Supported metal catalysts reactivity

As can be seen, the catalytic process over a zeolite-supported cation, or an oxide-supported cation, can be considered as a supported homogeneous catalysis, as far as adsorbed reactants and products behave like reactive ligands. The model developed for lean DcNO. catalysts over supported cations (function 3), as well as this supported homogeneous catalysis approach, is also suitable for stoichiometric mixture (TWC) comprising CO and H2 as reductants over supported transition metal cations [20-22],... 

Metal oxides are exploited in a number of technologies including gas sensing, microelectronics, and catalysis [1, 2]. A number of oxides directly act as catalysts while many others are employed as supports on which an active metal is dispersed. As there is evidence that the oxide support influences the reactivity of the dispersed metal [3,4], understanding the behavior of oxides becomes important both when they are used as supports and when they are the active component in a catalyst. 

Sections 8.3.1-8.3.3 present the use of iron, mthenium and osmium carbonyls, respectively, in the preparation of supported catalysts. Over non-inert supports, besides the characteristics of carbonyl compounds, the reactivity of the surface and that of the specific element, mainly related with its redox properties, will be covered for each metal. 

General Trends in Metal Complex/Surface Reactivity, and Further Requirements for Metal-Supported Catalyst Preparation... 

A relevant aspect to consider for this goal is to develop metal-oxide catalysts showing ordered interfaces. Onishi and Iwasawa remarked the role of the interfacial chemistry on metal-oxides on the reactivity. Also in metal nanoparticles supported on metal-oxides, the interface between the two plays a relevant catalytic role. ... 

POMs can he immobilized onto anion-exchange resins and surface-modified metal oxides with quaternary ammonium cation- or amino-functional groups via anion-exchange. Jacobs and coworkers tethered Venturello s catalyst [P04(W0(02)2)4]3-on a commercially available nitrate-form resin with alkylammonium cations and have carried out the epoxidation of allylic alcohols and terpenes with this supported catalyst [166, 167]. The regio- and diastereoselectivity of the parent homogeneous catalysts were preserved in the supported catalyst. For bulky alkenes, the reactivity of the POM catalyst was superior to that of Ti- 3 zeolite with a large pore size. The catalytic activity of the recycled catalyst was maintained completely after several cycles. 

Supports used for obtaining Ziegler-Natta catalysts can differ essentially from one another. Some of the supports may contain reactive surface groups (such as hydroxyl groups present in specially prepared metal oxides) while others do not contain such reactive functional groups (such as pure anhydrous metal chlorides). Therefore, the term supported catalyst is used in a very wide sense. Supported catalysts comprise not only systems in which the transition metal compound is linked to the support by means of a chemical covalent bond but also systems in which the transition metal atom may occupy a position in a lattice structure, or where complexation, absorption or even occlusion may take place [28]. The transition metal may also be anchored to the support via a Lewis base in such a case the metal complexes the base, which is coordinatively fixed on the support surface [53,54]. 

Both the discovery of new synthesis processes for nanostructured materials and the demonstration of the highly reactive properties of these materials have increased rapidly within recent years. The new synthesis processes have made available nanostructured materials in a wide variety of compositions of metal oxides and metals supported on metal oxides, which have led to recognition of their exceptional chemical, physical, and electronic properties. The objective of this review is to provide recent results on synthesis of nanostructured materials using the novel processes that were developed in these laboratories recently and to contrast them to other important, new methods. Because some of the most important applications of nanostructured materials are as catalysts for chemical processing, several key reports on enhanced catalytic reactivity of nanostructured grains will be discussed along with the pertinent theory responsible for controlling both activity and selectivity of these new catalysts. 

The simplest supported catalysts are mononuclear metal complexes, exemplified by industrial supported metallocene catalysts, used (with promoters) for alkene polymerization these are the so-called single-site catalysts that are finding wide industrial applications (Kristen, 1999 Kaminsky, 1999 Roscoe et al., 1998). The most common supports are metal oxides and zeolites. The metals in these complexes range from oxophilic (e.g., Zr and Ta) to noble (e.g., Rh). Supported metal complexes are stabilized by ligands—in addition to those provided by the support—such as hydride (H), hydrocarbons, and carbonyl (CO). In a typical supported metal complex, the metal is present in a positive oxidation state. Although some such complexes are relatively stable, most are, befitting their roles as catalysts, highly reactive and air- and moisture-sensitive. 

This unique micro structure can be described as an intermediate stage between a supported catalyst and a bulk metallic sponge or skeletal Raney-type catalyst. It enables a reasonably high dispersion of Cu and exposure of many Cu-ZnO interfaces at a high total Cu content. The specific Cu surface area (SACu) of methanol catalysts can be determined by reactive N20 titration [59, 60], which causes surface oxidation of the Cu particles and allows calculation of SAcu from the amount of evolved N2. The SACu of state-of-the-art methanol synthesis catalysts measured by this method... 

The first Raman spectra of bulk metal oxide catalysts were reported in 1971 by Leroy et al. (1971), who characterized the mixed metal oxide Fe2(MoC>4)3. In subsequent years, the Raman spectra of numerous pure and mixed bulk metal oxides were reported a summary in chronological order can be found in the 2002 review by Wachs (Wachs, 2002). Bulk metal oxide phases are readily observed by Raman spectroscopy, in both the unsupported and supported forms. Investigations of the effects of moisture on the molecular structures of supported transition metal oxides have provided insights into the structural dynamics of these catalysts. It is important to know the molecular states of a catalyst as they depend on the conditions, such as the reactive environment. 

---