Styrene transfer catalyzed

In conclusion, phase transfer catalyzed Williamson etherification and Wittig vinylation provided convenient methods for the synthesis of polyaromatics with terminal or pendant styrene-type vinyl groups. Both these polyaromatics appear to be a very promising class of thermally reactive oligomers which can be used to tailor the physical properties of the thermally obtained networks. Research is in progress in order to further elucidate the thermal polymerization mechanism and to exploit the thermodynamic reversibility of this curing reaction. 

One of the most useful classes of metal and phase transfer catalyzed reactions are carbonylation reactions. Cobalt carbonyl is a valuable catalyst for such processes(1 ). When used in conjunction with methyl iodide, acetylcobalt carbonyl [CH3C0Co(C0) ] is generated and can undergo addition to various unsaturated substrates including alkynes and Schiff bases. In addition, one can add this species to styrene oxides to give the enol... 

Bauld and coworkers studied the [2+2] cycloaddition of A-vinyl carbazoles 86a and electron-rich styrenes 86b catalyzed by iron(III) catalysts A or B in the presence of 2,2 -bipyridine as a ligand, which was reported originally by Ledwith and coworkers (Fig. 21) [142, 143]. Deuterium-labeling studies provided support for the stepwise nature of the process, consisting of reversible SET oxidation of the electron-rich olefin to a radical cation 86 A. Nucleophilic addition of excess 86 leads to distonic radical cation 86B, which cyclizes to cyclobutane radical cation 86C. Back electron transfer affords cyclobutanes 87 and regenerates the catalyst. Photoelectron transfer catalysis gave essentially the same result, thus supporting the pathway. 

The synthesis strategy for y/alcohols is depicted in Figurel 1,6a and 11.6b. 5/alcohols were converted into monomers or attached to polymer chains by several subsequent reactions. Etherification with allyl bromide resulted in allyl ethers [54] (Figure 11.6c). Phase transfer-catalyzed etherification of y/alcohols and p-(chloromethyl) styrene yielded y/styrene [35] (Figure 11.6d). By reaction with (meth)acryloyl chloride, sf (meth)acrylates were obtained, a method that was widely employed [36, 55, 56] (Figure 11.6e). Besides, the reaction of isocyanatoethyl (meth)acrylate with ... 

In addition to their direct use, chloromethyl groups are readily modified into other functional groups. The more important functional groups that have been introduced via chloromethyl groups are shown in Table 2-2. Modification reactions may also be phase-transfer catalyzed (Frechet et al., 1979). Other functional groups may be directly introduced into the styrene support polymer by well-known reaction sequences (Table 2-3) (Patterson, 1971 Frechet and Farrall, 1977). 

This is one of the steps in the copper-catalyzed redox-transfer chain addition of arenesulfonyl chlorides to styrenes (vide infra). The p-value of + 0.56 indicates the involvement of a simple atom transfer as well as a polar contribution to the transition state. 

Ruthenium porphyrin complexes are also active in cyclopropanation reactions, with both stoichiometric and catalytic carbene transfer reactions observed for Ru(TPP)(=C(C02Et)2> with styrene. Ru(Por)(CO)orRu(TMP)(=0)2 catalyzed the cyclopropanation of styrene with ethyidiazoacetate, with aiiti.syn ratios of 13 1... 

For SCVP of styrenic inimers, the mechanism includes cationic (14 [18], 19 [29]), atom transfer radical (15 [22, 27]), nitroxide-mediated radical (16 [21]), anionic (20 [19]), photo-initiated radical (17 [2], 18 [52-55]), and ruthenium-catalyzed coordinative (21 [56]) polymerization systems. Another example in-... 

Block copolymers were synthesized by a combination of fipase-catalyzed polymerization and atom transfer radical polymerization (ATRE). " " At first, the polymerization of 10-hydroxydecanoic acid was carried out by using lipase CA as catalyst. The terminal hydroxy group was modified by the reaction with a-bromopropionyl bromide, followed by ATRP of styrene using CuCE2,2 -bipyridine as catalyst system to give the polyester-polystyrene block copolymer. Trichloromethyl-terminated poly(e-CL), which was synthesized by lipase CA-catalyzed polymerization with 2,2,2-trichloroethanol initiator, was used as initiator for ATRP of styrene. 

Meerwein Arylation Reactions. Aryl diazonium ions can also be used to form certain types of carbon-carbon bonds. The copper-catalyzed reaction of diazonium ions with conjugated alkenes results in arylation of the alkene, known as the Meerwein arylation reaction.114 The reaction sequence is initiated by reduction of the diazonium ion by Cu(I). The aryl radical adds to the alkene to give a new (3-aryl radical. The final step is a ligand transfer that takes place in the copper coordination sphere. An alternative course is oxidation-deprotonation, which gives a styrene derivative. 

Alkyl Co oxime complexes have been used as chain transfer catalysts in free radical polymerizations.866,867 Regioselective hydronitrosation of styrene (with NO in DMF) to PhCMe=NOH is catalyzed by Co(dmg)2(py)Cl in 83% yield.868,869 Catalytic amounts of the trivalent Co(dmg2tn)I2 (192) (X = I) generate alkyl radicals from their corresponding bromides under mild reaction conditions, allowing the selective preparation of either saturated or unsaturated radical cyclization products.870... 

Intramolecular oxonium ylide formation is assumed to initialize the copper-catalyzed transformation of a, (3-epoxy diazomethyl ketones 341 to olefins 342 in the presence of an alcohol 333 . The reaction may be described as an intramolecular oxygen transfer from the epoxide ring to the carbenoid carbon atom, yielding a p,y-unsaturated a-ketoaldehyde which is then acetalized. A detailed reaction mechanism has been proposed. In some cases, the oxonium-ylide pathway gives rise to additional products when the reaction is catalyzed by copper powder. If, on the other hand, diazoketones of type 341 are heated in the presence of olefins (e.g. styrene, cyclohexene, cyclopen-tene, but not isopropenyl acetate or 2,3-dimethyl-2-butene) and palladium(II) acetate, intermolecular cyclopropanation rather than oxonium ylide derived chemistry takes place 334 ). 

Chiral thioureas have been synthesized and used as ligands for the asymmetric hydroformylation of styrene catalyzed by rhodium(I) complexes. The best results were obtained with /V-phenyl-TV -OS )-(l-phenylethyl)thiourea associated with a cationic rhodium(I) precursor, and asymmetric induction of 40% was then achieved.387,388 Chiral polyether-phosphite ligands derived from (5)-binaphthol were prepared and combined with [Rh(cod)2]BF4. These systems showed high activity, chemo- and regio-selectivity for the catalytic enantioselective hydroformylation of styrene in thermoregulated phase-transfer conditions. Ee values of up to 25% were obtained and recycling was possible without loss of enantioselectivity.389... 

The cis alkenes are more reactive and more selective than their trans counterparts. As with the Evans system, this reaction is not stereospecific. Acyclic cis alkenes provide mixtures of cis and trans aziridines. cis-p-Methylstyrene affords a 3 1 ratio of aziridines favoring the cis isomer, Eq. 67, although selectivity is higher in the trans isomer. A fascinating discussion of this phenomenon, observed in this system as well as the Mn-catalyzed asymmetric oxo-transfer reaction, has been advanced by Jacobsen and co-workers (83). Styrene provides the aziridine in moderate selectivity, Eq. 68, not altogether surprising since bond rotation in this case would lead to enantiomeric products. 

The reaction is reversible and therefore the products should be removed from the reaction zone to improve conversion. The process was catalyzed by a commercially available poly(styrene-divinyl benzene) support, which played the dual role of catalyst and selective sorbent. The affinity of this resin was the highest for water, followed by ethanol, acetic acid, and finally ethyl acetate. The mathematical analysis was based on an equilibrium dispersive model where mass transfer resistances were neglected. Although many experiments were performed at different fed compositions, we will focus here on the one exhibiting the most complex behavior see Fig. 5. 

In order to keep the mild conditions, hydroxycarbonylation has been performed in biphasic media, maintaining the catalyst in the aqueous phase thanks to water-soluble mono- or diphosphine ligands. In the presence of the sodium salt of trisulfonated triphenylphosphine (TPPTS), palladium was shown to carbonylate efficiently acrylic ester [19], propene and light alkenes [20,21] in acidic media. For heavy alkenes the reduced activity due to the mass transfer problems between the aqueous and organic phases can be overcome by introducing an inverse phase transfer agent, and particularly dimeihyl-/-i-cyclodextrin [22,23]. Moreover, a dicationic palladium center coordinated by the bidentate diphosphine ligand 2,7-bis(sulfonato)xantphos (Fig. 2) catalyzes, in the presence of tolylsulfonic acid for stability reasons, the hydroxycarbonylation of ethylene, propene and styrene and provides a ca. 0.34 0.66 molar ratio for the two linear and branched acids [24],... 

Ruthenium(II)-NHC systems ean be used for atom transfer radical polymerization (ATRP). Generally, similar results as for the analogous phosphine complexes are obtained. For the ATRP of styrene and methyl methacrylate (MMA) [(NHC)2peBr2] was found to rival copper(I)-based systems and to yield poly (MMA) with low polydispersities. Polymerizations based on olefin metathesis that are catalyzed by ruthenium-NHC complexes are discussed separately vide supra). 

---