Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

3-Trimethylsilyloxy

Oxazoles preferred in practice bear 5-ethoxy- or 5-cyanosubstituents. Other alkoxy (39—42), trimethylsilyloxy (43), alkythio (44), amino (45), and... [Pg.69]

Potential 2,5-dihydroxy compounds (185) exist in the dicarbonyl forms (186). Succinic anhydride (186 Z = O) on silylation is converted into 2,5-bis(trimethylsilyloxy)furan (187) the latter compound readily participates in Diels-Alder addition reactions (80TL3423). Reaction of thiosuccinic anhydride (186 Z = S) with the triphenylphosphorane Et02CH=PPh3 gives a product which exists in the aromatic form (188) (75LA1967). [Pg.77]

Strong acid treatment of 2-(trimethylsilyloxy)-5-methoxycarbonylisoxazolidine (183) produced (184) <78ACS(B)118). [Pg.47]

Furan, 2,5-bis(trimethylsilyloxy)-cycloaddition reactions, 4, 625 Diels-Alder reactions, 4, 77 synthesis, 1, 417 Furan, bromo-dipole moments, 4, 553 Furan, 2-bromo-electron diffraction, 4, 537 reactions, 4, 78 synthesis, 4, 604 Furan, 3-bromo-electron diffraction, 4, 537 Furan, 2-bromomethyl-5-nitro-reactions... [Pg.629]

Pteridine, 2,4-bis(trimethylsilyloxy)-synthesis, 3, 297 Pteridine, 7-/-butyl-oxidation, 3, 305 Pteridine, 2-chloro-hydrolysis, 3, 291 Pteridine, 6-chloro-structure, 3, 266 Pteridine, 7-chloro-reactions, 3, 291 structure, 3, 266... [Pg.751]

Trimethylsilyloxy-3-penten-2-one cis) (acetylacetone enol trimethylsilyl ether) [13257-81-3 M 172.3, b 66-68"/4mm, 61-63"/5mm, d4 0.917, Up 1.452. Fractionally distilled and stored in glass ampoules which are sealed under N2. It hydrolyses readily in contact with moisture giving, as likely impurities, hexamethyldisiloxane and 2,4-pentanedione. [J Am Chem Soc 80 3246 795S.]... [Pg.491]

Trimethylsilyloxy-p-nitrostyrene was the target of Knoevenagel condensation of 2-trimethyl-siloxybenzaldehyde with nitromethane in the presence of -butylamine as base. NMR spectra 20 were obtained from the product of the reaction. What has happened ... [Pg.90]

A similar transformation results when trimethylsilyloxy-substituted allylic halides react with silver perchlorate in nitromethane. The resulting allylic cation gives cycloaddition reactions with dienes such as cyclopentadiene. The isolated products result from desilyla-tion of the initial adducts ... [Pg.645]

The nueleophilic displacement of 9-methoxy group of perhydropyr-ido[l,2-c][l,3]oxazin-l-ones 94 was performed by treatment with an excess of 2-(trimethylsilyloxy)but-l-ene in the presence of TiCU to give 9-(2-oxobutyl) derivatives 96 (96CJC2434). The high stereoselectivity observed in... [Pg.241]

The asymmetric synthesis of (4i ,9S, 9ai )-4-phenyl-l-trimethylsilyloxy-9-vinylperhydropyrido[2,l-c][l,4]oxazine by a high level of stereoselectivity in the cyclization of (3i ,5i )-5-phenyl-3-phenylsulfanyl-4-(6-trimethylsila-nylhex-4-enyl)-2-trimethylsilyloxymorpholine was rationalized via AMI calculations (98T10309). [Pg.268]

Treatment of an epimeric mixture of 4-substituted 2-(trimethylsilyloxy)-5-phenyl-3-phenylthio-l,4-oxazine 264 with ZnBr2 led to the stereoselective formation of perhydropyrido[2,l-c][l,4]oxazine 266 via the iminium ion 265 by the phenyl bearing stereocenter directed addition of the olefinic double bond from the /S-face of the cyclic moiety (97SL799, 98T10309). Similarly, an epimeric mixture of (45,9aS)-l-trimethylsilyloxy-4-phenyl-3,4,6,7-tetra-hydropyrido[2,l-c][l,4]oxazine was prepared by cyclization of (Z)-5(S)-phenyl-3-phenvlsulfanyl-2-trimethylsilyloxy-4-[4-(trimethylsilyl)but-3-enyll morpholine (OOSC2565). [Pg.280]

There have been few mechanistic studies of Lewis acid-catalyzed cycloaddition reactions with carbonyl compounds. Danishefsky et ah, for example, concluded that the reaction of benzaldehyde 1 with trans-l-methoxy-3-(trimethylsilyloxy)-l,3-di-methyl-1,3-butadiene (Danishefsky s diene) 2 in the presence of BF3 as the catalyst proceeds via a stepwise mechanism, whereas a concerted reaction occurs when ZnCl2 or lanthanides are used as catalysts (Scheme 4.3) [7]. The evidence of a change in the diastereochemistry of the reaction is that trans-3 is the major cycloaddition product in the Bp3-catalyzed reaction, whereas cis-3 is the major product in, for example, the ZnCl2-catalyzed reaction - the latter resulting from exo addition (Scheme 4.3). [Pg.154]

Yamamoto et al. were probably the first to report that chiral aluminum(III) catalysts are effective in the cycloaddition reactions of aldehydes [11]. The use of chiral BINOL-AlMe complexes (R)-S was found to be highly effective in the cycloaddition reaction of a variety of aldehydes with activated Danishefsky-type dienes. The reaction of benzaldehyde la with Danishefsky s diene 2a and traws-l-methoxy-2-methyl-3-(trimethylsilyloxy)-l,3-pentadiene 2b affords cis dihydropyrones, cis-3, as the major product in high yield with up to 97% ee (Scheme 4.6). The choice of the bulky triarylsilyl moiety in catalyst (J )-8b is crucial for high yield and the en-antioselectivity of the reaction in contrast with this the catalysts derived from AlMe3 and (J )-3,3 -disubstituted binaphthol (substituent = H, Me, Ph) were effective in stoichiometric amounts only and were less satisfactory with regard to reactivity and enantioselectivity. [Pg.156]

Node and co-workers have found that the Diels-Alder reaction of nitroalkenes v/ith 1-methoxy-3-trimethylsilyloxy-l,3-butadiene (Danishefsky s dienesi exhibit abnormal exo-se-lecdvity Electrostadc repulsion between the nitro and the silyloxy group of the diene induces this abnormal exc-selecdvity (Tq 8 10 This selecdve reacdon has been used for the asymmetric synthesis of various naniral products as shovm in Scheme 8 6... [Pg.235]

Still s synthesis of monensin (1) is based on the assembly and union of three advanced, optically active intermediates 2, 7, and 8. It was anticipated that substrate-stereocontrolled processes could secure vicinal stereochemical relationships and that the coupling of the above intermediates would establish remote stereorelationships. Scheme 3 describes Still s synthesis of the left wing of monensin, intermediate 2. This construction commences with an aldol reaction between the (Z) magnesium bromide enolate derived from 2-methyl-2-trimethylsilyloxy-3-pentanone (21) and benzyloxymethyl-protected (/ )-/ -hydroxyisobutyraldehyde (10).2° The use of intermediate 21 in aldol reactions was first reported by Heathcock21 and, in this particular application, a 5 1 mixture of syn aldol diastereoisomers is formed in favor of the desired aldol adduct 22 (85% yield). The action of lithium diisopropylamide (LDA) and magnesium(n) bromide on 21 affords a (Z) magnesium enolate that... [Pg.235]

The nucleophilic alkenoylation of a-phenyl-substituted aldehydes and ketones with (methyl-substituted) [l-cyano-l-(trimethylsilyloxy)-2-propenyl]lithium proceeds with good 1,2-induction to afford the j> i-hydroxy ketones109. [Pg.243]

To 5.4 mmol of LDA, prepared in 25 mL of diethyl ether from diisopropylamine and 2 M butyllithium in hexane, are added 847 mg (5.00 mmol) of 2-(trimethylsilyloxy)-3-pentenenitrile in 10 mL of diethyl ether at — 78 "C. After stirring for 45 min, 671 mg (5.00 mmol) of 2-phenylpropanal, dissolved in 10 mL of diethyl ether are added. After stirring for 2 h at — 78 X, 1.20 g (10.5 mmol) of trifluoroacetie acid are added carefully to the mixture at below —70CC. 15 mL of sat. aq NH4C1 and then diethyl ether are added and the reaction mixture is allowed to reach r.t. The phases are separated and extracted with aq NH,CI and... [Pg.243]

To a stirred solution of 5.70g (21.1 mmol) of 4,4.5,5-tetramethyl-2[(5)-(A)-3-(trimethylsilyloxy)-l-bulenyl]-l, 3,2-dioxaborolane in 130 mL of petroleum ether (bp 40-60 C) are added ca. 20 mg of cobalt(II) nitrate hexahydrale followed immediately by 2.75 g (23.1 mmol) of freshly distilled thionyl chloride. Slow evolution of sulfur dioxide ceases after 4h. The mixture is then filtered and concentrated in vacuo at r.t. to give crude 15, which is taken up in 50 mL of petroleum ether and washed with 30-mL portions of buffer (pH 5) until the pH is constant. 100 mL of brine are added to the organic phase and the pH is adjusted to 7 by addition of sat. aq NaHCO,. The pH should not exceed 7, otherwise decomposition ensues. The phases are separated and the organic phase is dried with MgS04 and concentrated at r.t. to give 15 yield 4.39 g (96%) Contact of 15 with metal surfaces should be avoided. [Pg.316]

Hydroxy-3-trimethylsilyloxy-4-alkanones (2 a) by Magnesium-Mediated Addition of (5)-5,5-Dimethyl-4-trimcthylsiloxy-3-hcxanonc to Aldehydes General Procedures,b ... [Pg.471]

Chelation control, as indicated in 5, is also a suitable model for rationalizing the stereochemical outcome of titanium tetrachloride mediated additions of 3,3-dimelhyl-2-trimethylsilyl-oxy-l-butenc (6) or l-methoxy-2-methyl-l-trimethylsilyloxy-l-propene (7) to 3-benzyloxy-2-methylpropanal (4). In both cases, there is almost exclusive formation of the chelate-controlled product (95 5 and >97 3, respectively)13. [Pg.568]

Chelation control also occurs in the reaction of (S -benzyloxybutanal with the bis(enol) ether 2,3-bis(trimethylsilyloxy)-2-butene3. [Pg.569]

The Lilanium(lV) chloride mediated reactions of the silylketene acetal, l-methoxy-2-methyI-l-trimethylsilyloxy-l-propene. with a-methylthioaldehydes afford predominantly adducts resulting from chelation control, besides minor amounts of the diastereomers10. [Pg.569]

The naphthyl derived ligand, (5)-1-mcthyl-2-[(l-naphthylamino)methyl]pyrrolidine (4) is especially effective in the stereoselective additions of (Z)-l-cthylthio-l-trimethylsilyloxy-l-propene to aldehydes. Thus, quantitative formation of. yyn-adducts is achieved, in addition to high reagent-induced stereoselectivity (>98% ee for the 3-hydroxy thioester products)23 32. [Pg.580]

The (Z)-configuration of the enol ether however is a prerequisite for both high. yyn-selecting and high optical purity of the products23. When, on the other hand, (Z)-2-benzyloxy-l-ethyl-thio-l-trimethylsilyloxy-l-propene is allowed to react with 2-propional in the presence of the diamine 2, the anti-aldol product is obtained in 92% ee42. [Pg.581]

When a mixture of aldehydes and (Z)-l-ethylthio-l-trimethylsilyloxy-l-propene is added slowly to a solution of tin(Il) triflate and 10-20 mol% of the chiral diamine 4 in acetonitrile, /1-silyloxy thioesters 5 are obtained in high simple diastereoselection and induced stereoselectivity. Thus, the chiral auxiliary reagent can be used in substoichiometric amount. A rationale is given by the catalytic cycle shown below, whereby the chiral tin(II) catalyst 6 is liberated once the complex 7 has formed33. [Pg.581]

In contrast, the titanium(IV)-catalyzed condensation of l-(trimethylsilyloxy)cydohexene and ( )-3-(2-nitro-l-propenyl)furan proceeded in the reverse stereochemical sense and gave three diastereomeric 1,2-oxazine 2-oxides lb, 2b and 3b in a ratio of 1 4 1. The major diastereomeric adducts 2b and lb were converted to the. syn-ketonc 4b upon hydrolysis16. [Pg.1016]

The analogous reaction with 1,1,3-trimethyl-2-(trimethylsilyloxy)cyclohexene employing titani-um(IV) as the Lewis acid also proceeded in the same stereochemical sense and gave 1,2-benzox-azin-2-ium 2-oxide 6 as the only diastereomeric product in 75% yield16. [Pg.1017]


See other pages where 3-Trimethylsilyloxy is mentioned: [Pg.297]    [Pg.69]    [Pg.631]    [Pg.753]    [Pg.441]    [Pg.491]    [Pg.1]    [Pg.2]    [Pg.128]    [Pg.506]    [Pg.116]    [Pg.254]    [Pg.236]    [Pg.223]    [Pg.231]    [Pg.315]    [Pg.819]    [Pg.1016]    [Pg.1017]   


SEARCH



0-Trimethylsilyloxy amines

1,3-butadiene 1-trimethylsilyloxy

1-Trimethylsilyloxy cyclohexene

1-Trimethylsilyloxy- -3-oxid

1.3- Dimethoxy-1 -trimethylsilyloxy-1,3-butadiene

2- Trimethylsilyloxy-1,3-cyclohexadienes

2- trimethylsilyloxy-l,3-butadiene

2-Methyl-3-trimethylsilyloxy-1 -propene

2-Trimethylsilyloxy-1,3-butadiene, reaction

2-Trimethylsilyloxy-l,3-butadiene, reaction

2-Trimethylsilyloxy-l,3-butadiene, reaction hydrogenation

2-Trimethylsilyloxy-l,3-butadiene, reaction oxazine

3- Trimethylsilyl-3-trimethylsilyloxy-l-propene

3-Methyl-3-trimethylsilyloxy-1 -butene

6-Nitro-7-trimethylsilyloxy

Additions 1 -trimethylsilyloxy-1,3-butadiene

Aldol reactions 1- trimethylsilyloxy-1,3-butadiene

Alkenes trimethylsilyloxy-substituted

Bromo- l-(trimethylsilyloxy)ethylene

Butyl-l-(trimethylsilyloxy)cyclohexene

Cyclizations 2- trimethylsilyloxy- 1,3-butadiene

Cycloadditions 1- trimethylsilyloxy- 1,3-butadiene

Danishefsky trimethylsilyloxy)dienes

Diethoxy-l,2-bis(trimethylsilyloxy)ethylene

Ethoxy- l-(trimethylsilyloxy)cyclopropane

Furans trimethylsilyloxy

Isocyanate, trimethylsilyloxy

Ketones, 0-trimethylsilyloxy

Ketones, 0-trimethylsilyloxy preparation

Ketones, p-trimethylsilyloxy from silicon compounds

L-Methoxy-3-trimethylsilyloxy-1,3-butadiene

Methoxy-2- methyl- l-(trimethylsilyloxy)propene

Methyl-2-(trimethylsilyloxy)-3-pentanone

Substitution trimethylsilyloxy-substituted alkene

Trans-1 -Methoxy-3-trimethylsilyloxy-1,3butadiene

Trimethylsilyl-3-trimethylsilyloxy- 1-propene

Trimethylsilyloxy)vinyllithium

Trimethylsilyloxy-1,3-butadienes, Diels-Alder

Trimethylsilyloxy-1,3-butadienes, Diels-Alder reaction

Trimethylsilyloxy-1,3-dienes

Trimethylsilyloxy-4-cyclohexene- 1, 2-dicarboxylate

© 2024 chempedia.info