Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Tensile testing system configuration

Figure 19.2 Configuration of the seven markers in the video-controlled tensile testing system (a) schematic diagram and (b) micrograph of a sample deformed. (From Reference 10 with permission from Elsevier). Figure 19.2 Configuration of the seven markers in the video-controlled tensile testing system (a) schematic diagram and (b) micrograph of a sample deformed. (From Reference 10 with permission from Elsevier).
Tensile tests at low to intermediate displacement rates (i.e. 1, 10, 100 and 500 mm/min) were performed by an Instron tensile tester model 4502 equipped with a 1 kN load cell. Temperature in the range from 0°C to 70°C was controlled by an Instron thermostatic chamber model 3119. Tests at the moderately high displacement rate of 60000 mm/min (1 m/s) were carried out at room temperature by an instrumented CEAST impact pendulum in the tensile configuration. Load data were collected at a sampling time of 30 p.s and load vs displacement curves were provided directly by the CEAST software (DAS 4000 Extended Win Acquisition System Ver. 3.30). [Pg.92]


See other pages where Tensile testing system configuration is mentioned: [Pg.46]    [Pg.396]    [Pg.396]    [Pg.118]    [Pg.372]    [Pg.293]    [Pg.294]    [Pg.304]    [Pg.591]    [Pg.342]    [Pg.11]   
See also in sourсe #XX -- [ Pg.123 ]




SEARCH



Configurable system

Configurations system

System testing

Test Configuration

Test systems

Testing tensile

© 2024 chempedia.info