Surface energy mechanism

Figure 13-13. Test of the surface energy mechanism for the detachment of wear particles (Equation 13-11). Load 19.6 N speed 11 cm/s. Data by E. Rabinowicz [45].

The second model is a quantum mechanical one where free electrons are contained in a box whose sides correspond to the surfaces of the metal. The wave functions for the standing waves inside the box yield permissible states essentially independent of the lattice type. The kinetic energy corresponding to the rejected states leads to the surface energy in fair agreement with experimental estimates [86, 87],... 

Numerous avenues to produce these materials have been explored (128—138). The synthesis of two new fluorinated bicycHc monomers and the use of these monomers to prepare fluorinated epoxies with improved physical properties and a reduced surface energy have been reported (139,140). The monomers have been polymerized with the diglycidyl ether of bisphenol A, and the thermal and mechanical properties of the resin have been characterized. The resulting polymer was stable up to 380°C (10% weight loss by tga). 

Mechanical sensitivity can be divided into two categories—mechanical friction and mechanical shock. Mechanical friction can be defined as mechanical energy imposed by materials being wedged between surfaces and mechanical shock can be defined as mechanical energy imposed by materials undergoing an impact. Several tests for measuring the sensitivity to friction and the impact of materials are detailed in CCPS G-13. 

As it stands, eqn. (7.7) contains too many unknowns. But there is one additional piece of information that we can use. The interfacial energies, Ysl> Yes 7cl ct as surface tensions in just the way that a soap film has both a surface energy and a surface tension. This means that the mechanical equilibrium around the edge of the nucleus can be described by the triangle of forces... 

Section 4.1 briefly describes some of the commonly employed experimental tools and procedures. Chaudhury et al., Israelachvili et al. and Tirrell et al. employed contact mechanics based approach to estimate surface energies of different self-assembled monolayers and polymers. In these studies, the results of these measurements were compared to the results of contact angle measurements. These measurements are reviewed in Section 4.2. The JKR type measurements are discussed in Section 4.2.1, and the measurements done using the surface forces apparatus (SFA) are reviewed in Section 4.2.2. 

As is true for macroscopic adhesion and mechanical testing experiments, nanoscale measurements do not a priori sense the intrinsic properties of surfaces or adhesive junctions. Instead, the measurements reflect a combination of interfacial chemistry (surface energy, covalent bonding), mechanics (elastic modulus, Poisson s ratio), and contact geometry (probe shape, radius). Furthermore, the probe/sample interaction may not only consist of elastic deformations, but may also include energy dissipation at the surface and/or in the bulk of the sample (or even within the measurement apparatus). Study of rate-dependent adhesion and mechanical properties is possible with both nanoindentation and... 

We have recently been exploring this technique to evaluate the adhesive and mechanical properties of compliant polymers in the form of a nanoscale JKR test. The force and stiffness data from a force-displacement curve can be plotted simultaneously (Fig. 13). For these contacts, the stiffness response appears to follow the true contact stiffness, and the curve was fit (see [70]) to a JKR model. Both the surface energy and modulus can be determined from the curve. Using JKR analyses, the maximum pull off force, surface energy and tip radius are... 

The surface energy of silicones, the liquid nature of the silicone polymers, the mechanical properties of the filled networks, the relative insensitivity to temperature variations from well below zero to very high, and the inherent or added reactivity towards specific substrates, are among the properties that have contributed to the success of silicone materials as adhesives, sealants, coatings, encapsulants, etc. 

---