Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Water-assist molding

Juntgen, T., et al., The Water Injection Molding Technique (WIT) as an Attractive Alternative and Supplement to Gas-Assisted Injection Molding (GAIM), SPE ANTEC, 2002. [Pg.583]

Liu, S.-J. Chen, Y.-S. Water-assisted injection molding of thermoplastic materials effects of processing parameters. Polym. Eng. Sci. 2003, 43, 1806-1817. [Pg.1409]

S.-J. liu, W.-R. Lin, K.-Y. Lin, Morphological development in water assisted injection molded polyethylene/polyamide-6 blends. Polym. Adv. Technol. 22, 2062-2068 (2011)... [Pg.152]

Scanning electron micrographs (SEMs) of (a) inner layer, (b) core region, and (c) outer layer at two positions of water-assisted injection-molded polypropylene (PP)/polyamide-6 (PA-6) blend. Water pressure, 10 MPa melt temperature, 270°C injection speed, 50%. (Reproduced from Huang, H.-X., and Zhou, R.-H. 2010. Preliminary investigation on morphology in water-assisted injection molded polymer blends. Polymer Testing 29 235-244 with permission from Elsevier.)... [Pg.20]

Huang, H.-X., and Zhou, R.-H. 2010. Rreliminary investigation on morphology in water-assisted injection molded polymer blends. Polymer Testing 29 235-244. [Pg.25]

S. J. Liu and Y. S. Chen, The manufacture of thermoplastic composites by water assisted injection molding technology. Composites Part A Applied Science and Manufacture, 35,171—180 (2004). [Pg.42]

S. J. Liu and C. C. Shih, Water assisted injection molding of glass fiber reinforced Nylon-6 composites, Journal of Reinforced Plastics and Composites, 27, 985-999 (2008). [Pg.43]

S. J. Liu, M. J. Lin and Y. C. Wu, An experimental study of the water-assisted injection molding of glass fiber filled polybutylene terephthalate (PBT) composites, Composites Science and Technology, 67,1415-1424 (2007). [Pg.43]

S. J. Liu, Water assisted injection molding areview. International Polymer Processing, 14, 315-325 (2009). [Pg.43]

There are different gas-assist injection molding (GAIM) processes. Other names exist that include injection molding gas-assist (IMGA), gas injection molding (GIM), or injection gas pressure (IGP). Most of the gas-assisted molding systems are patented. This review concerns the use of gas, however there are others such as water-assist injection molding. [Pg.36]

COMPARISON OF CRYSTALLIZATION BETWEEN WATER-ASSISTED AND GAS-ASSISTED INJECTION MOLDING PART OF SEMICRYSTALLINE POLYMER BASED ON NUMERICAL SIMULATION... [Pg.264]

Numerical simulation, crystallization, water-assisted injection molding, gas-assisted injection molding. [Pg.267]

DEVELOPMENTS IN WATER ASSISTED INJECTION MOLDING PROCESS... [Pg.1820]

Protte, R., et al. Water-Assist Injection Molding - An Innovative Process Technology for Productivity Improvement Developments in Processing, Equipment, and Materials. SPE ANTEC Proceedings, 0750,2003. [Pg.3016]

Overflow tabs have been used throughout the plastics industry for several applications. They are used in the injection molding industry for the improvement of weld line strength of filled materials, but showed very little success [1]. They have also been used to increase the gas/liquid channel in gas-assist [2], liquid-gas assist [3], and water-assist [4] to provide a more uniform wall thickness and reduce material usage. [Pg.3033]

A newly-developed water injection system and emulated mold were built to investigate the melt flow patterns dining water-assisted melt filling. The experimental results show the forming of fountain flow in water-assisted melt filling. [Pg.3049]


See other pages where Water-assist molding is mentioned: [Pg.211]    [Pg.211]    [Pg.580]    [Pg.1406]    [Pg.1821]    [Pg.211]    [Pg.211]    [Pg.580]    [Pg.1406]    [Pg.1821]    [Pg.249]    [Pg.139]    [Pg.209]    [Pg.211]    [Pg.212]    [Pg.304]    [Pg.19]    [Pg.17]    [Pg.22]    [Pg.44]    [Pg.492]    [Pg.692]    [Pg.231]    [Pg.264]    [Pg.264]    [Pg.1820]    [Pg.1820]    [Pg.1821]    [Pg.1822]    [Pg.1822]    [Pg.3014]    [Pg.3048]    [Pg.3048]    [Pg.3048]   


SEARCH



Water molds

© 2024 chempedia.info