Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Templated carbons formation process

Using uniform and straight nanochannels of an anodic aluminum oxide (AAO) film as a template, CNTs can be prepared by pyrolytic carbon deposition on the AAO film [109-116]. Briefly, the AAO film was subjected to carbon deposition from the pyrolytic decomposition of propylene at 800°C, which resulted in a uniform pyrolytic carbon coating on the inner wall of the template nanochannels. Then, the AAO template was removed with HF washing, and only carbon was left as an insoluble fraction. The formation process of carbon tubes using this chemical vapor deposition (CVD) technique is illustrated in Figure 3.8. [Pg.90]

As mentioned earlier, biological systems have developed optimized strategies to design materials with elaborate nanostructures [6]. A straightforward approach to obtaining nanoparticles with controlled size and organization should therefore rely on so-called biomimetic syntheses where one aims to reproduce in vitro the natural processes of biomineralization. In this context, a first possibility is to extract and analyze the biological (macro)-molecules that are involved in these processes and to use them as templates for the formation of the same materials. Such an approach has been widely developed for calcium carbonate biomimetic synthesis [13]. In the case of oxide nanomaterials, the most studied system so far is the silica shell formed by diatoms [14]. [Pg.160]

In carbohydrate chemistry, the most described method for the preparation of saccharidic thionocarbamates involves preliminary introduction of the amine function on a partially or non-protected saccharidic template. The condensation of amino sugars with carbon disulfide or thiophosgene leads to cyclization in 1,3-oxazolidine- or l,3-oxazine-2-thiones. This reaction involves the formation of an intermediate isothiocyanate, which reacts further with a 3- or y-located hydroxyl group. The viability and facility of this process depends on the saccharidic ring size and the inherent strain. Some major rules can be put into light from the cases studied 30... [Pg.128]

The most important reaction of this type is the formation of imine bonds and Schiff bases. For example, salicylaldehyde and a variety of primary amines undergo reaction to yield the related imines, which can be used as ligands in the formation of metal complexes. However, it is often more desirable to prepare such metal complexes directly by reaction of the amine and the aldehyde in the presence of the metal ion, rather than preform the imine.113 As shown in Scheme 31, imine formation is a reversible process and isolation of the metal complex results from its stability, which in turn controls the equilibrium. It is possible, and quite likely, that prior coordination of the salicylaldehyde to the metal ion results in activation of the carbonyl carbon to amine nucleophilic attack. But it would be impossible for a precoordinated amine to act as a nucleophile and consequently no kinetic template effect could be involved. Numerous macrocyclic chelate systems have been prepared by means of imine bond formation (see Section 61.1.2.1). In mechanistic terms, the whole multistep process could occur without any geometrical influence on the part of the metal ion, which could merely act to stabilize the macrocycle in complex formation. On the other hand,... [Pg.434]

Addadi, L., Joester, D., Nudelman, F., and Weiner, S. "Mollusk shell formation A source of new concepts for understanding biomineralization processes". Chem. Eur.. 12(4), 981-987 (2006). Ajikumar, P.K., Lakshminarayanan, R., and Valiyaveettil, S. "Controlled deposition of thin films of calcium carbonate on natural and synthetic templates". Crystal Growth Des. 4(2), 331-335 (2004). [Pg.148]

The templates can be simply coordinated rather than attached. For example, complex 100 directed the radical relay chlorination to C-9, although the process was not as clean as with the attached templates [173]. We also used template-directed chlorina-tions to determine the conformations of flexible chains, just as we had previously with the benzophenone probes [174]. Also, by use of a set of tandem free radical chain reactions we could direct the formation of carbon-bromine and carbon-sulfur bonds, again with geometric control by the attached template [175]. [Pg.24]

In this article we provide a broad overview of the application of radical methods in carbohydrate chemistry, including typical examples classified by the type of bond formed. The factors controlling the stereoselectivity of inter- and intramolecular C-C bond formation are now well understood and have been exploited in the synthesis of C-glycosides [2]. Intramolecular C C bond formation using carbohydrate-based chiral templates also provides a powerful route to branched-chain sugars [3] and carbocycles [4]. Finally, we include synthetically useful processes involving key carbon-heteroatom and C-H bond formation. [Pg.1036]

On the methodological front of these broadly based endeavors, we have exploited pericyclic processes such as the dipolar cycloadditions of nitrile oxides together with the aldol reaction and related constructions as tactical devices for the formation of new carbon-carbon bonds with high levels of stereochemical control Another important focus of these explorations has been upon the development of techniques for the manipulation and refunctionalization of hydropyrans, since this structural subunit is not only common to a variety of natural substances, but it may also be effectively exploited as a conformationally-biased template for the stereoselective construction of various skeletal arrays present in numerous natural products. In this context, we have devised a novel and highly effective strategy for the asymmetric syntheses of oxygenated natural products. The fundamental approach features the intermediacy of the hydro-3-pyranones 12, which may be accessed from the chiral furfuryl carbinols 10 via the hydroxy enediones 11 by well-established oxidative techniques (Scheme 1). A critical element of this overall planll is that the hydro-3-pyranones 12 are admirably endowed with differentiated functionality that is suitable for further elaboration by reaction with selected nucleophiles... [Pg.136]


See other pages where Templated carbons formation process is mentioned: [Pg.195]    [Pg.561]    [Pg.375]    [Pg.225]    [Pg.61]    [Pg.4]    [Pg.494]    [Pg.289]    [Pg.86]    [Pg.26]    [Pg.207]    [Pg.145]    [Pg.41]    [Pg.94]    [Pg.310]    [Pg.995]    [Pg.369]    [Pg.44]    [Pg.136]    [Pg.50]    [Pg.233]    [Pg.116]    [Pg.126]    [Pg.96]    [Pg.471]    [Pg.219]    [Pg.267]    [Pg.208]    [Pg.237]    [Pg.257]    [Pg.471]    [Pg.604]    [Pg.92]    [Pg.165]    [Pg.127]    [Pg.140]    [Pg.564]    [Pg.289]    [Pg.136]    [Pg.246]    [Pg.189]    [Pg.79]   
See also in sourсe #XX -- [ Pg.90 ]




SEARCH



Carbon templating

Carbonation process

Carbonization process

Process carbonate

© 2024 chempedia.info