Thiophenols preparation

This preparation must be carried out in the fume cupboard since thiophenol has an extremely unpleasant and repulsive odour the sub-stance should not be allowed to come into contact with the hands or clothing since the odour clings for days. 

Aryl sulfides are prepared by the reaction of aryl halides with thiols and thiophenol in DMSO[675,676] or by the use of phase-transfer catalysis[677]. The alkenyl sulfide 803 is obtained by the reaction of lithium phenyl sulfide (802) with an alkenyl bromide[678]. 

The higher reactivity of 2-halogenothiazoles with respect to halogenopyridines can be related to the different aromaticity of the two systems, less for thiazole than for pyridine, for example, the relatively stronger fixation of the tt bond in the thiazole than in the case of pyridine. As the data reported in Table V-1 (footnote a) indicates, the free thiophenol is more reactive than the thiolate anion toward the 2-halogenothiazoles. This fact should be considered when one prepares the thiazolyl sulfides. 

Me3SiCH2CH=CH2i TsOH, CH3CN, 70-80°, 1-2 h, 90-95% yield. This silylating reagent is stable to moisture. Allylsilanes can be used to protect alcohols, phenols, and carboxylic acids there is no reaction with thiophenol except when CF3S03H is used as a catalyst. The method is also applicable to the formation of r-butyldimethylsilyl derivatives the silyl ether of cyclohexanol was prepared in 95% yield from allyl-/-butyldi-methylsilane. Iodine, bromine, trimethylsilyl bromide, and trimethylsilyl iodide have also been used as catalysts. Nafion-H has been shown to be an effective catalyst. 

In an attempt to protect thiophenols during electrophilic substitution reactions on the aromatic ring, the three substituted thioethers were prepared. After acetylation... 

Butyroin has been prepared by reductive condensation of ethyl butyrate with sodium in xylene, or with sodium in the presence of chloro-trimethylsilane. and by reduction of 4,5-octanedlone with sodium l-benzyl-3-carbamoyl-l,4-dihydropyridine-4-sulfinate in the presence of magnesium chloride or with thiophenol in the presence of iron polyphthalocyanine as electron transfer agent.This acyloin has also been obtained by oxidation of (E)-4-octene with potassium permanganate and by reaction of... 

Diphenyl sulfide can best be prepared by treating benzene and aluminum chloride with sulfur chloride, sulfur dichloride, or sulfur. In addition to diphenyl sulfide there are found traces of thiophenol and varying amounts of thianthrene. 

Thioketals are readily prepared by treating the corresponding ketone with ethanedithiol and propane-1,3-dithiol. The 12-ketone fails to react with monothiols such as ethanethiol or thiophenol or with the bulkier 1-phenylethane-1,2-dithiol or tetralin-2,3-di thiol. The A Ei2-ketone... 

In an attempt to protect thiophenols during electrophilic substitution reactions on the aromatic ring, the three substituted thioethers were prepared. After acetylation of the aromatic ring (with moderate yields), the protective group was converted to the disulfide in moderate yields, 50-60%, by oxidation with hydrogen peroxide/boiling mineral acid, nitric acid, or acidic potassium permanganate. ... 

Caution Since the odor of the thiophenol (benzenethiol) used in this preparation is unpleasant, both steps of this preparation should be conducted in a hood and the glassware used should be washed before it is removed from the hood. 

Konig et al. have achieved thioether functionalization of T8[CH = CH2]8 via the radical addition of thiols such as thiophenol, cyclohexylthiol, and 2-mercaptopyridine in the presence of azobisisobutyronitrile (AIBN) as a radical initiator (Table 13), while Gao et al. have also used this method to prepare very highly functionalized POSS by reacting T8[CH = CH2]8 with thiol-terminated glycosides giving glycoclusters in 70% yield (Figure 22). 

Sulfided bimetallic clusters which mimic the metal composition of commercial hydrodesulfurization (HDS) catalysts have been prepared and their homogeneous catalytic behavior studied. Reaction of thiophenol with [Mo2Co2(/z4-S)... 

Phenylthio acetals are much more easily prepared from the corresponding 4-acetoxy-l,3-dioxanes [45] (Eq. 29). The dioxane 125 gave the phenyl sulfides 185 in essentially quantitative yield on treatment with BF3 OEt2 and thiophenol at -78 °C. This method has been used to prepare compound 185 on a 40 g scale. 

Carboxylic acids such as acetic acid react with alcohols such as methanol or with methoxytrimethylsilane 13 a in the presence of trimethylchlorosilane (TCS) 14 in THF or 2-methyl-THF to give esters such as methyl acetate in 97% yield and hex-amethyldisiloxane 7. Even methyl pivalate can be readily prepared in 91% yield [111]. Reaction of a variety of carboxylic acids, for example N-benzoylglycine 329, with two equivalents of yS-trimethylsilylethanol 330 and with 14 has been shown to afford esters such as 331 in 98% yield [112, 112 a]. Likewise, silylated carboxylic acids react with silylated alcohols or thiophenols in the presence of 4-trifluoro-methylbenzoic anhydride and TiCl4/AgCl04 to furnish esters or thioesters in high yields [113, 114] (Scheme 4.43). 

Among the most useful radical fragmentation reactions from a synthetic point of view are decarboxylations and fragmentations of alkoxyl radicals. The use of (V-hydroxy-2-thiopyridine esters for decarboxylation is quite general. Several procedures and reagents are available for preparation of the esters,353 and the reaction conditions are compatible with many functional groups.354 f-Butyl mercaptan and thiophenol can serve as hydrogen atom donors. 

The key structural features of compound 1 are the chiral cis-diaryl benzox-athiin fused ring system, two phenols, and one phenol ether linkage with the pyrrolidinylethanol. Originally, SERM 1 was prepared by medicinal chemists from a key ketone intermediate 5 shown in Scheme 5.1. Compound 5 was prepared in four steps with rather low yield [4a], Among these steps, the high temperature de-methylation step and the use of extremely toxic MOM-C1 were not particularly suitable for scale-up. The ketone 5 was then brominated with PhMe3NBr3 (PTAB) and coupled with thiophenol 7 to produce adduct 8. The key step of the synthesis was the conversion of adduct 8 to cis-diaryl benzoxathiin 9 under the Kursanov-Parne reaction conditions (TFA/Et3SiH). This novel reaction allowed the formation... 

The asymmetric reduction of the benzoxathiin is very appealing because of its simplicity (Scheme 5.3). It was envisioned that intermediate 16 could be prepared from thiol-phenol 7 and bro moke tone 17. Scheme 5.8 summarized the synthesis for 16. The l,3-benzoxathiol-2-one 35 was prepared from 1,4-benzoquinone and thiourea following a literature procedure with minor modifications. Benzylation of 35 with benzyl bromide in the presence of KI gave benzyl ether 36 as a crystalline solid. It was observed that the benzylation gave better results when the reaction was run under anaerobic conditions. Hydrolysis of thiocarbonate 36 gave free thiophenol 7 which was used directly in the next reaction. 

Dining preparation of thiophenol by addition of a cold solution of potassium O-methyldithiocarbonate to a cold solution of benzenediazonium chloride, a violent explosion accompanied by an orange flash occurred [1], This was attributed to the formation and decomposition of bis(benzenediazo) disulfide. A preparation in which the diazonium solution was added to the xanthate solution proceeded smoothly [2],... 

The base-catalyzed joint reaction of nitroalkenes with thiophenol in the presence of aldehydes gives y-phenylthio-P-nitro alcohols in one pot (Eq. 4.5).8 The joint reaction of nitroalkenes with thiols and a,p-unsaturated nitriles (or esters) has also been achieved. (Eq. 4.6).9 P-Nitro sulfides thus prepared show unique reactivity toward nucleophiles or tin radicals. The nitro... 

Combining, in tandem, the nitro-aldol reaction with the Michael addition using thiophenol is a good method for the preparation of P-nitro sulfides as shown in Eqs. 4.2 and 4.3. This reaction is applied to a total synthesis of tuberine. Tuberine is a simple enamide isolated from Streptomyces amakusaensis and has some structural resemblance to erbastatin, an enamide which has received much attention in recent years as an inhibitor of tyrosine-specific kinases. The reaction of p-anisaldehyde and nitromethane in the presence of thiophenol yields the requisite P-nitro sulfide, which is converted into tuberine via reduction, formylation, oxidation, and thermal elimination of... 

This is a general reaction. It can be used for preparing other selenophenols whenever the desired Grignard reagent can be obtained. The submitter has made the three selenocresols, p-hromophen y 1 scl enophenol, and m-butylselenol by this procedure. He has also obtained thiophenols by the substitution of sulfur for selenium. 

The second cycloaddition substrate took to form of 91 (Scheme 1.9b), incorporating a vinyl sulfone dipolarophile. Beginning with cyano ketone 84, which was readily prepared from 1,5-dicyanopentane via a previously reported three-step sequence [45], condensation with thiophenol produced vinyl sulfide 85 in 84 % yield. Vinyl sulfide 85 underwent bromination in acetonitrile to afford bromo-vinyl sulfide 86 (86 %), which was then treated with isopropylmagnesium chloride [46] to effect metal-halogen exchange affording an intermediate vinyl magnesium bromide species. Subsequent alkylation with Mel in the presence of catalytic CuCN provided the alkylated vinyl sulfide 87 in 93 % yield. The nitrile within vinyl... 

Peptides typically are prepared for this ligation process using a-alkyl thioesters, because they are simple to make at the time of peptide synthesis. However, due to the relatively slow reaction kinetics of alkyl thioesters, most native chemical ligation processes have been catalyzed through the use of thiol compound additives, such as benzyl mercaptan or thiophenol (Dawson et al., 1997). These compounds react with the initial a-alkyl thioester to form another intermediate, an aryl thioester, which is more reactive toward the N-terminal cysteine on the other peptide to be coupled. A study... 

---