Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Waste products acids

Thus, calcium fluoride becomes the end waste product. Acid-free process wastewater that may include rainwater from the acid-free area of the units is directed to wastewater treating systems. As a general rule there are no nonacid liquid hydrocarbon waste streams. [Pg.670]

Uronic acids are biosynthetic intermediates m various metabolic processes ascorbic acid (vitamin C) for example is biosynthesized by way of glucuronic acid Many metabolic waste products are excreted m the urine as their glucuronate salts... [Pg.1055]

Essentially no waste products are formed ia the USP process if hydriodic acid and either sodium hydroxide or sodium carbonate are used as reactants. Water results from use of the former a mole equivalent quantity of carbon dioxide is produced from the latter reagents. Higher quaUty grades may require some purification steps which may result ia wastes from the treatment. Disposal of these impurities must then be carried out. [Pg.190]

Paints. Paints account for perhaps 3% of sulfur consumption (see Paint). The main sulfur use is for the production of titanium dioxide pigment by the sulfate process. Sulfuric acid reacts with ilmenite or titanium slag and the sulfur remains as a ferrous sulfate waste product. Difficulties with this process have led to the development of the chloride process (see Pigments, inorganic Titanium compounds). [Pg.125]

Nonferrous Metal Production. Nonferrous metal production, which includes the leaching of copper and uranium ores with sulfuric acid, accounts for about 6% of U.S. sulfur consumption and probably about the same in other developed countries. In the case of copper, sulfuric acid is used for the extraction of the metal from deposits, mine dumps, and wastes, in which the copper contents are too low to justify concentration by conventional flotation techniques or the recovery of copper from ores containing copper carbonate and siUcate minerals that caimot be readily treated by flotation (qv) processes. The sulfuric acid required for copper leaching is usually the by-product acid produced by copper smelters (see Metallurgy, extractive Minerals RECOVERY AND PROCESSING). [Pg.125]

In sulfuric acid production involving heat recovery and recovery of waste sulfuric acid, acids of various concentrations at high temperatures can be dealt with. Corrosion damage has been observed, for example, in sulfuric acid coolers, which seriously impairs the availability of such installations. The use of anodic protection can prevent such damage. [Pg.478]

Acetogenic bacterium Prokaryotic organism that uses carbonate as a terminal electron acceptor and produces acetic acid as a waste product. [Pg.601]

FIGURE 5.13 Two basic types of biological transport are (a) transport within or between different cells or tissues and (b) transport into or out of cells. Proteins function in both of these phenomena. For example, the protein hemoglobin transports oxygen from the lungs to actively respiring tissues. Transport proteins of the other type are localized in cellular membranes, where they function in the uptake of specific nutrients, such as glucose (shown here) and amino acids, or the export of metabolites and waste products. [Pg.123]

The combustion of the acetyl groups of acetyl-CoA by the citric acid cycle and oxidative phosphorylation to produce COg and HgO represents stage 3 of catabolism. The end products of the citric acid cycle, COg and HgO, are the ultimate waste products of aerobic catabolism. As we shall see in Chapter 20, the oxidation of acetyl-CoA during stage 3 metabolism generates most of the energy produced by the cell. [Pg.574]

Pedaling at the rate shown to be most efficient uses up blood glucose the fastest. This leaves the rider more susceptible to that sudden loss of energy known as the bonk, and it also tends to leave more lactic acid and other waste products in the muscles, increasing discomfort and extending recoveiy time. [Pg.150]

An example where reactant concentration is solely governed by corrosion considerations is in the production of concentrated nitric acid by dehydration of weak nitric acid with concentrated sulphuric acid. The ratio of HN0j H2S04 acid feeds is determined by the need to keep the waste sulphuric acid at > 70 Vo at which concentrations it can be transported in cast-iron pipes and stored after cooling in carbon-steel tanks. [Pg.16]

In metabolic terms there are three dearly distinguishable types of compound to deal with. Firstly, compounds which are obviously waste products - end products of one or more pathways which would normally be excreted from the cell (for example lactic acid). Secondly, compounds which are end products of pathways but which are not waste products and whose synthesis is normally very carefully controlled (for example amino adds). Thirdly, compounds which are intermediates of pathways and hence not normally considered as end products or wastes at all (for example ritric add). [Pg.117]

In one approach cyclohexane is autoxidized to a mixture of cyclohexanol and cyclohexanone in the presence of a Co or Mn naphthenate catalyst. This mixture is subsequently oxidized to adipic acid using nitric acid as the oxidant in the presence of a Cu Vv catalyst. An alternative method using dioxygen in combination with Co or Mn in HOAc gives lower selectivities to adipic acid (70% vs 95%). Alternatively, autoxidation in the presence of stoichiometric amounts of boric acid produces cyclohexanol as the major product, which is subsequently oxidized to adipic acid using HNO3 in the presence of Cu Vv. The latter step produces substantial amounts of N2O as a waste product. [Pg.299]

Although very corrosive, it can be stored and shipped in steel or common alloys at commercial concentrations. In some chemical processes, it is used simply as an acid while in others it is used as a dehydrating agent to remove water, as an agent to increase the rate of a chemical reaction (catalyst), or as a solvent for reactions in which it remains unchanged. It rarely ends up in the final product. Waste sulfuric acid can be recycled. [Pg.18]

Particularly, some newly developed drags, which incorporate the N-acyl sulfonamide moiety [8-10], are synthesized from the parent sulfonamides, by their coupling with acid chlorides or carboxylic anhydrides in basic conditions [11-15]. Unfortunately all these methods lead to substantial waste products. Less common reports mentioning this transformation under acidic conditions (Bronsted or Lewis acids) do not systematically examine the purpose and limitations of the reaction [16]. [Pg.425]

The principal function of the circulatory system is to supply oxygen and vital metabolic substrates to cells throughout the body, as well as removal of metabolic waste products. Circulatory shock is a life-threatening condition whereby this principal function is compromised. When circulatory shock is caused by a severe loss of blood volume or body water it is called hypovolemic shock, the focus of this chapter. Regardless of etiology, the most distinctive manifestations of hypovolemic shock are arterial hypotension and metabolic acidosis. Metabolic acidosis is a consequence of an accumulation of lactic acid resulting from tissue hypoxia and anaerobic... [Pg.195]

Gout is caused by an abnormality in uric acid metabolism. Uric acid is a waste product of the breakdown of purines contained in the DNA of degraded body cells and dietary protein. Uric acid is water soluble and excreted primarily by the kidneys, although some is broken down by colonic bacteria and excreted via the gastrointestinal tract. [Pg.891]

Sometimes, scientists just get it wrong. That certainly seems to be the case with lactic acid and exercise. For more than a century, lactic acid was seen as the "bad boy" of exercise. People believed that intense, unaccustomed exercise made lactic acid build up in muscles and made them burn and eventually tire and give out. Some athletes even went as far as to have the lactic acid level in their blood tested. Everyone considered lactic acid a toxic waste product. As it turns out, that is not true. [Pg.82]


See other pages where Waste products acids is mentioned: [Pg.206]    [Pg.251]    [Pg.274]    [Pg.278]    [Pg.125]    [Pg.183]    [Pg.422]    [Pg.449]    [Pg.2127]    [Pg.296]    [Pg.120]    [Pg.3]    [Pg.117]    [Pg.117]    [Pg.119]    [Pg.7]    [Pg.245]    [Pg.256]    [Pg.257]    [Pg.224]    [Pg.443]    [Pg.572]    [Pg.433]    [Pg.183]    [Pg.425]    [Pg.769]    [Pg.368]    [Pg.645]    [Pg.142]    [Pg.1193]    [Pg.86]   
See also in sourсe #XX -- [ Pg.163 ]




SEARCH



Acidic wastes

Metallurgical offgas waste acid product from

Waste production 240

Waste products

© 2024 chempedia.info