Structure sulfone

Fenton test (3% H2O2 solution containing 2 ppm FeS04) results for sul-fonated aromatic polymers have also been reported. The stability of sulfonated aromatic polymers depends on backbone structure, sulfonation degree, and testing temperature. For polyimides, the time before the polymer is totally dissolved ranges from several minutes to 9 hours at or as... 

According to the backbone structures, sulfonated hydrocarbon PEMs can be classified as sulfonated polystyrene copolymers... 

The SL, a ring-structured sulfone, is more tolerant to high-voltage operation than any carbonates. However, this new electrol3 e system needs to be further improved because the EMC is more volatile than SL and less durable to reflow soldering at elevated temperatures. 

Keywords Degradation Fuel cells Polymer synthesis Proton exchange membranes Structure Sulfonated polyimides Transport properties... 

Uchida M, Tanizaki T, Gda T and Ka]iyama T 1991 Control of surface chemical-structure and functional property of Langmuir-Blodgett-film composed of new polymerizable amphiphile with a sodium-sulfonate Maoromoieouies 24 3238-43... 

Acetamidothiazole and its 4-alkyl derivatives react with chloro-sulfonic acid. The structure of the resulting products was a subject of controversy (172. 393-397). N-acetyl-A -(2-thiazolyl)-sulfamoyl chlorides (189) first proposed were then shown to be 2-acetamido-5-chloro-sulfonylthiazoles (190) (Scheme 120) (367. 368. 398). the latter assignment is based on infrared (368) and chemical evidence (367). 

The hydrolysis of sulfonate esters of 2 octanol is stereospecific and proceeds with complete inversion of configuration Write a structural formula that shows the stereochemistry of the 2 octanol formed by hydrolysis of an opti cally pure sample of (S) (+) 1 methylheptyl p toluenesulfonate identify the prod uct as / or S and deduce its specific rotation... 

When benzene is prepared from coal tar it is contaminated thiophene from which it cannot be separated by distillation because of very similar boiling points Shaking a mixture of benzene and thiophene with sulfuric acid causes sulfonation of the thiophene ring but leaves benzene untouched The sulfonation product of thiophene dissolves m the sulfuric acid layer from which the benzene layer is separated the benzene layer is then washed with water and distilled Give the structure of the sulfonation product of thiophene... 

Oxidation of 4 ten butylthiane (see Problem 16 23 for the structure of thiane) with sodium metaperiodate gives a mixture of two compounds of molecular formula CpHigOS Both products give the same sulfone on further oxidation with hydrogen peroxide What is the relationship between the two compounds ... 

Fig. 3. Typical Markush structure where R is H, C 2o kylj i-20 sulfonate, or carboxylate is H or alkyl and X is H, alkyl, phenyl...

The classical structures of pyrrole, furan and thiophene (31) suggest that these compounds might show chemical reactions similar to those of amines, ethers and thioethers (32) respectively. On this basis, the initial attack of the electrophile would be expected to take place at the heteroatom and lead to products such as quaternary ammonium and oxonium salts, sulfoxides and sulfones. Products of this type from the heteroaromatic compounds under consideration are relatively rare. 

Two substituents on two N atoms increase the number of diaziridine structures as compared with oxaziridines, while some limitations as to the nature of substituents on N and C decrease it. Favored starting materials are formaldehyde, aliphatic aldehydes and ketones, together with ammonia and simple aliphatic amines. Aromatic amines do not react. Suitable aminating agents are chloramine, N-chloroalkylamines, hydroxylamine-O-sulfonic acid and their simple alkyl derivatives, but also oxaziridines unsubstituted at nitrogen. Combination of a carbonyl compound, an amine and an aminating agent leads to the standard procedures of diaziridine synthesis. 

The role of IR spectroscopy in the early penicillin structure studies has been described (B-49MI51103) and the results of more recent work have been summarized (B-72MI51101). The most noteworthy aspect of a penicillin IR spectrum is the stretching frequency of the /3-lactam carbonyl, which comes at approximately 1780 cm" This is in contrast to a linear tertiary amide which absorbs at approximately 1650 cm and a /3-lactam which is not fused to another ring (e.g. benzyldethiopenicillin), which absorbs at approximately 1740 cm (the exact absorption frequency will, of course, depend upon the specific compound and technique of spectrum determination). The /3-lactam carbonyl absorptions of penicillin sulfoxides and sulfones occur at approximately 1805 and 1810 cm respectively. The high absorption frequency of the penicillin /3-lactam carbonyl is interpreted in terms of the increased double bond character of that bond as a consequence of decreased amide resonance, as discussed in the X-ray crystallographic section. Other aspects of the penicillin IR spectrum, e.g. the side chain amide absorptions at approximately 1680 and 1510 cm and the carboxylate absorption at approximately 1610 cm are as expected. 

Oxetane, 3,3-bis(trimethylaminomethyl)-methane sulfonate X-ray crystal structure, 7, 365 Oxetane, 3-bromo-synthesis, 7, 390 Oxetane, 2-t-butyl-3-methyl-synthesis, 7, 399 Oxetane, 2-chloro-reactions, 7, 390 Oxetane, 3-chloro-synthesis, 7, 390... 

---