With phosphoric acid ester amides

Phosphoramidous fluorides, 13 383-389 Phosphoranes, 16 47 cage compounds, 30 246 as propellanes, 33 268 Phosphorescence, 19 68 Phosphoric acid ester amides, reaction with hexafluoroacetone, 30 237 Phosphoric acids, condensed, properties of, 5 220... 

Phosphoric acid ester amides suffer insertion into the N—H bond (770). Dehydration of 42 with trifluoroacetic acid anhydride and triethylamine yields the ketimide 43. Decomposition of 42 at 170°C leads to recovery of the starting material. 

Nitrogen- or Fluorine-Containing Phosphonates In N-containing phosphoric acid esters an >NH or >NR group is used instead of the bivalent >0. A typical reaction is the transformation of POCl3 with primary or secondary amines to the corresponding amides see Eq. (73) ... 

The lubrication system is extremely complex. The mechanism of lubrication is partly dictated by the nature of interactions between the lubricant and the solid surface. Additives blended into lubricating oil formulations either adsorb onto the sliding surfaces, eg., fatty alcohols, fatty amines, amides, phosphoric acid esters (friction modifiers), or react with the surface, eg., ZDDP, MoDTC, MoDDP organic phosphates (extreme pressure). Some interactions affecting the surfaces of metals include adsorption, chemisorption, and tribochemical reactions-these form new compounds on the surface and lubrication by reaction products (Bhushan and Gupta, 1991 Briscoe et al., 1973 Briscoe and Evens, 1982 Heinicke, 1984 Hsu and Klaus, 1978 and 1979 Klaus and Tewksbury, 1987 Lansdown, 1990 Liston, 1993 McFadden et al., 1998 Studt, 1989). 

In addition to in the free state, sulfuric acid exists in nature in the form of esters, amides, and the anhydride with phosphoric acid ... 

For example, EtCl reacts with the alloy to give tetraethyllead in 85 % yield [9]. This method is such that only one quarter of the lead is converted to lead alkyl and the remainder has to be recycled. Unfortunately, sodium-rich alloys such as Na4Pb do not react satisfactorily. Ketones, aldehydes, acetals, acid anhydrides, esters, amides, phosphoric acid esters, organosilicons, organoaluminum compounds, etc. as reaction accelerators of the alloy process have been reported [9]. For example, the reaction of EtCl at 100-120 °C in the presence of 0.1 % acetone gives tetraethyllead in 98% yield [10]. 

Acryhc esters dimerize to give the 2-methylene glutaric acid esters catalyzed by tertiary organic phosphines (37) or organic phosphorous triamides, phosphonous diamides, or phosphinous amides (38). Yields of 75—80% dimer, together with 15—20% trimer, are obtained. Reaction conditions can be varied to obtain high yields of trimer, tetramer, and other polymers. 

The complex thioamide lolrestat (8) is an inhibitor of aldose reductase. This enzyme catalyzes the reduction of glucose to sorbitol. The enzyme is not very active, but in diabetic individuals where blood glucose levels can. spike to quite high levels in tissues where insulin is not required for glucose uptake (nerve, kidney, retina and lens) sorbitol is formed by the action of aldose reductase and contributes to diabetic complications very prominent among which are eye problems (diabetic retinopathy). Tolrestat is intended for oral administration to prevent this. One of its syntheses proceeds by conversion of 6-methoxy-5-(trifluoroniethyl)naphthalene-l-carboxyl-ic acid (6) to its acid chloride followed by carboxamide formation (7) with methyl N-methyl sarcosinate. Reaction of amide 7 with phosphorous pentasulfide produces the methyl ester thioamide which, on treatment with KOH, hydrolyzes to tolrestat (8) 2[. 

Surfactants are prepared which contain carboxylic acid ester or amide chains and terminal acid groups selected from phosphoric acid, carboxymethyl, sulfuric acid, sulfonic acid, and phosphonic acid. These surfactants can be obtained by reaction of phosphoric acid or phosphorus pentoxide with polyhydroxystearic acid or polycaprolactone at 180-190°C under an inert gas. They are useful as polymerization catalysts and as dispersing agents for fuel, diesel, and paraffin oils [69]. 

A wide range of substrates have been reported to proceed successfully to conjugate addition products with the monobasic forms of phosphorous acids, including esters,371415416 amides,417-419 nitriles,415 420 acid chlorides,421 enamides,375 and nitro compounds.422-424... 

Alkynenitriles, RC=CC=N, are generally prepared by dehydration of acid amides. RC=CC(=0)NH2, with phosphorous pentoxide. For HC=CC=N and NsCChCChN [130] this is the only available method it requires the previous synthesis of the carboxylic esters and their conversion into the acid amides. In principle it should be possible to prepare these useful... 

---