Wearing comfort

Improved Com fort Properties. Wear comfort generally means cotton-like properties. The abiUty to absorb moisture from the skin and the softness of cotton fabrics are considered to be the two key properties for comfort. The extremely fine denier of cotton fibers accounts for its softness. 

The favorable technological properties of synthetic fibers are often combined with the pleasant feel and wearing comfort of natural fibers. Hence, the introduction of man-made fibers has resulted in rapid expansion of the mixed processing of various types of fibers. 

The oldest repellent finish is to repel water. The purpose of this finish is self evident. Drops of water should not spread on the surface of the textile and should not wet the fabric. The drops should stay on the surface and easily drip off. Similarly, oil repellent finishes should prevent oily fluids from wetting treated textiles. In a similar manner, soil-repellent finishes should protect textiles from both dry and wet soils. In all cases, the air permeability of the finished fabric should not be significantly reduced. Waterproofing treatments will not be covered in depth. A waterproof textile should withstand the hydrostatic pressure exerted by a column of water from at least aim height before the first drops of water penetrate through the fabric. In practice this is mostly achieved with coatings which have the disadvantages of stiff handle, lack of air and vapour permeability and consequently poor wear comfort. 

Wearing comfort is another area where nitrile-water interactions are of utmost importance. Wearing comfort requires — among other things — easy wetting of, and good moisture transport within, the fabric or knit used for the manufacture of a garment. Body moisture should be absorbed rapidly and steadily, and transported... 

PRODUCTS FOR ENHANCING SOFT CONTACT LENS WEAR COMFORT... 

Wear comfortable clothes. If you have a lucky color or a lucky piece of clothing or jewelry, wear it—as long as you won t distract anyone else. Take along a lucky charm if you have one. 

Hollies [23] conducted wearer trails for shirts made of various fibers. They concluded that the largest factor that influenced wearing comfort was the ability of fibers to absorb water, regardless of weather fibers were synthetic or natural. 

If large and heavy filters are used to maximize retention of airborne contaminants, they must be worn on the body using suitable assemblies connected to the mask by an air line. In such a case the support of a power-assisted filtering device is recommended (see Section 6.8.4.1.3). Persons using refractive lenses quite often complain about problems with low wearing comfort when using full-face masks, and they also have fogging problems with the visors. This problem does not occur with half masks. 

Because of the excellent wearing comfort and the low prices, particle-filtering half masks are preferred for everyday working situations. In analogy to particle filters for half masks, they are subdivided into 3 classes, using the code FFP 1, 2, or 3 according to EN 149 [6-68]. Particle-filtering half masks are available on the market... 

MAJOR APPLICATIONS The dopes of PBA can be utilized for the preparation of films, filaments, fibrids, and coatings. Wet-extruded, tough, clear, flexible films can be applied to substrates like glass, ceramics, metals, concrete, and polymeric materials.The high-temperature resistance of the polyaramids make them suitable for asbestos replacement in heat-resistant work wear. The service life is longer for asbestos and the wearing comfort is greater. PBA has been superseded by poly( p-phenylene terephthalamide). ... 

A well-fitted sport garment must not interfere, impede or restrict the body movement relative to the end use, sport activity and range of movement expected this is the ergonomic and utility wear comfort of clothing. When the garment impedes or restricts the body movement, it causes discomfort as well as increased metabolic cost (Ashdown, 2011). 

Ergonomic wear comfort of a garment depends on its construction and the elastomeric properties of the fabric(s) composing the garment (Bartels, 2005). Fabric properties affecting the body movement are weight, thickness, stiffness, stretch and recovery. 

Liu, R., Little, T., 2009. The 5ps model to optimize compression athletic wear comfort in sports. J. Fiber Bioeng. Inform. 2 (1), 41-52. 

Cotton fabrics have long been considered a standard by which textile comfort properties are measured. Although many properties contribute to wear comfort [404], it is believed that the two dominant properties inherent to cotton are the ability to absorb moisture from the skin and softness. The second property is the result of the extremely fine denier of cotton fibers. Both properties can be achieved in acrylic fibers. However, fine-denier acrylics are achieved at the cost of reduced spinning productivity. 

---