Sulfur-nitrogen compounds methane

A flow diagram for the system is shown in Figure 5. Feed gas is dried, and ammonia and sulfur compounds are removed to prevent the irreversible buildup of insoluble salts in the system. Water and soHds formed by trace ammonia and sulfur compounds are removed in the solvent maintenance section (96). The pretreated carbon monoxide feed gas enters the absorber where it is selectively absorbed by a countercurrent flow of solvent to form a carbon monoxide complex with the active copper salt. The carbon monoxide-rich solution flows from the bottom of the absorber to a flash vessel where physically absorbed gas species such as hydrogen, nitrogen, and methane are removed. The solution is then sent to the stripper where the carbon monoxide is released from the complex by heating and pressure reduction to about 0.15 MPa (1.5 atm). The solvent is stripped of residual carbon monoxide, heat-exchanged with the stripper feed, and pumped to the top of the absorber to complete the cycle. 

Emissions to the atmosphere from ammonia plants include sulfur dioxide (SOj), nitrogen oxides (NOJ, carbon monoxide (CO), carbon dioxide (COj), hydrogen sulfide (HjS), volatile organic compounds (VOCs), particulate matter, methane, hydrogen cyanide, and ammonia. The two primary sources of pollutants, with typical reported values, in kilograms per ton (kg/t) for the important pollutants, are as follows ... 

Land/atmospheric interfacial processes which impact climate and biological activity on earth are illustrated in Figure 3. Emissions of carbon dioxide, methane, nitrogen dioxide, and chlorofluorocarbons (CFCs) have been linked to the transmission of solar radiation to the surface of the earth as well as to the transmission of terrestrial radiation to space. Should solar radiation be an internal process or an external driver of the hydrologic cycle, weather, and air surface temperatures Compounds of sulfur and nitrogen are associated with acidic precipitation and damage to vegetation, aquatic life, and physical structures. 

Biodegradation. Under aerobic conditions, biodegradation results in the mineralization of an organic compound to carbon dioxide and water and—if the compound contains nitrogen, sulfur, phosphorus, or chlorine—with the release of ammonium (or nitrite), sulfate, phosphate, or chloride. These inorganic products may then enter well-established geochemical cycles. Under anaerobic conditions, methane may be formed in addition to carbon dioxide, and sulfate may be reduced to sulhde. 

---