Suppress printing

NOMESSAGES. This card suppresses printing of all of the messages in SOLVE, and many of the messages in other routines, such as data read in by the ROWS control cards. 

Typing a semicolon at the end of an input line suppresses printing of the output of the MATLAB command. The semicolon should generally be used when defining large vectors or matrices (such as X = 1 0.01 3 ). It can also be used in any other situation where the MATLAB output need not be displayed. 

NOTE Notice here how MATLAB shows each command line within the M-file itself. Use echo off to suppress printing out each step, except for statements that do not end up with the suppressing symbol ( ), or for non-suppressible data and graph display (e.g., disp, plot, fplot, fprintf, etc.). 

The following MATLAB session shows a variety of matrix operations. It can be seen again that the sanicolon is used to suppress printing when placed at the end of a command, and it also indicates the end of a row (and the beginning of a new one) in a matrix. The apostrophe is the transposition operator, and the built-in function inv takes the inverse of a matrix. If the inverse does not exist, an error message appears. 

Heico Chemicals is the only producer of acetamide in the United States. Small amounts are imported from Europe and Asia. It is shipped in 32-L (35-gal) dmms weighing about 80 kg. Acetamide appears to have a wide spectmm of appHcations. It suppresses acid buildup in printing inks, lacquers, explosives, and perfumes. It is a mild moisturi2er and is used as a softener for leather, textiles, paper, and certain plastics. It finds some appHcations in the synthesis of pharmaceuticals, pesticides, and antioxidants for plastics. 

Zero-suppressed version is printed using seven digits. 

The user should now be in the MATLAB eommand window, whieh eontains some helpful eomments together with the MATLAB prompt . MATLAB eommands are typed after the prompt, and entered using Return (or Enter ). Terminating the eommand with will suppress the result of the eommand being printed in the eommand window. Comments are preeeded by the % symbol. 

PLD has also been utilized to produce bilayer electrolytes. In one study, aNiO-YSZ (anode support, tape cast)/NiO-SDC (AFL, screen-printed)/ScSZ-SDC (electrolyte bilayer, PLD)/SSC (cathode, screen-printed) cell showed excellent performance (0.5 and 0.9 W/cm2 at 550 and 600°C, respectively), with an OCV of 1.04 V at 600°C, indicating that the PLD technique was successful in depositing a sufficiently dense ScSZ electronic blocking layer to suppress electronic conduction normally observed across single-layer SDC electrolytes, and which typically result in lower OCV values (0.87 V, 600°C) [46, 127],... 

Not to be deterred, Chemist A s legal counsel convinces his client that he should not concede yet. Chemist A s counsel informs his client that he has carefully reread the text of the 102(g) statute and he has cleverly discovered in the fine print that it gives priority to the earlier inventor, but only in cases in which that inventor has not abandoned, suppressed or concealed the invention. Chemist A s side needs only to establish that Chemist B committed one or more of these three sins. Since 102(g) is concerned with priority contests between parties, the guilty party will be put behind the other party and lose the priority contest together with any patent to the contested invention. This begs the question of what it takes for an invention to be abandoned suppressed, or concealed, and, not surprisingly, this is a question of the particular... 

A printout parameter. The code should be written such that if IPR = lihe values of x, are printed after each iteration, while if IPR = 0 the printing is suppressed. 

Step 3 When you use fzero, the function specvol will be evaluated for a variety of v. Thus, it is inconvenient to have the constants printed out on the screen every iteration. To avoid this, you change the function specvol by adding a semi-colon at the end of each line, This suppresses the output. Do this and save the m-file, specvol. 

Note that we have asked for the pH and total aqueous concentrations of As and Zn to be printed out in a special file called surf 12. pun, and suppressed all default output with -reset false. By transferring this file to a spreadsheet, subtracting the As and Zn concentrations from the initial concentrations, and dividing by the initial concentrations, we obtain the fraction of the initial concentration that has been adsorbed onto the HFO. 

SOLVE ordinarily produces a line of output for each iteration, and subroutines such as SCALEC and DELETE normally print a message when they are used. A few extra messages, useful mainly for debugging purposes, are also written into the program and the user may have these printed if he wishes. One may also suppress all of the incidental messages. The. variable PF controls the printing of incidental messages. 

PF is set to a value of 0 nominally by subroutine START. This is called the normal printing mode and will cause the most useful messages to be printed. If extra output is desired, PF should be set to 1 if message suppression is desired, PF should be set to —1. PF is defined as an integer value by the program. 

Exposure. Before the coated wafers are exposed, they undergo a mild bake (called a soft bake) in order to remove the solvent of the resist and to suppress mechanical stress. Once the wafers are soft baked, they are transferred to some type of illumination or exposure system. In the simplest case, an exposure system is a UV lamp illuminating the resist-coated wafer through a mask without any lenses in between. The purpose of the illumination system is to deliver light to the wafer with the proper intensity, directionality, spectral characteristics, and uniformity across the wafer so as to transfer (also print) the mask image as perfectly as possible onto the resist in the form of a latent image. 

Furoxans have been recommended for use as accelerators of sensitized photographic emulsions,528 and as oxidants in color formers.529 Benzo-furoxan, when added to photopolymerizable printed circuit compositions, is said to improve the definition of the image.530 It is also beneficial as a constituent of carbon paper coatings.531 Some substituted benzofuroxans are proposed as inhibitors of styrene polymerization,532 and other furoxans suppress the formation of films on drying oils.280... 

An edited output corresponding to the bcc data in Table 9.2 is given in Sect.9.2.4. In a production run one would normally suppress the printing of the real and reciprocal space vectors and of the structure constants, i.e. NOVCGN = 0 (if one has a suitable set of vectors in VEC/XXX) and NOWRT = 0. 

Novelty and Nonobviousness To be patentable, an invention must be new, useful and not obvious. Section 102 of the Act defines novelty quite technically. An invention is not novel if, before the applicant s invention, the invention was (a) known or used by others in this country ( 102(a)) (b) patented or described in a printed publication anywhere in the world before the applicant s invention ( 102(b)) (c) described in a patent on a United States patent application filed before the applicant s own invention ( 102(e)) or (d) made in this country by another who has not abandoned, suppressed or concealed it ( ... 

The documents must be drawn up, referenced, dated and signed by authorized persons, and according to procedures which, in particular, must define the rules for their creation, modification, suppression, copying (for some documents, in a predetermined number of copies) and distribution. The original documents must be typed or printed and must contain neither alternations nor handwritten comments. Their presentation and pagination must be such the copies may be made without risk of error. 

Ammonium chloride has a number of industrial uses, most importantly in the manufacture of dry-ceU batteries, where it serves as an electrolyte. It is also used to make quarrying explosives, as a hardener for formaldehyde-based adhesives, as a flame suppressant, and in etching solutions in the manufacture of printed circuit boards. Other appHcations include use as a component of fluxes in zinc and tin plating, and for electrolytic refining of zinc. 

---