Structural Design Concerns

If material is located away from a neutral axis, the part can be stiffened. This technique increases the moment of inertia of the cross section [14], Basically, this relationship is 

of Workers per Machine Direct Labor Cost per Worker Percentage of Indirect Labor Cost 

9- Indirect Labor Cost Total Labor Time Rate 

Total Cycle Time Manufacturing Cost per Piece 

Total Cost Total Cost for 1 Piece /Piece 0.80 

---

Molecular theories are fundamental in assisting material producers to develop more ESC-resistant materials. However, where load-bearing structures are concerned, an engineering approach to ESC capable of setting up suitable design criteria is required. This should result in the safety of the structure being at an acceptable level with reasonable confidence. Such criteria make use of fracture mechanics and its critical stress intensity factor paramenter, Kic. 

An important macroscopic structural aspect concerns the arrangement and the contact design of the current collector, which has to supply the electrons from/to an external electrical circuit. These electrons are due to the driving redox reactions at or within the electrodes. Direct electron transfer between dissolved redox partners, e.g., in the... 

When designing perfusion based microfluidic cell culture chips, the primary areas of concern are the type of flow profile a system generates and an appropriate approach for fluid delivery into the system that facilitates the planned cell based experiments. Upon making a structural design that meets the set requirements, the subsequent step comprises the choice of material and method of fabrication suitable for the chosen material. 

Generic Safety Issue (GSI) B-05 in NUREG-0933 (Reference 1), identifies two concerns relating to containment design. First, that sufficient information is not available to predict the behavior of two-way reinforced concrete slabs and second, that the structural design of a steel containment vessel subjected to unsymmetrical dynamic loadings may be governed by the instability of the shell. 

There are three geometrical requirements on the designated structure. These concern the surface of the braid, the cross-sectional geometry and the transition of the bifurcation. 

---