Cycloaddition thermal, intramolecular

A thermal intramolecular [2 + 2] cycloaddition between an electrophilic allene and a conjugated diene has been reported for substrates 40 and 42.27,28 Interestingly, the analog of 40 without the methyl group gives the [4 + 2] product. 

The thermal intramolecular 2 + 2-cycloaddition of 4,4,-disubstituted-2,2/-bis(phenyl-ethynyl)biphenyls (1) yielded the intermediate l,2-diphenylcyclobuta[l]phenanthrenes (2), which could be trapped with 2,3,4,5-tetraphenylcyclopenta-2,4-dione (3) to produce the Diels-Alder adduct (4). Thermal decarbonylative ring opening of (4) gave 9,10,11,12,13,14-hexaphenylcycloocta[l]phenanthrenes (5) as the final product in 12-23% yield (Scheme l).1... 

Thermal intramolecular [2 - - 2] cycloadditions of 3-allylcyclopropenes, e.g. 127, are not only known but are also remarkably efficient (equations 46 and 53). Tricyclic products, e.g. 129, are formed and the cycloaddition competes with stereospecific Cope... 

After completion of this review, a thermal intramolecular (2 + 2)-cycloaddition of a conjugated 4 -electron system of a heterocyclic compound was disclosed. Padwa et a/.310 reported the conversion of 2,3,5,7-tetraphenyl-7//-l,4-diazepine (286) into 2,4,5,7-tetraphenyl-3,6-diazabicyclof3.2.0]hepta-3,6-diene (287), which occurs upon refluxing in benzene in 68% yield. 

The thermal intramolecular [2+2] cycloaddition reaction of the azetidinone-tethered enallene 174 affords the tricyclic /3-lactam 175 . 

A sequence of two thermal intramolecular cycloadditions has been used to develop a short synthetic approach to tetrahydrothiopyrans [122], The multiple process includes an m m-hetero- and an intramolecular-carbon Diels-Alder reaction. An intramolecular /zctcro-Diels-Alder reaction of divinyl-thioketone 134 afforded a 9 1 mixture of cycloadducts 135 and 136 which then underwent a second intramolecular cycloaddition which syn o H-2)-exo-diastereoselectively led to hexacyclic tetrahydrothiopyrans 137 and 138, respectively (Scheme 2.51). 

Although thermal [2 + 2] cycloadditions are forbidden as concerted reactions by the orbital symmetry conservation rules the same structural features which promote intermolecular cy-cioadditions will also promote intramolecular reactions. In addition, the proximity between two alkene moieties dictated by the tether length and rigidity would make these processes entropically favorable. A few reports have documented thermal intramolecular cycloadditions to cyclopropenes and activated alkenes. The thermal Cope rearrangement of allylcyclopropenes apparently proceeds by a two-step mechanism in which intramolecular [2 + 2] adducts have been observed.72-73... 

Bisacryloylimides 7 undergo thermal intramolecular cycloadditions giving either head-to-head or head-to-tail cyclobutanes 8 or 9, respectively, depending on the substituent at the double... 

A new synthesis of ( )-actinidine has been reported it is interesting in that it has, as its key step, the thermal intramolecular cycloaddition of an acetylenic pyrimidine.34 A further synthesis of ( )-muscopyridine, based on a regioselective cyclopentenone annulation, has been described.35... 

Tetrahydroalstonine 7-7, a heteroyohimboid alkaloid, has been synthesised in enantiopure form by Martin et al. by means of an oxa Diels-Alder reaction as key step. The trienic precursor 7-5 underwent a thermal intramolecular cycloaddition to form a 5 1 mixture of 7-6 and its 15/J-epimer. The main cycloadduct was then subjected to a straightforward sequence to yield the natural product 7-7 (Fig. 7-2) [483-485]. In earlier work, Ogasawara et al. have employed a con-ceptionally different domino Knoevenagel-hetero Diels-Alder approach to this alkaloid and other natural products [486-488]. 

Thermal intramolecular cycloaddition reactions of unsaturated nitrones 1341 derived from a series of N- 2-alkenyl)-2-pyrrolecarbaldehydes 1340 and benzylhydroxylamine lead to competitive formation of two kinds of intramolecular cycloadducts, namely the fused- and the bridged-ring regioisomers 1342 and 1343, respectively (Scheme 255) <2001T8323>. Further elaboration of compounds 1342 and 1343 has given pyrrolizidine and indolizidine derivatives, respectively. A similar regiochemical trend was observed when aldehydes 1340 were reacted with (/ )-a-methylbenzylhydroxylamine in order to synthesize optically active compounds. 

Sammes and his group (77JCS(P1)663 78JCS(P1)1293 81JCS(P1)1909) attempted the thermal intramolecular cycloaddition of the substituted pyrimidine 507 possessing an alkyne to produce a monoterpene alkaloid ( )-actinidine (511)(Scheme 64). Upon thermolysis of the pyrimidine 507 at 200°C in a sealed tube, using dimethylformamide as solvent, intramolecular cycloaddition led to the known pyridone 509 in 87% yield by the loss of the amide bridge from intermediate 508. Conversion of the pyridone 509 into the chloropyridine followed by reductive dechlorination afforded racemic actinidine 511. 

Actinidine (134) was synthesized by Sammes and co-workers (178) using as a key step a thermal intramolecular cycloaddition of a substituted pyrimidine by an acetylene moiety. In the nor series, thermolysis of the pyrimidine 140 at 200°C gave the substituted pyridone 141 directly. Condensation of the acetylene 142 with formamidine proceeded in high yield to afford the pyrimidine 143, which, on treatment with phosphoryl chloride and catalytic hydrogenation, afforded ( )-actinidine (134) (Scheme 2) (178). 

A brief report has appeared describing an interesting synthesis of an annulated pyridine by thermal intramolecular cycloaddition of a diene nitrile. Unfortunately, neither yields nor a detailed account of reaction conditions were provided [Eq. (6)].11... 

The thermal intramolecular cycloaddition of the allene 1,3-dicarboxylate 410 affords the [4+2] cycloadducts 411 in 95 % yields... 

When additional substituents are introduced in the 2- and/or 4-position, the thermal rearrangement gives products in which the substituents that were originally located in the 1- and 5-position of the quadricyclane are then located at C4 and C5 of the oxepin 7.30,123 In order to trap intermediates of this rearrangement reaction by intramolecular cycloaddition vinyl and acetylene groups were linked with different spacer groups to C2 of quadricyclane.123 In this manner two different intramolecular cycloadducts were isolated in addition to oxepin derivatives.123... 

There are many types of Diels-Alder reactions that are carried out under thermal conditions. This chapter will deal with the most significant developments, the potential and range of applications of this methodology of both the intermolecular and intramolecular cycloadditions in organic synthesis. 

Decalin unit 121, an intermediate in the total synthesis of compactin, has been prepared by intramolecular cycloaddition reaction [117] of trienone-carboxylic acid 122 carried out under either thermal conditions or microwave irradiation. The desired cxo-adduct 123 was the major stereoisomer (Equation 2.34). Similar results were observed in the cycloadditions of the corresponding esters. 

Trienone 124 underwent intramolecular cycloaddition affording hydrobenzo-suberone 125. Thermal reaction was poorly diastereoselective (62 38 cis trans stereoisomers). When the cycloaddition was carried out in the presence of LiBF4, trienone 124 was converted into cA-adduct 125 quantitatively and stereo selectively [118] (Equation 2.35). 

Tetraene 141 has been converted into various complex polycondensed adducts by reacting with a variety of dienophiles such as maleic anhydride, N-phenylmaleimide, N-phenyltriazolinedione,p-benzoquinone and tetracyano-ethylene carried out under thermal conditions. All cycloadditions occurred facial-diastereoselectively from an outside attack and provided monocycloadducts which had an exceptionally close relationship between diene and dieno-phile and then underwent intramolecular cycloaddition [125]. The reaction between 141 and p-benzoquinone is illustrated in Scheme 2.53. 

Another elegant example of the thermal generation and subsequent intramolecular cycloaddition of an o-QM can be found in Snider s biomimetic synthesis of the tetracyclic core of bisabosquals.2 Treatment of the starting material with acid causes the MOM ethers to cleave from the phenol core (Fig. 4.3). Under thermal conditions, a proton transfer ensues from one of the phenols to its neighboring benzylic alcohol residue. Upon expulsion of water, an o-QM forms. The E or Z geometry of the o-QM intermediate and its propensity toward interception by formaldehyde, water, or itself, again prove inconsequential as the outcome is decided by the relative thermodynamic stabilities among accessible products. 

For the synthesis of estradiol methyl ether 4-319, the cydobutene derivative 4-317 was heated to give the orthoquinonedimethane 4-318 which cydized in an intramolecular Diels-Alder reaction [109]. The thermally permitted, conrotatory elec-trocyclic ring-opening of benzocyclobutenes [110] with subsequent intramolecular cycloaddition also allowed the formation of numerous complex frameworks (Scheme 4.70). 

As can be seen in the intramolecular cycloaddition (Section 8.03.5.1), the intermolecular Diels-Alder reactions between functionalized 2(l/f)-pyrazinones 83 and dimethyl acetylenedicarboxylate (DMAD) forming bicyclo adducts 84 has been shown to be significantly rate enhanced and increased in yields by using controlled microwave irradiation compared to the conventional thermal protocols (Scheme 21) <2002JOC7904>. The microwave-assisted Diels-Alder reactions of substituted 2(l//)-pyrazinones with ethene are significantly more effective utilizing prepressurized (up to 10 bar) reaction vessels <20040BC154>. 

Treatment with amines of the type 279 generated the intermediate oxazolidinone 280, which underwent thermal decarboxylative formation of the azomethine yhde. Subsequent in situ intramolecular cycloaddition formed the products 281 and 282 in 63% yield and in a 1 1.2 ratio for n=l. Replacing toluene for acetonitrile, for n = 2, gave comparable yields and an improved ratio of 1 2.1 in favor of 281 (Scheme 3.93). 

Epoxide 96 was prepared such that photolytic conversion to the carbonyl ylide could be followed by an intramolecular cycloaddition with the tethered pendant olefin. However, photolysis of epoxide 96 led only to the formation of the regio-isomer 97 and the aldehyde 98 with no evidence of the corresponding cycloadduct. It was presumed that 97 arose from the ylide by thermal recyclization to the epoxide while 98 could form through the loss of a carbene from the ylide. The failure of the tethered alkene to undergo cycloaddition may have resulted from a poor trajectory for the cycloaddition. An extended analogue (99) allowed greater flexibility for the dipolarophile to adopt any number of conformations. Photolysis of epoxide 99 did lead to formation of the macrocyclic adduct 100, albeit in modest yields. 

An intramolecular cycloaddition reaction was also used in the synthesis of the annelated tetrahydrothiophene (97), starting from l,3-oxathiolan-5-one (96) (131) (Scheme 5.36). Thiocarbonyl ylide formation occurred by thermal extrusion of CO2 at 250 °C, yielding 97 in 62% yield. 

With respect to the large number of unsaturated diazo and diazocarbonyl compounds that have recently been used for intramolecular transition metal catalyzed cyclopropanation reactions (6-8), it is remarkable that 1,3-dipolar cycloadditions with retention of the azo moiety have only been occasionally observed. This finding is probably due to the fact that these [3+2]-cycloaddition reactions require thermal activation while the catalytic reactions are carried out at ambient temperature. A7-AUyl carboxamides appear to be rather amenable to intramolecular cycloaddition. Compounds 254—256 (Scheme 8.61) cyclize intra-molecularly even at room temperature. The faster reaction of 254c (310) and diethoxyphosphoryl-substituted diazoamides 255 (311) as compared with diazoacetamides 254a (312) (xy2 25 h at 22 °C) and 254b (310), points to a LUMO (dipole) — HOMO(dipolarophile) controlled process. The A -pyrazolines expected... 

The tandem transesterification/[3 + 2]-cycloaddition methodology is be a powerful synthetic tool, since it guarantees high diastereoselectivity even under thermal conditions. It has been successfully apphed to synthetic work of the N-terminal amino acid component of Nikkomycin Bz (Scheme 11.53) (173). Thus, the sugar-based oxime is condensed with a glyoxylate hemiacetal to produce a chiral nitrone ester, which is then reacted with ( )-p-niethoxycinnamyl alcohol in the presence of a catalytic amount of TiCU at 100 °C. After the intramolecular cycloaddition, the... 

There are isolated reports where these dihydropyridines are involved in cycloaddition reactions. For example, the thermal rearrangement of 1,2-dihydropyridines gives 2,3-dihydropyridines. It has been postulated that the formation of (287) from the 1,2-dihy-dropyridine (284) occurs by rearrangement to (286) via the 2,3-dihydropyridine (285). An intramolecular cycloaddition reaction of (286) gives the observed product (Scheme 57) (78JA6696). 

Further research on this subject was recently reported, in relation to the use of dienynes as substrates for intramolecular cycloaddition. While thermal intramolecular [4+2] cycloadditions of enynes with alkenes only took place at high temperatures, the gold(I) catalyzed transformations provided bi- or tri-cyclic ring systems under mild conditions [152]. 

---