Unsaturated hydrocarbons, catalytic

For environmental reasons, burning should be smokeless. Long-chain and unsaturated hydrocarbons crack in the flame producing soot. Steam injection helps to produce clean burning by eliminating carbon through the water gas reaction. The quantity of steam required can be as high as 0.05—0.3 kg steam per kg of gas burned. A multijet flare can also be used in which the gas bums from a number of small nozzles parallel to radiant refractory rods which provide a hot surface catalytic effect to aid combustion. 

In several papers dealing with catalytic reactions involving hydrogen and unsaturated hydrocarbons the observed self-poisoning of nickel or its alloys has been quite properly attributed to the presence of carbonaceous... 

Both heterogeneous and homogeneous catalysts have been found which allow the hydroamination reaction to occur. For heterogeneously catalyzed reactions, it is very difficult to determine which type of activation is involved. In contrast, for homogeneously catalyzed hydroaminations, it is often possible to determine which of the reactants has been activated (the unsaturated hydrocarbon or the amine) and to propose reaction mechanisms (catalytic cycles). 

The fourth chapter gives a comprehensive review about catalyzed hydroamina-tions of carbon carbon multiple bond systems from the beginning of this century to the state-of-the-art today. As was mentioned above, the direct - and whenever possible stereoselective - addition of amines to unsaturated hydrocarbons is one of the shortest routes to produce (chiral) amines. Provided that a catalyst of sufficient activity and stabihty can be found, this heterofunctionalization reaction could compete with classical substitution chemistry and is of high industrial interest. As the authors J. J. Bmnet and D. Neibecker show in their contribution, almost any transition metal salt has been subjected to this reaction and numerous reaction conditions were tested. However, although considerable progress has been made and enantios-electivites of 95% could be reached, all catalytic systems known to date suffer from low activity (TOP < 500 h ) or/and low stability. The most effective systems are represented by some iridium phosphine or cyclopentadienyl samarium complexes. 

The reaction described is of considerable general utility for the preparation of benzoyloxy derivatives of unsaturated hydrocarbons.2"8 Reactions of 2-butyl perbenzoate with various other classes of compounds in the presence of catalytic amounts of copper ions produce benzoyloxy derivatives. Thus this reaction can also be used to effect one-step oxidation of saturated hydrocarbons,9, 10 esters,6,11 dialkyl and aryl alkyl ethers,12 14 benzylic ethers,11,15 cyclic ethers,13,16 straight-chain and benzylic sulfides,12, 17-19 cyclic sulfides,11,19 amides,11 and certain organo-silicon compounds.20... 

Covering monometallic (Pd, Sn) and multimetallic (Pd-Sn, Pd-Ag) systems, several examples are presented in this chapter to illustrate the possibility offered by this chemistry to control the particle size distribution and the bimetallic interaction at a molecular level. This work is supported by a multitechnique characterization approachusing SnM6ssbauerspectroscopy,X-rayphotoelectron spectroscopy (XPS), low-energy ion spectroscopy (LEIS), and transmission electron microscopy (TEM). Catalytic performances in hydrogenation of different unsaturated hydrocarbons (phenylacetylene, butadiene) are finally discussed in order to establish structure-reactivity relationships. 

The reactions studied were the catalytic formation of methane from carbon monoxide and hydrogen (according to Sabatier (34), normal pressure), the catalytic hydrogenation of unsaturated hydrocarbons and also of unsaturated fatty acids ( fat hardening according to Normann (35)). Here again, a certain analogy was established between... 

Hydrogen undergoes catalytic hydrogenation adding to unsaturated hydrocarbons, such as alkenes and alkynes forming alkanes. The reaction is catalyzed by nickel, platinum or palladium catalysts at ambient temperature. Hydrogenation of benzene over platinum catalyst yields cyclohexane, C6H12. 

One of the most important apphcations of palladium is to catalyze hydrogenation, dehydrogenation, and petroleum cracking. Such reactions are widely employed in organic syntheses and petroleum refining. Palladium and platinum are installed in catalytic converters in automobiles to cut down the emission of unsaturated hydrocarbon gasses. 

Experimental observations indicate that the oxidation of cobalt (II) to cobalt (III) and the formation of ethylenediamine from N-hydroxyethylethylene-diamine occur simultaneously. This is quite the opposite to what is usually assumed in other instances of transition metal catalysis of organic reactions—for example, the catalytic effect of manganese in the oxidation of oxalic acid (7, 8), of iron in the oxidation of cysteine to cystine (22) and of thioglycolic acid to dithioglycolic acid (5, 23), of copper in the oxidation of pyrocatechol to quinone and in the oxidation of ascorbic acid (29, 30), and of cobalt in the oxidation of aldehydes and unsaturated hydrocarbons (4). In all these reactions the oxidation of the organic molecule occurs by the abstraction of an electron by the oxidized form of the metal ion. 

The second approach is that developed to interpret the products of the reactions of octalins with deuterium [144] and is equally applicable to the reactions of mono- or di-unsaturated hydrocarbons with deuterium. Smith and Burwell [144] pointed out that, whereas the experimental deuterohydrocarbon distributions are obtained in terms of the number of deuterium atoms in the product hydrocarbon, the quantities of fundamental importance to the discussion of the mechanisms of catalytic reactions are the fractions of the hydrocarbon sample which have equilibrated with the surface deuterium—hydrogen pool. Thus, for example, in the reaction of buta-1 3-diene with deuterium, the product butenes consist of a series of species, butene-(/i, d)2, -(h, d)3,..., -(h, d)n in which 2,3. .., n positions... 

The type of catalyst most commonly used in studies of the hydrogenation of unsaturated hydrocarbons is one in which the metal is dispersed upon a support such as alumina or silica. Although for many years it was generally thought that the support was catalytically inert, studies over the past few years have suggested that this may not be the case and there is a growing body of evidence to suggest that the support may influence the... 

Respect to olefins/parafFins ratio, it can be mentioned that the it electron bonds present in the unsaturated hydrocarbons can interact with the surface electrons of the carbon microdomains these surface electrons act as hydrogenation catalyst in the same way that Platinum surface electrons act in conventional catalytic hydrogenation processes The observed values of olefins/paraffins ratio decrease from CON to C-155, and practically olefins are not present as a product when C-155 is used, suggesting for the new developed materials the presence of high electronic densities surrounding the carbon microdomains. 

The Metathesis of Unsaturated Hydrocarbons Catalyzed by Transition Metal Compounds J. C. Mol and J. A. Moulijn One-Component Catalysts for Polymerization of Olefins Yu. Yermakov and V. Zakharov The Economics of Catalytic Processes J. Dewing and D. S. Davies Catalytic Reactivity of Hydrogen on Palladium and Nickel Hydride Phases... 

---