Terminal hydroboration

The catalytic hydroboration of vinylarenes has also been well studied and, depending on the rhodium or iridium catalytic system used, the product distribution can be tuned. [lrCl2(T -C5Me5)]2 catalyzed the hydroboration of 4-vinylanisole in the presence of HBcat with the exclusive formation of the terminal hydroboration product, in contrast to the analogue rhodium complexes which mainly afford the branched alkylboronate ester (Scheme 7.13) [14]. 

Organoboranes undergo transmetallation. 1-Hexenylboronic acid (438) reacts with methyl acrylate via the transmetallation with Pd(OAc)2, giving methyl 2,4-nonadienoate (439)[399], The ( )-alkenylboranes 440, prepared by the hydroboration of terminal alkynes, are converted into the alkylated ( )-alkenes 441 by treatment with an equivalent amount of Pd(OAc)2 and triethylamine[400]. The ( )-octenylborane 442 reacts with CO in MeOH in the... 

Primary dialkylboranes react readily with most alkenes at ambient temperatures and dihydroborate terminal acetylenes. However, these unhindered dialkylboranes exist in equiUbtium with mono- and ttialkylboranes and cannot be prepared in a state of high purity by the reaction of two equivalents of an alkene with borane (35—38). Nevertheless, such mixtures can be used for hydroboration if the products are acceptable for further transformations or can be separated (90). When pure primary dialkylboranes are required they are best prepared by the reduction of dialkylhalogenoboranes with metal hydrides (91—93). To avoid redistribution they must be used immediately or be stabilized as amine complexes or converted into dialkylborohydtides. 

Dibromoborane—dimethyl sulfide is a more convenient reagent. It reacts directly with alkenes and alkynes to give the corresponding alkyl- and alkenyldibromoboranes (120—123). Dibromoborane differentiates between alkenes and alkynes hydroborating internal alkynes preferentially to terminal double and triple bonds (123). Unlike other substituted boranes it is more reactive toward 1,1-disubstituted than monosubstituted alkenes (124). 

Among chiral dialkylboranes, diisopinocampheylborane (8) is the most important and best-studied asymmetric hydroborating agent. It is obtained in both enantiomeric forms from naturally occurring a-pinene. Several procedures for its synthesis have been developed (151—153). The most convenient one, providing product of essentially 100% ee, involves the hydroboration of a-pinene with borane—dimethyl sulfide in tetrahydrofuran (154). Other chiral dialkylboranes derived from terpenes, eg, 2- and 3-carene (155), limonene (156), and longifolene (157,158), can also be prepared by controlled hydroboration. A more tedious approach to chiral dialkylboranes is based on the resolution of racemates. /n j -2,5-Dimethylborolane, which shows excellent enantioselectivity in the hydroboration of all principal classes of prochiral alkenes except 1,1-disubstituted terminal double bonds, has been... 

Usually, organoboranes are sensitive to oxygen. Simple trialkylboranes are spontaneously flammable in contact with air. Nevertheless, under carefully controlled conditions the reaction of organoboranes with oxygen can be used for the preparation of alcohols or alkyl hydroperoxides (228,229). Aldehydes are produced by oxidation of primary alkylboranes with pyridinium chi orochrom ate (188). Chromic acid at pH < 3 transforms secondary alkyl and cycloalkylboranes into ketones pyridinium chi orochrom ate can also be used (230,231). A convenient procedure for the direct conversion of terminal alkenes into carboxyUc acids employs hydroboration with dibromoborane—dimethyl sulfide and oxidation of the intermediate alkyldibromoborane with chromium trioxide in 90% aqueous acetic acid (232,233). 

Constmction of multilayers requires that the monolayer surface be modified to a hydroxylated one. Such surfaces can be prepared by a chemical reaction and the conversion of a nonpolar terminal group to a hydroxyl group. Examples of such reactions are the LiAlH reduction of a surface ester group (165), the hydroboration—oxidation of a terminal vinyl group (127,163), and the conversion of a surface bromide using silver chemistry (200). Once a subsequent monolayer is adsorbed on the "activated" monolayer, multilayer films may be built by repetition of this process (Fig. 8). 

The hydroboration/oxidation sequence is complementary to the direct, mercury(ll)-catalyzed hydration reaction of a terminal alkyne because different products result. Direct hydration with aqueous acid and mercury(IJ) sulfate leads to a methyl ketone, whereas hydroboration/oxidation of the same terminal alkyne leads to an aldehyde. 

The chemistry of alkynes is dominated by electrophilic addition reactions, similar to those of alkenes. Alkynes react with HBr and HC1 to yield vinylic halides and with Br2 and Cl2 to yield 1,2-dihalides (vicinal dihalides). Alkynes can be hydrated by reaction with aqueous sulfuric acid in the presence of mercury(ll) catalyst. The reaction leads to an intermediate enol that immediately isomerizes to yield a ketone tautomer. Since the addition reaction occurs with Markovnikov regiochemistry, a methyl ketone is produced from a terminal alkyne. Alternatively, hydroboration/oxidation of a terminal alkyne yields an aldehyde. 

A synthetically useful virtue of enol triflates is that they are amenable to palladium-catalyzed carbon-carbon bond-forming reactions under mild conditions. When a solution of enol triflate 21 and tetrakis(triphenylphosphine)palladium(o) in benzene is treated with a mixture of terminal alkyne 17, n-propylamine, and cuprous iodide,17 intermediate 22 is formed in 76-84% yield. Although a partial hydrogenation of the alkyne in 22 could conceivably secure the formation of the cis C1-C2 olefin, a chemoselective hydrobora-tion/protonation sequence was found to be a much more reliable and suitable alternative. Thus, sequential hydroboration of the alkyne 22 with dicyclohexylborane, protonolysis, oxidative workup, and hydrolysis of the oxabicyclo[2.2.2]octyl ester protecting group gives dienic carboxylic acid 15 in a yield of 86% from 22. 

Tripylborane is an interesting reagent which resembles thexylborane. One of the important uses of thexylborane lies in the synthesis of unsymmetrical thexyldialkylboranes which can then be used in the synthesis of unsymmetrical ketones. However, the reaction is only successful if the alkene used in the first hydroboration step is an internal alkene. Simple terminal alkenes such as 1-hexene react too rapidly with the initially formed thexylmonoalkylborane to allow the reaction to be stopped at that stage. Therefore, mixtures of products result (ref. 27). 

Alkylboranes can be coupled by treatment with silver nitrate and base." Since alkylboranes are easily prepared from alkenes (15-16), this is essentially a way of coupling and reducing alkenes in fact, alkenes can be hydroborated and coupled in the same flask. For symmetrical coupling (R = R ) yields range from 60 to 80% for terminal alkenes and from 35 to 50% for internal ones. Unsymmetrical coupling has also been carried out, but with lower yields. Arylboranes react similarly, yielding biaryls. The mechanism is probably of the free-radical type. 

The differences in the steric effect between catecholborane and pinacolborane, and the valence effect between a cationic or neutral rhodium complex reverse the re-gioselechvity for fluoroalkenes (Scheme 1-4) [26]. The reaction affords one of two possible isomers with excellent regioselectivity by selecting borane and the catalyst appropriately, whereas the uncatalyzed reaction of 9-BBN or SiaiBH failed to yield the hydroboration products because of the low nucleophilicity of fluoroalkenes. The regiochemical preference is consistent with the selectivity that is observed in the hydroboration of styrene. Thus, the internal products are selectively obtained when using a cationic rhodium and small catecholborane while bulky pinacolborane yields terminal products in the presence of a neutral rhodium catalyst. 

I 7 Hydroboration, Diboration, Silylboration and Stannylboration Tab. 1-3 Isomerization to the Terminal Carbon 1. HBX2/catalyst... 

The dominant factors reversing the conventional ds-hydroboration to the trans-hydroboration are the use of alkyne in excess of catecholborane or pinacolborane and the presence of more than 1 equiv. of EtsN. The P-hydrogen in the ris-product unexpectedly does not derive from the borane reagents because a deuterium label at the terminal carbon selectively migrates to the P-carbon (Scheme 1-5). A vinylidene complex (17) [45] generated by the oxidative addition of the terminal C-H bond to the catalyst is proposed as a key intermediate of the formal trans-hydroboration. 

These reagents are prepared by hydroboration of the appropriate alkene, using control of stoichiometry to terminate the hydroboration at the desired degree of alkylation. 

Migration of boron to terminal positions is observed under much milder conditions in the presence of transition metal catalysts. For example, hydroboration of 2-methyl-3-hexene by pinacolborane in the presence of Rh(PPh3)3Cl leads to the terminal boronate ester. 

An alternative procedure for oxidation to ketones involves treatment of the alkylborane with a quaternary ammonium perruthenate salt and an amine oxide186 (see Entry 6 in Scheme 4.9). Use of dibromoborane-dimethyl sulfide for hydroboration of terminal alkenes, followed by hydrolysis and Cr(VI) oxidation gives carboxylic acids.187... 

---