Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Surface hydrogenation

The measurement of a from the experimental slope of the Tafel equation may help to decide between rate-determining steps in an electrode process. Thus in the reduction water to evolve H2 gas, if the slow step is the reaction of with the metal M to form surface hydrogen atoms, M—H, a is expected to be about If, on the other hand, the slow step is the surface combination of two hydrogen atoms to form H2, a second-order process, then a should be 2 (see Ref. 150). [Pg.214]

Fig. 7.23 In simulations of stearic add on a hydrophobic surface hydrogen bonding between the head groups is important in controlling the orientation of the molecules [Kim et al, 1994b],... Fig. 7.23 In simulations of stearic add on a hydrophobic surface hydrogen bonding between the head groups is important in controlling the orientation of the molecules [Kim et al, 1994b],...
Eor the cover-coat direct-on process, a ferric sulfate [10028-22-5] Ee2(S0 2> etch is included in the metal pretreatment for rapid metal removal. It is designed to remove ca 20 g/m (2 g/ft ) of iron from the sheet metal surface. Hydrogen peroxide [7722-84-1/, H2O2, is added intermittently to a 1% ferric sulfate solution to reoxidize ferrous sulfate [7720-78-7] EeSO, to ferric sulfate. [Pg.212]

Problems with adsorption onto the packing material are more common in aqueous GPC than in organic solvents. Adsorption onto the stationary phase can occur even for materials that are well soluble in water if there are specific interactions between the analyte and the surface. A common example of such an interaction is the analysis of pEG on a silica-based column. Because of residual silanols on the silica surface, hydrogen bonding can occur and pEG cannot be chromatographed reliably on silica-based columns. Eikewise, difficulties are often encountered with polystyrenesulfonate on methacrylate-based columns. [Pg.556]

Polarization can be divided into activation polarization and concentration polarization , Activation polarization is an electrochemical reaction that is controlled by the reaction occurring on the metal-electrolyte interface. Figure 4-418 illustrates the concept of activation polarization where hydrogen is being reduced over a zinc surface. Hydrogen ions are adsorbed on the metal surface they pick up electrons from the metal and are reduced to atoms. The atoms combine to... [Pg.1264]

Macromolecules exchange internal surface hydrogen bonds for hydrogen bonds to water. Entropic forces dictate that macromolecules expose polar regions to an aqueous interface and bury nonpolar regions. [Pg.13]

Ethylene, C2H4, can adsorb in two modes the weaker Jt-bonded ethylene, in which the C=C double bond is above a single metal atom, or the stronger di-cr bonded ethylene in which the two C-atoms of the ethylene molecule bind to two metal atoms (Fig. 6.37). We consider the (111) metal surface. Hydrogen adsorbs dis-sociatively and is believed to reside in the threefold hollow sites of the metal. [Pg.258]

The long tail on the OH stretching band that extends from 3700 to 3400 cm is due to a small amount of residual water adsorbed on the surface. Hydrogen bonding interactions cause the peak to be broad. [Pg.452]

Is the shifting hydrogen or deuterium isolated or protected from the surface hydrogen-deuterium pool And how fast does the hydrogen-deuterium pool equilibrate over the surface To partly answer these questions we consider apopinene. [Pg.254]

Two types of swelling may occur. Surface hydration is one type of swelling in which water molecules are adsorbed on crystal surfaces. Hydrogen bonding holds a layer of water molecules to the oxygen atoms exposed on the crystal surfaces. Subsequent layers of water molecules align to form a quasi-crystalline structure between unit layers which results in an increased c-spacing. All types of clays swell in this manner. [Pg.60]

Figure 3.16 Volcano plot for the hydrogen evolution reaction (HER) for various pure metals and metal overlayers. Values are calculated at 1 barof H2 (298K) and at a surface hydrogen coverage of either 0.25 or 0.33 ML. The two curved lines correspond to the model (3.24), (3.25) transfer coefficients (not included in the indicated equations) of 0.5 and 1.0, respectively, have also been added to the model predictions in the figure. The current values for specific metals are taken from experimental data on polycrystalline pure metals, single-crystal pure metals, and single-crystal Pd overlayers on various substrates. Adapted from [Greeley et al., 2006a] see this reference for more details. Figure 3.16 Volcano plot for the hydrogen evolution reaction (HER) for various pure metals and metal overlayers. Values are calculated at 1 barof H2 (298K) and at a surface hydrogen coverage of either 0.25 or 0.33 ML. The two curved lines correspond to the model (3.24), (3.25) transfer coefficients (not included in the indicated equations) of 0.5 and 1.0, respectively, have also been added to the model predictions in the figure. The current values for specific metals are taken from experimental data on polycrystalline pure metals, single-crystal pure metals, and single-crystal Pd overlayers on various substrates. Adapted from [Greeley et al., 2006a] see this reference for more details.
Now, we consider H, atoms produced from hydrogen molecules adsorbed on zinc oxide under the influence of electron (ion) impact. We suppose that in this case the energy released in interaction of an electron (ion) with an adsorbed molecule is enough to break any bond between hydrogen atoms. As a consequence, Hj atoms bounce apart over the surface. Hydrogen atoms produced in this case are similar to H atoms adsorbed on the oxide surface from the gas phase at small surface coverages. In other words, they can be chemisorbed as charged particles and thus may influence electric conductivity of zinc oxide. This conclusion is consistent with the experimental results. [Pg.276]

Surface hydrogen is conveniently detected by MIR at attenuated-total-internal-reflection prisms of GaAs electrodes. Si-doped (100)-oriented n-GaAs single crystals were employed in the electrochemical cell illustrated schematically in Figure 3.3. [Pg.46]

ERDA (HFS) only requires the addition of a thin foil (of carbon, mylar or aluminium) to separate forward scattered hydrogen from forward scattered primary He++ ions. The analytical information obtained consists of hydrogen concentration versus depth. The sample is tilted so that the He++ beam strikes at a grazing angle, giving a HFS depth profile resolution of about 50 nm. The surface hydrogen content... [Pg.208]

Termination of the plateau at a sufficiently high overpotential. The potential at which a consecutive electrode reaction sets in (e.g., hydrogen evolution in cathodic reactions) is determined by the composition of the electrolyte (specifically, the pH) and by the nature and state of the electrode surface (hydrogen overpotential). The reduction of ferricyanide in alkaline solution on nickel also provides a better-defined plateau in this respect than the deposition of copper in acid solution. [Pg.230]

The initial step of the adsorption of cyclic sulfides on a Mo(100) surface is also the formation of adsorbed thiolate groups.395-397 Adsorbed alkyl thiolates decompose to adsorbed sulfur, carbon, and hydrogen on the clean Mo surface, but once the surface is deactivated by adsorbed sulfur, alkanes and alkenes evolve from the surface. Tetrahydrothiophene (34) and trimethylene sulfide decompose on Mo(110) to alkanes and alkenes by way of a common intermediate, which is proposed to be a surface thiolate (33). The thiolate undergoes hydrogenation or dehydrogenation, depending on the surface hydrogen concentration (Scheme 4.115).398 399... [Pg.181]


See other pages where Surface hydrogenation is mentioned: [Pg.1823]    [Pg.1824]    [Pg.138]    [Pg.132]    [Pg.522]    [Pg.167]    [Pg.423]    [Pg.30]    [Pg.1214]    [Pg.265]    [Pg.274]    [Pg.107]    [Pg.69]    [Pg.82]    [Pg.83]    [Pg.193]    [Pg.199]    [Pg.254]    [Pg.254]    [Pg.255]    [Pg.333]    [Pg.335]    [Pg.537]    [Pg.55]    [Pg.128]    [Pg.138]    [Pg.236]    [Pg.64]    [Pg.24]    [Pg.32]    [Pg.45]    [Pg.51]    [Pg.82]    [Pg.83]    [Pg.85]   
See also in sourсe #XX -- [ Pg.204 ]




SEARCH



Surfaces hydrogen

© 2024 chempedia.info