cross-link cursor while also Hberating the zinc ion. The final step involves completion of the sulfur cross-link to another mbber diene segment (18). 

A process has been disclosed in which the mixture of naphthoquinones is reacted with a diene such as butadiene. Owing to the fact that the undesked product is an unsubstituted naphthoquinone, this dieneophile readily reacts to form a Diels-Alder adduct. By appropriate control of reaction parameters, Htde reaction is observed with the substituted naphthoquinone. Differential solubiUty of the adduct and vitamin allows for a facile separation (57,58). 

Copolymers of ethylene and propylene (EPM) and terpolymers of ethylene, propylene, and a diene (EPDM) as manufactured today are mbbers based on the early work of G. Natta and co-workers (1). A genetic formula for EPM and EPDM may be given as follows, where ra = (- GO mol%),... 

Oxidation of thiophene with peracid under carefully controlled conditions gives a mixture of thiophene sulfoxide and 2-hydroxythiophene sulfoxide. These compounds are trapped by addition to benzoquinone to give ultimately naphthoquinone (225) and its 5-hydroxy derivative (226) (76ACS(B)353). The further oxidation of the sulfoxide yields the sulfone, which may function as a diene or dienophile in the Diels-Alder reaction (Scheme 88). An azulene synthesis involves the addition of 6-(A,A-dimethylamino)fulvene (227) to a thiophene sulfone (77TL639, 77JA4199). 

Finally, it should be mentioned (Section 4.04.2.1.9) that pyrazole never reacts as an alkene towards a diene or a 1,3-dipole nor as an azadiene towards a dienophile. 

In the indazole series an example of a type (c) reaction (Figure 25) has been described utilizing a 1,3-dipole instead of a diene (Scheme 32) (76H(4)1655). The cycloadduct (351) is transformed into the triazole (352) on reaction with hydrochloric acid. 

H-Azepine derivatives form a diene complex with tricarbonyliron, leaving uncomplexed the third of the double bonds. If the 3-position is substituted, two different such complexes are possible, and are in equilibrium, as seen in the NMR spectrum. An ester group in the 1-position of the complex can be removed by hydrolysis, to give an NH compound which, in contrast to the free 1/f-azepine, is stable. The 1-position can then be derivatized in the manner usual for amines (Scheme 22). The same tricarbonyliron complex can, by virtue of the uncomplexed 2,3-double bond, serve as the dienophile with 1,2,4,5-tetrazines. The uncomplexed N-ethoxycarbonylazepine also adds the tetrazine, but to the 5,6-double... 

Tricarbonyliron complexes of 1,2-diazepines do not show the rapid isomerization found in their azepine counterparts (Scheme 22) the iron forms a diene complex with the C=C double bonds in the 4- and 6-positions. The chemistry of the 1,2-diazepine complexes is similar to that of the azepine complexes (Section 5.18.2.1) (81ACR348). 

Oxepin also forms a diene complex with tricarbonyliron (78JHC1057). 

DIELS - ALDER Cyclohexene synthesis A 2 Thermal cycloaddition between a diene and an activated alkene or alkyrte, sometimes catalyzed by Lewis acids. 

This situation is identical to the previous one and occurs for example when paraffin wax is mixed into rubber above the melting point of the wax. On cooling, the wax starts to crystallise, some of it forming a bloom on the rubber surface. Such a bloom assists in protecting a diene rubber from ozone attack. 

In addition to the somewhat sophisticated triblock thermoplastic elastomers described above, mention should be made of another group of thermoplastic diene rubbers. These are physical blends of polypropylene with a diene rubber such as natural rubber. These may be considered as being an extension to the concept of thermoplastic polyolefin rubbers discussed in Section 11.9.1 and although extensive experimental work has been carried out with these materials they do not yet appear to have established themselves commercially. 

Whilst the ASA materials are of European origin, the AES polymers have been developed in Japan and the US. The rubber used is an ethylene-propylene terpolymer rubber of the EPDM type (see Chapter 11) which has a small amount of a diene monomer in the polymerisation recipe. The residual double bonds that exist in the polymer are important in enabling grafting with styrene and acrylonitrile. The blends are claimed to exhibit very good weathering resistance but to be otherwise similar to ABS. 

EPDM terpolymer of ethylene, propylene and a diene with the residual unsaturated... 

The addition of hydrogen halides to dienes can result in either 1,2- or 1,4-addition. The extra stability of the allylic cation formed by proton transfer to a diene makes the ion-... 

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... 

---