Structure hydroperoxides

The parent indolo[2,3-fl]carbazole (1) has also been the subject of a study probing its reactivity toward oxidizing agents. One of the substrates involved, namely 85 (prepared from 1 and 2,5-dimethoxytetrahydrofuran in the presence of acid), was subjected to treatment with m-chloroperbenzoic acid, to give the dione 86 as the major product and a sensitive compound assigned the hydroxy structure 87. A cleaner reaction took place when 85 underwent oxidation with tert-butyl hydroperoxide assisted by VO(acac)2, to produce 86 exclusively in 86% yield. Likewise, A,N -dimethylindolo[2,3-fl]carbazole furnished the dione 88 on treatment with this combination of reagents (96J(X 413). 

Organic peroxide-aromatic tertiary amine system is a well-known organic redox system 1]. The typical examples are benzoyl peroxide(BPO)-N,N-dimethylani-line(DMA) and BPO-DMT(N,N-dimethyl-p-toluidine) systems. The binary initiation system has been used in vinyl polymerization in dental acrylic resins and composite resins [2] and in bone cement [3]. Many papers have reported the initiation reaction of these systems for several decades, but the initiation mechanism is still not unified and in controversy [4,5]. Another kind of organic redox system consists of organic hydroperoxide and an aromatic tertiary amine system such as cumene hydroperoxide(CHP)-DMT is used in anaerobic adhesives [6]. Much less attention has been paid to this redox system and its initiation mechanism. A water-soluble peroxide such as persulfate and amine systems have been used in industrial aqueous solution and emulsion polymerization [7-10], yet the initiation mechanism has not been proposed in detail until recently [5]. In order to clarify the structural effect of peroxides and amines including functional monomers containing an amino group, a polymerizable amine, on the redox-initiated polymerization of vinyl monomers and its initiation mechanism, a series of studies have been carried out in our laboratory. 

Thus, chelates are able to dissipate the radiation harmlessly as infrared radiations or heat through resonating structures. Carlsson and Wiles [22] have confirmed in their studies that the quencher slowly migrate through the solid polymer destroying the hydroperoxide group. 

Oxidation of C12-C14 n-paraffms using boron trioxide catalysts was extensively studied for the production of fatty alcohols.Typical reaction conditions are 120-130°C at atmospheric pressure. ter-Butyl hydroperoxide (0.5 %) was used to initiate the reaction. The yield of the alcohols was 76.2 wt% at 30.5% conversion. Fatty acids (8.9 wt%) were also obtained. Product alcohols were essentially secondary with the same number of carbons and the same structure per molecule as the parent paraffin hydrocarbon. This shows that no cracking has occurred under the conditions used. The oxidation reaction could be represented as ... 

The mechanism for such a process was explained in terms of a structure as depicted in Figure 6.5. The allylic alcohol and the alkyl hydroperoxide are incorporated into the vanadium coordination sphere and the oxygen transfer from the peroxide to the olefin takes place in an intramolecular fashion (as described above for titanium tartrate catalyst) [30, 32]. 

The last step is hydrolysis of the unstable hemiacetal. Alkoxycarbocation intermediates (73, R=alkyl) have been isolated in superacid solution at low temperatures, and their structures proved by The protonated hydroperoxides... 

It has been established that carotenoid structure has a great influence in its antioxidant activity for example, canthaxanthin and astaxanthin show better antioxidant activities than 3-carotene or zeaxanthin. 3- 3 3-Carotene also showed prooxidant activity in oil-in-water emulsions evaluated by the formation of lipid hydroperoxides, hexanal, or 2-heptenal the activity was reverted with a- and y-tocopherol. Carotenoid antioxidant activity against radicals has been established. In order of decreasing activity, the results are lycopene > 3-cryptoxanthin > lutein = zeaxanthin > a-carotene > echineone > canthaxanthin = astaxanthin. ... 

Generally speaking, the danger from ether is not related to its propensity to form a hydroperoxide or to the structure of the compound form, but to the propensity of this hydroperoxide to form a mono-, di- or triperoxide. 

Garssen, G.J., Vliegenthart, J.F.G. and Boldingh, J. (1972). The origin and structures of dimeric fetty acids from the anaerobic reaction between soya-bean lipoxygenase, linoleic acid and its hydroperoxide. Biochem. J. 130, 435-442. 

Fig. 12.14. Competing cis abstraction and trans abstraction transition structures for hydroperoxide formation 2-methyl-2-butene. Adapted J. Am. Chem. Soc., 125, 1319 (2003), by permission of the American Chemical Society.

C(C=0)C1 group to the precise structure (primary, secondary or tertiary) of the alkyl groups to which it is linked. However, our subsequent work with NO showed that its products are also sensitive to the alkyl structure yet in addition NO reacts with oxidized polymers to give distinctly different products from alcohol and hydroperoxide groups (see below). Consequently the COCl2 products were not explored further. 

Thermal decomposition of dialkyl peroxides, diacyl peroxides, hydroperoxides and peracids depending on the structure of the peroxidic compound occurs in a measurable rate usually above 60°C. Diacyl peroxides and peracids are considerably less stable than dialkyl peroxides and hydroperoxides. 

One important point should be stressed here the efficiency of any stabilizing system depends very much on the removal or depletion of the defect structures in the polymer. An example is shown in Figure 1 where the case 5 mechanism vide supra) of a synergistic mixture is theoretically depicted [7]. The line 2 shows that the effect of the synergistic mixture of two antioxidants on thermo-oxidation stability is negligible, if there occurs a relatively significant initiation of oxidation reaction in a way independent from the route taking place via hydroperoxides. 

The quality of the polymer, its photo-oxidation and thermo-oxidation history expressed in concentration of hydroperoxides, carbonyl groups or of other oxidized structures and terminal groups. The rate of an oxidative attack may then be related to the average molar mass and to its distribution, and to the ratio of amorphous/crystalline structures. Polymers cannot be simply ordered according to the intensity of light emission at a given temperature. The chemiluminescence-time patterns are related with the rate of sample oxidation, but they may differ from one to the next polymer. 

The degradation process has a free radical mechanism. It is initiated by free radicals P that appear due to, for example, hydroperoxide decomposition induced thermally or by trace amounts of metal ions present in the polysaccharide. One cannot exclude even direct interaction of the polysaccharide with oxygen in its ground triplet state with biradical character. Hydroperoxidic and/or peracid moieties are easily formed by oxidation of semiacetal chain end groups. The sequence of reactions on carbon 6 of polysaccharide structural unit that ultimately may lead to chemiluminescence is shown in Scheme 11. 

---