Transmission technique, wave velocity

Radar techniques are based on the exploitation of three main properties of electromagnetic waves a) electromagnetic waves travel at the velocity of light so that the time interval between the transmission of a signal and its returning echo, divided by two and multiplied by the... 

Ultrasound reflective spectroscopy application in the analysis of bubbly liquids has been known for many years. This technique is based on the transmission of ultrasound waves through a dispersion, and measuring the velocity and attenuation spectra. 

CSIRO Minerals has developed a particle size analyzer (UltraPS) based on ultrasonic attenuation and velocity spectrometry for particle size determination [269]. A gamma-ray transmission gauge corrects for variations in the density of the slurry. UltraPS is applicable to the measurement of particles in the size range 0.1 to 1000 pm in highly concentrated slurries without dilution. The method involves making measurements of the transit time (and hence velocity) and amplitude (attenuation) of pulsed multiple frequency ultrasonic waves that have passed through a concentrated slurry. From the measured ultrasonic velocity and attenuation particle size can be inferred either by using mathematical inversion techniques to provide a full size distribution or by correlation of the data with particle size cut points determined by laboratory analyses to provide a calibration equation. 

In principle, the ultrasonic techniques described for solid-liquid flow measurement can be applied to measure air flow rate and particle velocity. Direct measurement of air flow rate by measuring upstream and downstream transit times has been demonstrated. But, the Doppler and cross-correlation techniques have never been applied to solid/gas flow because the attenuation of ultrasound in the air is high. Recent developments have shown that high-frequency (0.5-MHz) air-coupled transducers can be built and 0.5-MI Iz ultrasound can be transmitted through air for a distance of at least 1 in. Thus, the cross-correlation technique should be applicable to monitoring of solid/gas flow. Here, we present a new cross-correlation technique that does not require transmission of ultrasonic waves through the solid/gas flow. The new technique detects chiefly the noise that interacts with the acoustic field established within the pipe wall. Because noise may be related to particle concentration, as we discussed earlier, the noise-modulated sound field in the pipe wall may contain flow information that is related to the variation in particle concentration. Therefore, crosscorrelation of the noise modulation may yield a velocity-dependent correlation function. 

---