Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Using Paste List

The Paste List command is useful for worksheet auditing and error tracing. It produces a list of all names used in the worksheet, with their references. [Pg.88]

Select the upper-left comer of the range in which you want the list to appear make sure that nothing will be over-written by the list. Choose Name... from the Insert menu and choose Paste... from the submenu, then press the Paste List button. [Pg.89]

Sorting the list according to reference makes it easier to find duplications. [Pg.89]


Figure 3-24. Using Paste List to audit a worksheet. Figure 3-24. Using Paste List to audit a worksheet.
The check list method is based on past experience. The process description, the operating mode, is screened using a list of possible failures or deviations from this particular operating mode. Thus, it is obvious that the quality and comprehensiveness of the check list directly govern its efficiency. Indeed, the experience of the authors confirms that the check list is essential. This method is well adapted to discontinuous processes as practised in the fine chemicals and pharmaceutical industries, where processes are often performed in multi-purpose plants. The basic document for the hazard identification is the process description, also called operating mode. Each step of the process is analysed with the check list. [Pg.21]

The procedure employed for developing the new list is different than previous methods. Candidate chemicals and hazardous substances other than oil were not taken from all known spill priority lists but only from materials known to have been spilled in the past 15 years. This was done to eliminate the possibility that chemicals that have never been spilled or have a low spill potential might be present on the new priority list, as occurred in the past list. The problem is that many lists contain materials that have no spill history. This is because these chemicals may not be transported or consumed in the form noted on the particular priority list, they may be a degradation or reaction product, or they may not be used commercially at the present time. Furthermore, there is an extensive spill history at this time, as evidenced by a sizeable database, and substances that have a potential for spillage are likely to be listed. Few new chemicals appear to be produced in high volumes. [Pg.956]

It will be useful to list the fluid in each row. Enter the column heading fluid in cell F8. Type water into cell F9 then copy and paste into cells FIO through F20. [Pg.300]

There are several types of basis functions listed below. Over the past several decades, most basis sets have been optimized to describe individual atoms at the EIF level of theory. These basis sets work very well, although not optimally, for other types of calculations. The atomic natural orbital, ANO, basis sets use primitive exponents from older EIF basis sets with coefficients obtained from the natural orbitals of correlated atom calculations to give a basis that is a bit better for correlated calculations. The correlation-consistent basis sets have been completely optimized for use with correlated calculations. Compared to ANO basis sets, correlation consistent sets give a comparable accuracy with significantly fewer primitives and thus require less CPU time. [Pg.85]

Formulator s Dilemma. The regulatory discussion included a listing of solvents designated as HAP compounds. Emissions of these solvents are to be significantly reduced. For many appHcations this means that less is to be allowed. In a situation where the allowed VOC emission levels are also being reduced, the formulator would like to use the most effective solvents available. In the past, MEK and MIBK were frequently used as active solvents and aromatic hydrocarbons as diluents. These solvents have been popular because they are cost-effective. [Pg.279]

The type of evaporator to be used and the materials of construc tion are generally selected on the basis of past experience with the material to be concentrated. The method of feeding can usually be decided on the basis of known feed temperature and the properties of feed and produc t. However, few of the listed variables are completely independent. For instance, if a large number of effects is to be used, with a consequent low temperature drop per effect, it is impractical to use a natural-circiilation evaporator. It expensive materials of construction are desirable, it may be found that the forced-circulation evaporator is the cheapest and that only a few effec ts are justifiable. [Pg.1146]

Listed below are eompanies that have provided hardware, serviees, information, or data used by the authors in eonjunetion with work involving turboexpanders. Their past and present eontributions are gratefully aeknowledged. [Pg.489]

Against this background of the changed economics of plant performance, we consider some of the many new gas turbine plants that have been proposed over the past few years. In this section, we first formulate a list and classify these plants (and the cycles on which they are based), as in Tables 8.1A-D, noting that most but not all use natural gas as a fuel. [Pg.132]

The atmospheric corrosion data in Table 4.34 (and also Table 13.8) is related to historic environments. Current use in the industrial areas listed with acidic pollution would show much lower corrosion rates as the corrosion of zinc in the atmosphere is essentially related to the SOj content (and the time of wetness) and in many countries the sulphurous pollution has been greatly reduced in the past 20 years. Zinc also benefits from rainwater washing to remove corrosive poultices thus, although initial corrosion rates are usually not very different on upper and lower surfaces, the latter tend —with time—to become encrusted with corrosion products and deposits and these are not always protective. [Pg.826]

Sulfosuccinates have a history of safety as their use in consumers products in the past years has proven. However, few toxicity data can be found in the literature, mostly in connection with the evaluation of other surfactants. As the figures show, all sulfosuccinates and sulfosuccinamates described in this chapter have an acute oral toxicity (LD50) of >2000 mg/kg. Results are listed in Table 20. [Pg.535]

In the past 20 years, consumers have increasingly considered synthetic colorants undesirable or harmful but they are still used extensively in many food products. Official organizations in the United States and European Union have restricted the use of some synthetic colorants as additives in foods (see Table 7.3.1 in Section 7.3). The list of allowed colorants has been reduced to 21. Section 7.3 also discusses details about their structures. [Pg.533]


See other pages where Using Paste List is mentioned: [Pg.88]    [Pg.90]    [Pg.88]    [Pg.90]    [Pg.347]    [Pg.367]    [Pg.261]    [Pg.249]    [Pg.472]    [Pg.103]    [Pg.377]    [Pg.377]    [Pg.1048]    [Pg.883]    [Pg.2745]    [Pg.473]    [Pg.245]    [Pg.452]    [Pg.483]    [Pg.487]    [Pg.290]    [Pg.111]    [Pg.597]    [Pg.321]    [Pg.261]    [Pg.411]    [Pg.793]    [Pg.180]    [Pg.119]    [Pg.540]    [Pg.321]    [Pg.36]    [Pg.358]    [Pg.132]    [Pg.271]    [Pg.140]    [Pg.59]   


SEARCH



Paste List

Use Lists

© 2024 chempedia.info