Sulfur tetrafluoride reactions

Thionyl fluoride, as by-product in sulfur tetrafluoride reactions, 41, 105 toxidty of, 41,105 Thiophene-2-OL, 43, 55 2(5H)-Thiophenone, 43, 55 Thiosemicarbazide, in synthesis of 1,2,4 triazole, 40, 99 reaction with formic acid to yield l-formyl-3-thiosemicarbazide, 40,99... 

Nonmeta.ls, Sulfur reacts with fluorine to yield the remarkably stable sulfur hexafluoride, SF. Operating conditions must be controlled because a mixture of the lower fluorides such as disulfur difluoride [13709-35-8] 2 2 disulfur decafluoride [5714-22-7] 2 10 sulfur tetrafluoride [7783-60-0] SF4, may also be formed. When this reaction is carried out between 310 and 340°C, SF is primarily obtained and essentially no SF and only trace amounts of lower fluorides. Below 300°C, and preferably at ca 275°C, SF is the primary product. At 450—500°C, a mixture comprising ca 50% SF and the lower sulfur fluorides is formed (see Fluorine compounds, inorganic-sulfur). 

Sulfur tetrafluoride [7783-60-0] SF, replaces halogen in haloalkanes, haloalkenes, and aryl chlorides, but is only effective (even at elevated temperatures) in the presence of a Lewis acid catalyst. The reagent is most often used in the replacement of carbonyl oxygen with fluorine (15,16). Aldehydes and ketones react readily, particularly if no alpha-hydrogen atoms are present (eg, benzal fluoride [455-31-2] from benzaldehyde), but acids, esters, acid chlorides, and anhydrides are very sluggish. However, these reactions can be catalyzed by Lewis acids (HP, BF, etc). 

Depending on the ring substituent, trifluoromethoxyben2enes can be made by the sequential chlorination—fluorination of anisole(s) (351—354). A one-step process with commercial potential is the BF (or SbF2)-cataly2ed reaction of phenol with carbon tetrachloride/hydrogen fluoride (355). Aryl trifluoromethyl ethers, which may not be accessible by the above routes,may be made by fluorination of aryl fluoroformates or aryl chlorothioformates with sulfur tetrafluoride (348) or molybdenum hexafluoride (356). 

Reaction of Carbonyl Compounds with Sulfur Tetrafluoride... 

The recent discovery of a convenient synthesis of sulfur tetrafluoride from sulfur dichloride and sodium fluoride in acetonitrile invited the application of this reagent in fluorination reactions. Hasek, Smith and Engelhardt showed that carboxylic acids and their derivatives can be converted into trifluoromethyl derivatives and that aldehydes and ketones are converted into 5 em-difluoro compounds. They also observed that the reaction was acid... 

Mechanism Several possible pathways for the reaction have been proposed by Hasek et alP and by Martin and Kagan, one of which is presented here. It takes cognizance of the fact that a significant concentration of hydrogen fluoride is essential for the reaction. Since definite interaction or compound formation between covalent fluorides and sulfur tetrafluoride is known to... 

Replacement of ketones with fluorine by reaction with sulfur tetrafluoride-hy-drogen fluoride, 471... 

A nonconventional synthesis of the known inhalation anaesthetic, 2-bromo-2 chloro-l,l,l-trifluoroethane (Halothane), based on the reaction of ethyl 1,2 di bromo-1,2-dicliloroethyl ether with anhydrous hydrogen fluoride and sulfur tetrafluoride, has been patented The reaction presumably involves cleavage of the ether linkage, followed by fluorination of the intermediate bromochloroacetyl halide with sulfur tetrafluoride, ethyl halides are the by-products [2] (equation 2)... 

Reactions of alcohols with sulfur tetrafluoride, because of decomposition and/or polymerization, usually do not give fluorinated products However, in the presence of a hydrogen fluoride scavenger like triethylamine or pyridine, even such sensitive substrates as benzylic alcohols [555], 2-phenylethanol, and 2-furylmethanol [554] can be fluorinated to give the expected fluoro derivatives (equation 73)... 

The reaction of 1,2-diols with sulfur tetrafluoride leads to fluorosulfites, which on hydrolysis, give monofluoro alcohols [555] (equation 74)... 

Polyhalodiethyl ethers are also formed in the reaction of sulfur tetrafluoride with perhaloacetaldehydes in the case of chloral, a chlorine-fluorine rearrangement occurs [I7Q] (equations 82 and 83). 

Participation of fluorocarbocations, derived from carboxylic acids and from halo acetones, in reactions of carbonyl compounds with sulfur tetrafluoride has been directly evidenced by trapping them with aromatic hydrocarbons [207, 20S],... 

Reactions of alkanedicarboxylic acids with sulfur tetrafluoride afford, in general, mixtures of bis(trifluorQmethyI)allcanes, cyclic 0(,a,a, a -tetrafluoro ethers, linear bis(pentafluoroalkyl) ethers, and polyfluoroethers The cyclic ethers constitute the major products of the reactions with alkane-1,2 dicarboxyhc acids, they are also formed in the reactions with alkane-1,3-dicarboxylic acids but not with 1,1- nor 1,4-dicarboxylic acids [211] (equation 105)... 

An illustration of the tendency of alkane 1,2- and alkane-1,3-dicarboxylie acids to a ring closure during the reaction with sulfur tetrafluoride is the reaction of propane-1,2,3-tricarboxylie acid The corresponding six- and five-membered cyclic ethers are formed in a 1 4 ratio [211] (equation 106)... 

The reaction of cyclohexane-cw-1,2-dicarboxylic acid with sulfur tetrafluoride affords the correspoding cyclic ether in a 70% yield with very limited formation of the bis(trifluoromethyl) derivative [2IJ] (equation 107)... 

The reaction ot tormamides with sulfur tetrafluoride in the presence of potassium fluoride leads to replacement of both carbonyl oxygen and hydrogen with fluorine. The formyl group is directly converted into the trifluoromethyl group A-(trifluoromethyl)amines are formed in near quantitative yields [233] (equation 121)... 

These reactions differ from those of sulfur tetrafluoride with carbonyl compounds in that a formal oxidation-reduction of the sulfur atoms m the thiocarbonyl compound and sulfur tetrafluoride molecule occurs, resulting in the formation of free sulfur and the complete utilization of the fluorine atoms in sulfur tetrafluoride. 

Carbon disulfide gives an essentially quantitative yield of carbon tetralluoride and sulfur on reaction with sulfur tetrafluoride at 450 C in the presence of arsenic trifluoride as a catalyst. At lower temperature, bis(fnfiuoromethyl) polysulfides are formed [//] (equation 15). 

Heptadecanoic acid, 43,39 Heptane, 1,1,1-trifluoro, 41, 104 Heptanoic acid, 3-methyl-, 41, 60 Heptanoic add, reaction with sulfur tetrafluoride, 41,104 1-Hepten4-ol, 4,6-dimethyl-, 41,30 Hexachloroacetone, reaction with aniline to form ,M,a-trichloroacet-anilide, 40,103... 

Many aldehydes and ketones have been converted to g m-difluoro compounds with sulfur tetrafluoride (SF4), " including quinones, which give 1,1,4,4-tetra-fluorocyclohexadiene derivatives. With ketones, yields can be raised and the reaction temperature lowered, by the addition of anhydrous HF. Carboxylic acids, acyl chlorides, and amides react with SF4 to give 1,1,1-trifluorides. In these cases the first product is the acyl fluoride, which then undergoes the ge i-difluorination reaction ... 

C21-0008. Sulfur tetrafluoride fluorinates boron trichloride according to the following unbalanced equation BCI3 + SF4 BF3 + SCI2 + CI2 This is both a redox reaction and a metathesis reaction, (a)... 

A series of reactions with gases have been selected for the rapid quantification of many of the major products from the oxidation of polyolefins. Infrared spectroscopy is used to measure absorptions after gas treatments. The gases used and the groups quantified include phosgene to convert alcohols and hydroperoxides to chloroformates, diazomethane to convert acids and peracids to their respective methyl esters, sulfur tetrafluoride to convert acids to acid fluorides and nitric oxide to convert alcohols and hydroperoxides to nitrites and nitrates respectively. 

In some cases it is possible to differentiate between the various alkyl substituents. Primary, secondary and tertiary nitrates and nitrites all show clearly different infrared absorptions. The spectra of acid fluorides can be used to differentiate chain-end groups from pendant acid groups. Furthermore, the loss of all -OH species upon sulfur tetrafluoride exposure allows the reliable estimation of ketones, esters and lactones without the complication of hydrogen-bonding induced shifts in the spectra. Preliminary results from the use of these reactions to characterize y-ray oxidized polyethylene and polypropylene are used to illustrate the scope of the methods. 

Hydroxymethyl)furan, Triethylamine Jenzen, A. F. et al., J. Fluorine Chem., 1988, 38, 205-208 Reaction of sulfur tetrafluoride with 2-hydroxymethylfuran in presence of triethylamine at —50°C is explosive in absence of a solvent. 

The chemistry of the sulfur diimides (65) has been investigated in some detail, because such compounds might act as S—N or N—S—N transfer agents and thus allow access to novel heterocyclic systems. They are generally prepared by the action of sulfur tetrafluoride on primary amines.90 Some of their reactions parallel those of the /V-sulfinylamines— for example, the... 

Sulfur tetrafluoride is a fluorinating agent that undergoes many useful reactions, with some examples being the following ... 

Sulfur tetrafluoride is produced in several reactions with fluorinating agents such as IF7. 

---