Wavelength phosphorescence

In an emission spectrum a fixed wavelength is used to excite the molecules, and the intensity of emitted radiation is monitored as a function of wavelength. Although a molecule has only a single excitation spectrum, it has two emission spectra, one for fluorescence and one for phosphorescence. The corresponding emission spectra for the hypothetical system in Figure 10.43 are shown in Figure 10.44. 

A fluorescence or phosphorescence spectrum in which the emission intensity at a fixed wavelength is measured as a function of the wavelength used for excitation. 

Selectivity The selectivity of molecular fluorescence and phosphorescence is superior to that of absorption spectrophotometry for two reasons first, not every compound that absorbs radiation is fluorescent or phosphorescent, and, second, selectivity between an analyte and an interferant is possible if there is a difference in either their excitation or emission spectra. In molecular luminescence the total emission intensity is a linear sum of that from each fluorescent or phosphorescent species. The analysis of a sample containing n components, therefore, can be accomplished by measuring the total emission intensity at n wavelengths. 

At the other extreme we can consider the electron as a particle which can be observed as a scintillation on a phosphorescent screen. Figure 1.4(b) shows how, if there is a large number of waves of different wavelengths and amplitudes travelling in the x direction, they may reinforce each other at a particular value of x, x say, and cancel each other elsewhere. This superposition at x is called a wave packet and we can say the electron is behaving as if it were a particle at x. ... 

Fluorometry and Phosphorimetry. Modem spectrofluorometers can record both fluorescence and excitation spectra. Excitation is furnished by a broad-band xenon arc lamp foUowed by a grating monochromator. The selected excitation frequency, is focused on the sample the emission is coUected at usuaUy 90° from the probe beam and passed through a second monochromator to a photomultiplier detector. Scan control of both monochromators yields either the fluorescence spectmm, ie, emission intensity as a function of wavelength X for a fixed X, or the excitation spectmm, ie, emission intensity at a fixed X as a function of X. Fluorescence and phosphorescence can be distinguished from the temporal decay of the emission. 

The aim of this work is the development of pyrene determination in gasoline and contaminated soils. For this purpose we used room temperature phosphorescence (RTP) in micellar solutions of sodium dodecylsulphate (SDS). For pyrene extraction from contaminated soils hexane was used. Then exttacts earned in glass and dried. After that remains was dissolved in SDS solution in the presence of sodium sulphite as deoxygenation agent and thallium (I) nitrate as heavy atom . For pyrene RTP excitation 337 nm wavelength was used. To check the accuracy of the procedures proposed for pyrene determining by RTP, the pyrene concentrations in the same gasoline samples were also measured by GC-MS. 

Colorless substances absorb at wavelengths shorter than those of the visible range (the UV range normally amenable to analysis X = 400...200 nm). Such compounds can be detected by the use of UV-sensitive detectors (photomultipliers. Sec. 2.2.3.1). Substances that absorb in the UV range and are stimulated to fluorescence or phosphorescence (luminescence) can be detected visually if they are irradiated with UV light. 

However, the direct determination of absorption at the wavelength of maximum absorption is more sensitive (or in the worst case at least as sensitive) as the indirect measurement of absorption by fluorescence or phosphorescence quenching. 

Both types of processes, 7r -assisted y, -bond cleavage and P -bonding, have been invoked to operate in the phototransformations of the aldehyde-ketone (153) to products (155), (156) and (158). The conversions have been observed at room temperature in dioxane, t-butanol, ethanol and benzene using light of wavelengths 2537 A or above 3100 A or sensitization by acetophenone. The phosphorescing excited triple state of (153) is very similar to that of testosterone acetate (114), but its reactions are too rapid... 

UV/VIS absorption spectroscopy, pioneered by Beckman (1941), is one of the oldest and most widely used instrumental techniques, despite being regarded by some analysts as obsolete. Recently there has been a renaissance in UV spectroscopy with many new techniques, instruments and data processing methods [8]. Modem highest specification UV/VIS absorption and fluores-cence/phosphorescence spectrometer instruments extend their wavelength region from the far UV (175 nm) into the NIR region (1100 nm). Small footprint UV/VIS spectrometers (200-1100 nm) are now available. Paul [9] has traced the history of UV/VIS instrumental developments. 

Stabilisers are usually determined by a time-consuming extraction from the polymer, followed by an IR or UV spectrophotometric measurement on the extract. Most stabilisers are complex aromatic compounds which exhibit intense UV absorption and therefore should show luminescence in many cases. The fluorescence emission spectra of Irgafos 168 and its phosphate degradation product, recorded in hexane at an excitation wavelength of 270 nm, are not spectrally distinct. However, the fluorescence quantum yield of the phosphate greatly exceeds that of the phosphite and this difference may enable quantitation of the phosphate concentration [150]. The application of emission spectroscopy to additive analysis was illustrated for Nonox Cl (/V./V -di-/i-naphthyl-p-phcnylene-diamine) [149] with fluorescence ex/em peaks at 392/490 nm and phosphorescence ex/em at 382/516 nm. Parker and Barnes [151] have reported the use of fluorescence for the determination of V-phenyl-l-naphthylamine and N-phenyl-2-naphthylamine in extracted vulcanised rubber. While pine tar and other additives in the rubber seriously interfered with the absorption spectrophotometric method this was not the case with the fluoromet-ric method. 

In principle, measurement of the phosphorescence characteristics of samples obtained after extraction of polymers with organic solvents may also yield useful information regarding the nature and concentration of the additives present. Parker and Hatchard [157] have examined the possibilities of phosphorescence measurements for V-phenyl-2-naphthylamine. Although it should be possible to determine various analytes simultaneously by correct choice of ex and em wavelengths and phosphorescence decay, no pertinent reports are available. Phosphorescence finds limited application for the direct determination of additives in polymers (without prior extraction). 

Most dyes and pigments owe their colour to the selective absorption of incident light. In some compounds, colour can also be observed as a result of the emission of visible light of specific wavelengths. These compounds are referred to as luminescent. The most commonly encountered luminescent effects are fluorescence and phosphorescence. The transitions which can occur in a molecule exhibiting either fluorescence... 

For compounds that are very weakly phosphorescent or that phosphoresce at wavelengths out of the normal range of sensitivity of the spectrometer this method of triplet energy determination cannot be applied. For these compounds triplet energies can sometimes be determined by measuring their E-type or P-type delayed fluorescence. 

---